Manual.ly Logo

Atika KSC 40-35 Manual

0.0 · 0 Ratings

PDF manual · 140 Pages

English

M: QW-35-FL
page

/ 140

Loading...
77adf4786ef63ff361f78a68e24728675707 page 10
16
Keep the operating instructions in a safe
place for future use.
Pass the operating instruction to all persons
who work with the machine.
You may not start to operate the
machine until you have read these
operating instructions, observed all
the instructions given and installed
the machine as described!
This machine must not be operated /
used by children, persons with restricted
physical, sensory or mental abilities or a
lack of experience and/or know-how or
by persons who are not familiar with the
instructions.
Local regulations may stipulate an age
restriction for the user.
The machine and the charger must not be
operated by children or young people
under 16 years of age.
Keep children away from the charger
since they cannot estimate the hazards of
the charger.
Extent of delivery
After unpacking, check the contents of the box
That it is complete
Check for possible transport damage
Report any damage or missing items to your dealer or the
manufacturer immediately. Complaints made at a later date will
not be acknowledged.
1 chain saw
1 guide bar
1 saw chain
1 guide bar cover
1 operating manual
1 assembly and operating instruction
1 warranty declaration
The following parts are not included in the scope of delivery.
These accessories are available from your dealer or
manufacturer.
Charger ALG 40-1800 (article-no. 365500)
Accu AP 40-2000 (article-no. 365501) or
AP 40-4000 (article-no. 365503)
Contents
Extent of delivery 16
EC Declaration of Conformity 17
Operating times 17
Symbols operating manual 17
Symbols on the chain saw 17
Normal intended use 18
Residual risks 18
Safety instructions 18
Safety instructions for chain saws 18
Causes and operator prevention of kickback 18
More safety warnings 19
Vibrations
19
Description of device / spare parts
20
Assembly 20
Before the first start-up 20
Chain lubrication (Oil-automatic) 20
Start-up 20
Inserting the battery 20
Switching on / off 20
Eco-Mode 21
Checking the chain brake 21
Clamping of saw chain 21
Checking the chain lubrication (oil-automatic) 21
Working instructions 22
Before sawing 22
Notes on tree care and cutting 22
While working 22
Saw backstroke 23
General conduct when sawing 23
Work instructions (saw techniques) 23
Additional advices for sawing trunks 23
Additional advices for sawing timber under tension
/ Release
23
Additional advices for chopping down trees 24
Maintenance and cleaning 24
Maintenance 24
Saw chain and guide bar 24
Sharpening of saw chain 24
Chain wheel 24
Cleaning 25
Cleaning of guide bar 25
Transport 25
Storage 25
Guarantee 25
Possible faults 26
Technical data 27
!
!

Chat with your Atika KSC 40-35 manual using AI

Get instant AI answers from your Atika KSC 40-35 manual

Ask anything about the Atika KSC 40-35. Answers come from this manual, with the pages they are based on.

KSC 40-35 Maintenance Schedule

Before each use
Check the chain brake function

Start the saw and push against the front hand guard. The chain must stop immediately (

Every 10 minutes
Check and adjust saw chain tension

Regularly check tension during sawing. Adjust so the chain can be lifted approx. 3-4 mm in the middle of the guide bar.

After every use
Clean the chain saw

Clean the housing with a soft brush or dry cloth. Ensure ventilation slots are free. Do not use water or solvents.

Show in the manual (page 13)
After every chain change/sharpening
Turn the guide bar

Flip the guide bar to avoid single-side wearing.

Show in the manual (page 13)
Regularly
Inspect chain wheel for wear

Check teeth for wear or damage. Replace immediately via customer service if worn, as it reduces chain life.

Show in the manual (page 13)
Regularly
Clean guide bar oil opening and tensioner

Inspect and clean the oil discharge opening (A) and chain tensioner (6). Remove burrs with a flat file.

Show in the manual (page 13)
When dull
Sharpen the saw chain

Sharpen when only dust is ejected or pressure is needed. Use specified angles: Sharpening 30 deg, Breast 60 deg.

Show in the manual (page 13)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend KSC 40-35?

