Manual.ly Logo

Audison TH K2 II P Coro Manual

0.0 · 0 Ratings

PDF manual · 36 Pages

English

M: OA-GPT-54-NAN
page

/ 36

Loading...
432417dcbfd404ca1e11ee3d7e486625de89 page 1e
30
SUGGESTED ACTIVE FILTERING: Best Envelopment
TH 6.5 II
Sax
Lo-pass 2.5 kHz @ 6 dB/Oct.
Butterworth, level 0 dB
Woofer Setup
1 kHz
TH K2 II CORO A - TH 6.5 II Sax + TH 1.5 II Violino Active
Best Envelopment
This set-up provides the best sound stage envelopment for
listeners who prefer vertical stage well distributed along the
full cabin height.
System Setup
TH 1.5II
violino
TH 6.5II
violino
1 kHz
-6 dB
-8 dB
÷
TH 1.5 II
Violino
Tweeter Setup
Hi-pass 2.75 kHz @ 12 dB/Oct.
Butterworth, level -6 dB ÷ -8 dB
1 kHz
-6 dB
-8 dB
÷

Chat with your Audison TH K2 II P Coro manual using AI

Get instant AI answers from your Audison TH K2 II P Coro manual

Ask anything about the Audison TH K2 II P Coro. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend TH K2 II P Coro?

Yes No

Frequently Asked Questions

A

Choose a location that does not interfere with the vehicle's normal mechanical or electrical operation. Avoid areas exposed to water, excessive humidity, dust, or dirt. The guide also states not to perform installations inside the engine compartment.

Is this answer helpful?

A

Because a component that loosens while driving can cause serious injury to passengers and damage to other vehicles. Secure mounting to the vehicle structure and any custom supports helps ensure stability during movement.

Is this answer helpful?

A

Yes. Wear protective eyewear when using tools, since splinters or product residue can become airborne. This is part of the guide's overall safety approach during installation work.

Is this answer helpful?

A

No. The guide specifically instructs not to install the tweeter without the protective grille in front of the dome. Use the grille as intended to ensure proper protection.

Is this answer helpful?

A

Use cables with the proper AWG section for the applied power. Keep wiring away from sharp edges, and do not route near moving mechanical parts or near electronic/mechanical device areas. Ensure cables are firmly attached and protected along the full length, with self-extinguishing insulation as required.

Is this answer helpful?

A

When routing a cable through a hole in the chassis, protect it with a rubber grommet (rubber ring). Also provide appropriate protection for cables running near heat-generating devices.

Is this answer helpful?

A

For equipment marked with the crossed-out wheeled bin symbol, do not dispose with ordinary domestic waste. Recycle it through suitable facilities that can handle electrical and electronic products and components. Contact your local municipal office for the nearest drop-off or recycling instructions.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Clear safety priorities: secure mounting, tool protection, and avoiding risky installation zones.
  • Practical wiring rules: correct AWG sizing, protected cable routing, and grommets for chassis pass-throughs.
  • Specific component care: tweeter installation with the required protective grille.
  • Guidance on safe listening levels and driving safety considerations.
  • Includes responsible disposal information for electrical and electronic equipment.
VS

Disadvantages

  • Installation requires careful planning and strict adherence to multiple mounting and routing constraints.
  • Tweeter and wiring protections must be used exactly as specified, limiting install freedom.
  • Requires using suitable cable and accessories, including correct AWG selection and quality connectors.
M: OA-GPT-54-NAN

Product Specification

Type

Component system

Amplification

passive

Principle

2-way

Tweeter

1.5"/1.5in

Woofer

6.5"/6.5in

Frequency range

40Hz-26kHz

Power

150W RMS, 300W Peak

Impedance

4Ω

Sensitivity

87dB

Consists of

1x Tweeter, 1x Woofer, 1x Crossover

M: GO-GEM-FL-25

Product Description

Audison TH K2 II P Coro - Audison TH K2 II P Coro Manual Guide to Safer, Cleaner Car Audio

If you want more emotional sound from your car, the Audison TH K2 II P Coro speaker system is built for enthusiasts who care about details. Just as important as the hardware is how it is installed and used. The Audison TH K2 II P Coro Manual focuses on practical, safety-first instructions to help you mount the components correctly, route wiring responsibly, and enjoy high-quality listening without unnecessary risk.

A key theme throughout the guide is secure mounting. Every component must be firmly fastened to the vehicle structure, including any custom supports. The goal is simple: nothing should loosen while driving. Proper fixation helps protect passengers and also reduces the chance of damage to other vehicle parts.

The manual also emphasizes installer safety. When using tools, wear protective eyewear to guard against splinters or residue that could become airborne. It further recommends keeping the product in its original packaging until you are ready for final installation, helping you avoid accidental damage during preparation.

For installation location and setup, the guide is clear: do not perform installations inside the engine compartment, and choose a spot that does not interfere with the vehicle’s normal mechanical or electrical operation. Speakers should not be placed where they are exposed to water, excessive humidity, dust, or dirt. For tweeters, use the protective front grille and avoid installing the high-frequency unit without that grille.

Wiring and cable management are treated as critical to both performance and safety. The guide advises keeping cables away from electronic or mechanical devices in the vehicle, avoiding routing near sharp edges or moving parts, and ensuring the cable is firmly attached and protected along its full length. It also instructs installers to use cables with the correct AWG section for the power and to protect cables passing through chassis openings with a rubber grommet. Finally, it recommends using high-quality cables, connectors, and accessories such as those found in the Connection catalogue.

Notes for Enjoyable and Responsible Listening

Beyond installation, the guide reminds you to keep sound at safe levels. Long exposure to excessively high sound pressure can damage hearing. While driving, safety comes first.

It also includes disposal guidance for electrical and electronic equipment, urging proper recycling through suitable facilities rather than ordinary household waste.

Key Takeaways

  • Mount every component securely to the vehicle structure to prevent loosening while driving.
  • Use eye protection and follow careful handling practices during installation.
  • Route and protect wiring properly (AWG match, grommets, avoid sharp edges and moving parts).
  • Keep tweeters protected by installing with the protective front grille.
  • Listen responsibly: avoid prolonged high volume to protect hearing.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly