APC Smart-UPS SRT 192V RM Manual
PDF manual · 6 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your APC Smart-UPS SRT 192V RM manual using AI
Get instant AI answers from your APC Smart-UPS SRT 192V RM manual
Ask anything about the APC Smart-UPS SRT 192V RM. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend Smart-UPS SRT 192V RM?
Yes NoFrequently Asked Questions
They meet DNV-GL Type Approval 2.4 requirements for use on the bridge and in accommodation zones. CE, GSE, CSA, EMC, and IEC 60945 certifications also apply.
Is this answer helpful?
Expected battery life drops by fifty percent for every ten-degree increase in ambient temperature above twenty-five degrees Celsius.
Is this answer helpful?
Yes, using the SRT10BDVK secure bolt-down vibration isolation kit specifically designed for shipboard tower installation requirements.
Is this answer helpful?
Connect to the EPO terminal block using 16-28 AWG wire. You can wire for normally open or normally closed contact logic.
Is this answer helpful?
Units can operate at temperatures up to fifty-five degrees Celsius for up to sixteen hours in a twenty-four-hour period.
Is this answer helpful?
Yes, recommend 13 mm2 wire size with specific circuit breakers. Incorrect sizing can cause equipment malfunction.
Is this answer helpful?
Yes, a factory installed Dry Contact I/O SmartSlot card (AP9613) is included for status information via isolated relays.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- DNV-GL Type Approval ensures suitability for bridge and control room environments.
- External battery pack extends runtime for critical power needs during mains failure.
- Operates at elevated temperatures up to fifty-five degrees Celsius.
- Includes dry contact I/O card for enhanced monitoring via remote relays.
- Compatible with tower installation kits for vibration isolation on deck.
Disadvantages
- Battery life decreases significantly at high ambient temperatures above twenty-five degrees.
- Requires specific circuit breaker sizing to prevent upstream tripping issues.
- EPO wiring requires strict adherence to SELV circuit isolation standards.
- De-rated output power is necessary when operating above forty degrees.
- Professional installation is mandatory for safety due to shock hazards.
Product Specification
Type
Battery Expansion
Dimensions
17.01x5.12x26.89in
Weight
200.62 lbs
Manufacturer Warranty
2 Years
Product Description
Marine Power Essentials
Securing uninterrupted power in maritime environments requires specialized equipment designed for harsh conditions. The APC Smart-UPS SRT 192V RM Battery Pack Marine offers extended runtime capabilities for critical onboard systems. This unit ensures power stability on the bridge, in control rooms, and within accommodation zones.
Compliance and Reliability
Products meet strict DNV-GL Type Approval standards. This allows deployment in sensitive areas where vibration and power fluctuations are common concerns. When paired with the appropriate marine filter and tower kit, the system ensures continuous operation during adverse conditions. The external battery pack integrates to extend backup duration, ensuring vital navigation tools remain powered. The SRT192RMBPM model is designed for compatibility with SRT5K and SRT6K units.
Performance Specifications
Operating temperatures can reach up to fifty-five degrees Celsius for limited periods within a twenty-four hour cycle. Users must understand that runtime capability drops significantly at higher temperatures. Battery life decreases by half for every ten-degree increase above twenty-five degrees Celsius. To maximize longevity, avoid exceeding forty degrees Celsius during operation. This thermal sensitivity is crucial when planning long voyages. The system de-rates output power linearly as temperature rises.
Emergency Power Management
Safety is paramount in marine settings. The unit supports an Emergency Power Off feature that disconnects equipment immediately upon activation. Installation involves connecting the UPS to the EPO switch using specific wire gauges. Proper wiring ensures the UPS turns off safely. The interface supports both normally open and normally closed contacts for different control panel designs. Consult the APC Smart-UPS SRT 192V RM Battery Pack Marine Manual to understand the dry contact interface configuration options for your specific vessel layout. All connections must adhere to SELV circuit requirements.
Installation Notes and Features
Rack-mount configurations are standard, but tower setups are supported using secure bolt-down kits. These kits isolate vibration to protect internal components. The unit comes equipped with a factory installed Dry Contact I/O SmartSlot card for enhanced monitoring capabilities. This card presents status information through isolated output relays. Always verify circuit breaker guidelines before connecting power sources. Incorrect sizing can lead to malfunctions during overload events. Professional electricians must handle wiring tasks to maintain safety.
Search for 67,706 Manuals online
Type-in Brand or Model