Yes No

Frequently Asked Questions

A

No, the KSC 40-35 is sold as a solo unit. You must purchase the AP 40-2000 or AP 40-4000 battery and the ALG 40-1800 charger separately to operate the chainsaw.

Is this answer helpful?

A

Absolutely not. This chainsaw is designed exclusively for cutting wood. Using it on masonry, plastic, or metal can damage the chain, cause dangerous kickbacks, and void the warranty.

Is this answer helpful?

A

With the saw off and the brake engaged, pull the chain up from the middle of the guide bar. It should lift about 3 to 4 mm. If it is too loose or tight, adjust the tension ring accordingly.

Is this answer helpful?

A

Eco mode conserves battery power by limiting speed, ideal for light pruning. Normal mode provides full power for heavier cutting but drains the battery faster.

Is this answer helpful?

A

No, operating a chainsaw from a ladder is extremely dangerous due to the risk of losing balance and control. Always stand on solid, level ground.

Is this answer helpful?

A

Sharpen the chain whenever it produces only dust instead of chips or if you have to force the saw through the wood. A dull chain increases the risk of kickback.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Lightweight design at approximately 3.5 kg makes it easy to handle for extended periods.
  • Automatic oil lubrication system reduces maintenance and protects the chain.
  • Eco-mode allows for longer battery runtime during low-intensity tasks.
  • Fast-acting chain brake stops the saw in under 0.1 seconds for enhanced safety.
VS

Disadvantages

  • Battery and charger are not included in the box and must be purchased separately.
  • Not suitable for professional forestry work or large-scale timber operations.
  • Chain requires frequent tensioning checks, especially when new or hot.
  • Limited cutting capacity due to the 14-inch guide bar size.
M: QW-35-FL

Product Specification

Type

Chainsaw

Battery

36V, Li-Ion

Bar Length

13.78in

Chain Speed

42.65ft/s

Chain Pitch

3/8"

Oil Tank Capacity

4.57fl oz

Features

Softgrip, Additional Handle, Brushless Motor, Overload Protection, Tool-Free Chain Tensioning, Automatic Chain Lubrication, Chain Brake, Chain Catcher, Guide Bar Stop

Vibration Level

6.14ft/s²

Sound Power Level

99dB(A)

Weight

7.72lbs

Package Contents

Without Charger and Battery, Includes Saw Bar (Oregon), Bar Cover

M: QW-35-FL

Product Description

The Atika KSC 40-35 Cordless Chainsaw Solo: A Powerful Garden Companion

The Atika KSC 40-35 Cordless Chainsaw solo is designed for homeowners and hobby gardeners who need a reliable tool for cutting wood without the hassle of fuel or cords. This lightweight unit features a 36-volt lithium-ion battery system, offering significant power for pruning branches, cutting firewood, and tackling small trees in your backyard. While the saw itself is included, users must note that the battery and charger are sold separately, allowing you to choose between the 2000 mAh or 4000 mAh options based on your project needs.

Equipped with a 14-inch guide bar and a 91P052X Oregon chain, this chainsaw delivers a maximum cutting length of 356 mm. The automatic oil lubrication system ensures the chain stays protected during operation, extending the life of both the chain and the guide bar. Safety is a top priority, featuring a robust chain brake that stops the blade in less than 0.1 seconds in case of kickback. The device also includes an eco-mode to maximize battery runtime when high power is not required.

Before using the saw, it is crucial to read all safety instructions carefully. The machine is intended strictly for private use in gardens and should never be used for forestry work or cutting non-wood materials like plastic or masonry. Proper personal protective equipment, including eye protection, hearing guards, and cut-resistant gloves, is mandatory. Always ensure the chain is correctly tensioned and sharp before starting any work to prevent accidents and ensure clean cuts.

Important Usage Notes

  • Never operate the saw above shoulder height to maintain control.
  • Always keep both hands on the handles while the chain is moving.
  • Do not use the saw on wet ground or during heavy rain.
  • Ensure the chain brake is engaged whenever the saw is not actively cutting.
  • Store the saw in a dry place away from children when not in use.
M: QW-35-FL

© Copyright 2026 Manual.ly