Audison Prima APBX 10 AS Manual
PDF manual · 52 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Audison Prima APBX 10 AS manual using AI
Get instant AI answers from your Audison Prima APBX 10 AS manual
Ask anything about the Audison Prima APBX 10 AS. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend Prima APBX 10 AS?
Yes NoFrequently Asked Questions
The unit requires a standard 12V DC negative ground electrical system. Ensure your vehicle's alternator and battery can handle the increased power consumption before installation.
Is this answer helpful?
Use a damp cloth with water and mild soap to wipe the surface. Avoid abrasive cleaners, corrosive solvents, or compressed air, as these can damage internal components or push dust inside.
Is this answer helpful?
The amplifier can reach approximately 80 degrees Celsius (176 degrees Fahrenheit). Allow it to cool before touching any metal parts after extended use.
Is this answer helpful?
No, do not perform any installation in the engine compartment due to extreme heat and vibration. Install it in a protected area away from direct engine heat sources.
Is this answer helpful?
Use speaker wires with a maximum gauge of 10 AWG to ensure low resistance and optimal power transfer to the speakers.
Is this answer helpful?
The fuse rating must be at least 30% higher than the built-in fuse value of the amplifier. If powering multiple units, sum their fuse values and add 30%.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Delivers deep and accurate bass response ideal for car audio systems
- Compact design saves valuable trunk space while maintaining performance
- High efficiency allows for clear sound even at elevated volume levels
- Compatible with standard 12V DC negative ground automotive electrical systems
- Robust construction ensures durability and long-term reliability
Disadvantages
- Requires precise installation and wiring knowledge for optimal performance
- Operates at high temperatures up to 80°C requiring proper ventilation
- Maintenance involves specific cleaning methods avoiding harsh solvents
- Must be securely mounted to prevent potential safety hazards while driving
- Signal level requirements vary between RCA and high-level inputs
Product Specification
Type
Subwoofer with enclosure
Amplification
active
Principle
1-way
Woofer
10 in/254mm
Frequency range
100Hz-22kHz
Power
400W RMS, 800W Peak
Dimensions enclosure
18.11x6.22x13.31 in (WxHxD)
Weight
20.72 lbs
Product Description
Audison Prima APBX 10 AS Subwoofer: Elevate Your Car Audio Experience
The Audison Prima APBX 10 AS is a powerful compact subwoofer designed to deliver deep, accurate bass without consuming excessive trunk space. This component is part of the renowned Prima series, known for balancing high-fidelity sound quality with ease of installation for car audio enthusiasts. Whether you are looking to replace factory speakers or build a custom system from scratch, this subwoofer provides the low-end punch necessary to complete your musical experience.
Designed with a focus on performance and reliability, the APBX 10 AS features a robust construction that handles high power levels efficiently. It integrates seamlessly into various vehicle types, offering a solution for those who demand clarity and impact in their audio setup. The unit operates within a standard 12V DC electrical system, making it compatible with most modern vehicles. Its efficient design ensures that even at high volumes, the sound remains clean and distortion-free, preserving the integrity of your music.
Installation requires careful planning to ensure optimal results. Users must secure all components firmly to the vehicle structure to prevent movement during driving, which could cause damage or injury. Proper wiring is critical; using the correct AWG gauge cables and protecting them from sharp edges or heat sources ensures longevity. The amplifier section can reach temperatures around 80°C, so adequate ventilation is essential. Always disconnect the battery before starting work and verify that all connections are secure to avoid short circuits or noise interference.
For those seeking the best performance, following the manual guidelines regarding signal levels and gain settings is vital. Connecting RCA inputs requires signal levels between 0.3V RMS and 5V RMS, while high-level inputs accept signals up to 22V RMS. Proper grounding eliminates unwanted noise, and using high-quality connectors minimizes resistance. By adhering to these safety and installation protocols, owners can enjoy years of reliable service and superior sound quality from their Audison Prima APBX 10 AS system.
Search for 67,706 Manuals online
Type-in Brand or Model