Manual.ly Logo

Aqua Computer ULTITOP Dual D5 Manual

0.0 · 0 Ratings

PDF manual · 1 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 1

Loading...
7ad87c828e3f98e88288dd107a2a5b787eb5 page 1
ULTITOP DUAL D5
ULTITOP DUAL D5
ULTITOP DUAL D5ULTITOP DUAL D5
ULTITOP DUAL D5
User and installation manual
User and installation manualUser and installation manual
User and installation manual
Description
DescriptionDescription
Description
Exceptionally compact top for two D5 pumps, made from durable acetal. Coolant
flow is directed through both pumps consecutively, thereby doubling pressure and
ensuring redundant operation in case of a pump failure. Main focus during devel-
opment of the ULTITOP DUAL D5 were optimum flow characteristics, reducing
noise and vibration to a bare minimum.
Two fastening rings made from anodized aluminum and two gaskets are supplied
to attach two D5 pumps (not included in delivery) to the ULTITOP DUAL. The
mounting bracket is equipped with silicone decouplers specifically designed for the
ULTITOP, effectively preventing remaining vibrations from being transmitted to the
PC case. Stainless steel plates with M3 threads inserted into the decouplers ensure
convenient installation.
Installation of D5 pump motors
Installation of D5 pump motorsInstallation of D5 pump motors
Installation of D5 pump motors
If you have complete D5 pumps instead of D5 pump motors, you will have to dis-
assemble the pumps first. The only parts needed are the housing with electronic
components and the impeller.
Install each pump motor as follows:
1. Place the gasket into the ULTITOP base part.
2. Place the D5 pump motor on top of the ULTITOP base part.
3. D5 NEXT only: Remove the controller unit from the pump
4. Slide the mounting ring onto the rear side of the pump motor and fasten the
ring by screwing it onto the ULTITOP base part.
5. D5 NEXT only: Re-attach the controller unit to the pump.
Integration into coolant loop
Integration into coolant loopIntegration into coolant loop
Integration into coolant loop
Connect the return line to the connector of the ULTITOP DUAL D5 engraved with
the word “IN” and connect the other line to the remaining connector. Use light
force only when screwing in fittings in order not to damage the threads in the plas-
tic base part!
Replacement part information
Replacement part informationReplacement part information
Replacement part information
Gasket: 94767
© 2020 Aqua Computer GmbH & Co. KG 94927
Gelliehäuser Str. 1, 37130 Gleichen
c
o
m
p
u
t
e
r
a
q
u
a

Chat with your Aqua Computer ULTITOP Dual D5 manual using AI

Get instant AI answers from your Aqua Computer ULTITOP Dual D5 manual

Ask anything about the Aqua Computer ULTITOP Dual D5. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend ULTITOP Dual D5?

Yes No

Frequently Asked Questions

A

Yes, the D5 pumps are not included in the delivery, you must provide them for the top

Is this answer helpful?

A

Coolant flows through both pumps consecutively for higher pressure output

Is this answer helpful?

A

No, silicone decouplers minimize vibration and noise transmission effectively

Is this answer helpful?

A

It is made from durable acetal with aluminum rings included for mounting

Is this answer helpful?

A

The loop continues to operate due to the redundant design of the system

Is this answer helpful?

A

Light force is needed for fittings to protect internal threads from damage

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • Dual pump configuration doubles pressure for difficult loops
  • Silicone decouplers reduce vibration transmission to chassis
  • Durable acetal body resists coolant corrosion effectively
  • Redundant operation ensures loop continues if one pump fails
  • Anodized aluminum rings provide secure mounting and look
VS

Disadvantages

  • Pumps are not included in the delivery package
  • Pump motors require disassembly if using full pump units
  • Plastic base requires careful fitment to avoid stripping threads
  • D5 NEXT models need controller removal during ring installation
  • Specific gasket replacement needed for maintenance over time
M: qwen/qwen3.5-flash-20260224

Product Specification

Type

Pump mount for 2x D5

Material

Stainless Steel, POM (Black)

Flow Rate

N/A

Max Head

N/A

Connections

G1/4"

Power Connection

N/A

Dimensions

2.83 x 3.46 x 2.91 in

Features

incl. Mount

M: qwen/qwen3.5-flash-20260224

Product Description

Performance Capabilities

Water cooling enthusiasts constantly seek ways to improve performance without increasing system noise. The Aqua Computer ULTITOP Dual D5 For two pumps Manual provides a comprehensive guide for those looking to implement a dual pump configuration. This setup is particularly useful for high-demand scenarios where pressure is critical. By stacking the pumps via this top, the flow moves through the first unit and directly into the second. This results in increased pressure head, which helps push coolant through tight radiator fin channels or long tubing runs more effectively. It creates a redundancy system where the loop stays running if one unit fails, ensuring data center level reliability for personal computing and critical workloads continuously.

Build Quality

Durability is a significant factor in premium components, and the ULTITOP meets this requirement. The body is constructed from high-grade acetal that resists coolant corrosion effectively against most chemicals used in loops. The anodized aluminum rings not only secure the pumps but also add an aesthetic touch to the build. Vibration damping is handled through specialized silicone decouplers. These parts are integral for acoustic performance, ensuring that mechanical noise is absorbed before reaching the computer chassis. This attention to detail is what separates standard parts from this premium option in the market today.

Assembly Instructions

Installation procedures are detailed to assist users in avoiding common mistakes. It is important to remember that the D5 pumps are not included in the delivery package. Users must provide their own pumps or motors. The assembly requires precision with the mounting rings and gaskets to ensure a watertight seal. If using the D5 NEXT model, the controller unit must be carefully removed before mounting the ring. Reassembly is straightforward after the unit is secured in the case. Proper torque on the aluminum rings ensures long term structural integrity.

Loop Integration

Proper loop integration ensures longevity for all connected components. Labels on the top indicate the correct flow direction, marked clearly as IN. Forcing fittings can strip the internal threads within the plastic base. Therefore, hand-tightening followed by a very slight turn with pliers using light force is recommended. Maintenance is simplified because replacement gaskets are widely available through the manufacturer. Understanding these steps allows builders to create a silent, powerful, and reliable loop without the risk of leaks or excessive noise. This makes the product a favorite among professionals and hobbyists alike seeking superior cooling efficiency and quiet operation in any build environment.

Notes: Ensure all fittings are hand-tightened first. Part 94927 is the main number.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly