Manual.ly Logo

Aqua Computer cuplex kryos NEXT sTRX4 FC Manual

0.0 · 0 Ratings

PDF manual · 1 Pages

English

M: QW-35-FL
page

/ 1

Loading...
9bba441c1d127d14c6a117feba307a11549e page 1
cuplex kryos sTRX4 FC 07/2020
cuplex kryos sTRX4 FC
cuplex kryos sTRX4 FCcuplex kryos sTRX4 FC
cuplex kryos sTRX4 FC
Operating and assembly manual
Operating and assembly manualOperating and assembly manual
Operating and assembly manual
1. Preparation
1. Preparation1. Preparation
1. Preparation
Back up your data before modifying your hardware! Disconnect your PC from the mains power outlet. To prevent
damaging the sensitive hardware components, make sure to ground your workplace and yourself to prevent elec-
trostatic discharges.
When upgrading an existing PC setup, remove the installed heat sink from the CPU. Refer to the instruction manual
of the CPU cooler for details. Remove thermal grease residues from the CPU surface using benzine if necessary.
Apply a thin layer of the thermal grease supplied with the cuplex kryos sTRX4 FC using the supplied plastic spatula.
2. Installation
2. Installation2. Installation
2. Installation
Place the cuplex kryos sTRX4 FC on top of the thermal grease covered CPU. Place on spring into each recess and
insert a screw through each spring into the anchor threads of the CPU socket (only one or two revolutions). Alter-
nately fasten each screw a fraction of a revolution until all four screws are fully fastened.
3. Integration into a water cooling system and flow direction
3. Integration into a water cooling system and flow direction3. Integration into a water cooling system and flow direction
3. Integration into a water cooling system and flow direction
Integrate the cuplex kryos sTRX4 FC into a water cooling system of sufficient performance. For best cooling perfor-
mance, the coolant must be supplied through the upper fitting of the cuplex kryos sTRX4 FC. Reversed flow direc-
tion significantly decreases cooling performance.
4. RGBpx illumination (acrylic version only)
4. RGBpx illumination (acrylic version only)4. RGBpx illumination (acrylic version only)
4. RGBpx illumination (acrylic version only)
Optional: Connect the integrated RGBpx illumination module (connector to the left on the long side of the water
block) to a compatible RGBpx output of an Aqua Computer device. A suitable cable is included in delivery. If re-
quired, additional RGBpx components can be connected to the connector on the short side (daisy chain).
Compatible products with RGBpx output:
● D5 NEXT (41118)
● farbwerk 360 (53279)
● farbwerk nano (53280, 53281)
● OCTO (53286)
● QUADRO (53256)
An adapter for common motherboard connectors for addressable LEDs can be bought separately, product code
53285.
5. Initial operation and approved coolants
5. Initial operation and approved coolants5. Initial operation and approved coolants
5. Initial operation and approved coolants
Put the water cooling system into operation, but do not connect any other PC components to the mains supply!
Check the cuplex kryos sTRX4 FC as well as the fittings for leakages and do not put your PC into operation unless
you can definitively eliminate the possibility of coolant leaking from the system! If any component has been in con-
tact with coolant, do not put it into operation before it is completely dry again! For operating the PC, the cuplex
kryos sTRX4 FC must be correctly mounted and be connected to a water cooling system featuring adequate cooling
performance! For corrosion inhibition, “Double Protect Ultra” must be used as coolant!
ATTENTION:
ATTENTION:ATTENTION:
ATTENTION:
Disregarding the instructions may lead to severe damages! Aqua Computer GmbH & Co. KG cannot be held li
Disregarding the instructions may lead to severe damages! Aqua Computer GmbH & Co. KG cannot be held liDisregarding the instructions may lead to severe damages! Aqua Computer GmbH & Co. KG cannot be held li
Disregarding the instructions may lead to severe damages! Aqua Computer GmbH & Co. KG cannot be held li-
--
-
able for damages or injuries resulting from improper installation or use of the product!
able for damages or injuries resulting from improper installation or use of the product!able for damages or injuries resulting from improper installation or use of the product!
able for damages or injuries resulting from improper installation or use of the product!
Thank you for choosing an aqua computer product.
94907
© 2020 Aqua Computer GmbH & Co. KG – Gelliehäuser Str. 1 – D-37130 Gleichen
c
o
m
p
u
t
e
r
a
q
u
a

Chat with your Aqua Computer cuplex kryos NEXT sTRX4 FC manual using AI

Get instant AI answers from your Aqua Computer cuplex kryos NEXT sTRX4 FC manual

Ask anything about the Aqua Computer cuplex kryos NEXT sTRX4 FC. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend cuplex kryos NEXT sTRX4 FC?

Yes No

Frequently Asked Questions

A

You must exclusively use Double Protect Ultra coolant. Using other fluids may cause corrosion and void the warranty.

Is this answer helpful?

A

Water must enter through the upper port and exit through the lower port. Reverse flow reduces cooling efficiency.

Is this answer helpful?

A

No, RGBpx lighting is only available on the Acrylvariante (acrylic version) of the cuplex kryos sTRX4 FC.

Is this answer helpful?

A

Not directly. You need an adapter cable, item number 53285, to connect the RGBpx connector to standard addressable LED headers.

Is this answer helpful?

A

Failure to follow instructions can cause severe damage to your hardware and will void the warranty provided by Aqua Computer GmbH.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Full cover design protects CPU and VRMs effectively
  • Optimized flow direction enhances cooling performance
  • Compatible with Aqua Computer RGBpx ecosystem
  • Durable construction suitable for high-end builds
VS

Disadvantages

  • Requires specific Double Protect Ultra coolant only
  • Acrylic version includes lighting which may limit durability compared to copper
  • Installation requires careful diagonal tightening technique
M: QW-35-FL

Product Specification

Type

CPU

Compatibility

TR4, sTRX4, sWRX8, SP3

Connectors

1/4"

Lighting

LED (RGB)

Dimensions (LxWxH)

4.61x3.03x0.63 in

M: QW-35-FL

Product Description

Elevate Your sTRX4 System with the Aqua Computer Cuplex Kryos NEXT Full Cover

The Aqua Computer cuplex kryos NEXT sTRX4 Full Cover represents the pinnacle of precision engineering for high-performance computing. Designed specifically for the demanding AMD Threadripper sTRX4 platform, this full-cover water block ensures maximum thermal efficiency and aesthetic appeal. By covering not just the CPU die but also the integrated heat spreader and surrounding VRMs, it provides a comprehensive cooling solution that keeps your system running at peak performance under heavy loads.

Installation is straightforward when following the detailed guidelines provided in the manual. The process begins with essential safety precautions, such as disconnecting power and grounding yourself to prevent electrostatic discharge. Once the old cooler is removed and the surface is prepped with fresh thermal paste, the cuplex kryos sits securely on the processor. The mounting mechanism utilizes a diagonal tightening pattern to ensure even pressure distribution across the entire socket, guaranteeing optimal contact without warping the substrate.

For those building custom loop systems, the integration logic is critical. Water should flow into the top port and exit from the bottom to maximize heat exchange efficiency. Reversing this flow can significantly reduce cooling performance. The unit also features optional RGBpx lighting in its acrylic version, allowing users to sync colors with compatible Aqua Computer components like the D5 NEXT pump or farbwerk controllers. This seamless connectivity creates a unified visual theme throughout the build.

Before powering up the system, it is vital to test for leaks while other components remain disconnected. Only after confirming a leak-free operation should the PC be fully energized. Strict adherence to the recommended coolant, Double Protect Ultra, is mandatory to maintain warranty coverage and prevent corrosion. Ignoring these instructions can lead to severe hardware damage and voids the manufacturer's guarantee.

Important Notes

  • Always use Double Protect Ultra coolant exclusively.
  • Ensure water flows from top to bottom for best results.
  • Verify all connections are tight before applying power.
  • Ground yourself before handling sensitive electronics.
M: QW-35-FL

© Copyright 2026 Manual.ly