Manual.ly Logo

APC Smart-UPS On-Line SRT Li-Ion 1000VA RM 3U Manual

0.0 · 0 Ratings

PDF manual · 12 Pages

English

M: OA-GPT-54-NAN
page

/ 12

Loading...
ef6b5a28b400364a44f382693ac97129cb39 page 1
Installation Guide Smart-UPS
™
On-Line
SRT1000/1500 UXI-NCLI,
SRT1000/1500 UXI-LI, Tower/Rack-Mount
Important Safety Messages
Read the instructions carefully to become familiar with the equipment before attempting to install, operate,
service or maintain the UPS. The following special messages may appear throughout this manual or on the
equipment to warn of potential hazards or to call attention to information that clarifies or simplifies a
procedure.
The addition of this symbol to a Danger or Warning product safety label indicates that an electrical
hazard exists which will result in personal injury if the instructions are not followed.
The addition of this symbol to a Warning or Caution product safety label indicates that a hazard
exists that can result in injury and product damage if the instructions are not followed.
Product Handling Guidelines
Safety and General Information
• Adhere to all national and local electrical codes.
• All wiring must be performed by a qualified electrician.
• Changes and modifications to this unit not expressly approved by APC could void the warranty.
• This UPS is intended for indoor use only.
DANGER
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious
injury.
WARNING
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious
injury.
CAUTION
CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate
injury.
NOTICE
NOTICE is used to address practices not related to physical injury.
<18 kg
<40 lb
18-32 kg
40-70 lb
32-55 kg
70-120 lb
>55 kg
>120 lb

Chat with your APC Smart-UPS On-Line SRT Li-Ion 1000VA RM 3U manual using AI

Get instant AI answers from your APC Smart-UPS On-Line SRT Li-Ion 1000VA RM 3U manual

Ask anything about the APC Smart-UPS On-Line SRT Li-Ion 1000VA RM 3U. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Smart-UPS On-Line SRT Li-Ion 1000VA RM 3U?

Yes No

Frequently Asked Questions

A

It uses online double-conversion technology, which continuously conditions incoming power before sending it to connected equipment. This helps reduce the impact of outages, voltage shifts, and other power disturbances.

Is this answer helpful?

A

Yes. It is designed for rack-mount use and can also be configured in tower form. The manual highlights proper rack placement, secure mounting, and keeping heavier components in the correct position.

Is this answer helpful?

A

No, this version is sold without a battery. That makes it better for buyers who already have a compatible battery plan or want to source the battery hardware separately.

Is this answer helpful?

A

The unit supports SmartConnect, USB, and serial communication. Depending on the model configuration, it may also include network management capabilities for remote oversight and alerts.

Is this answer helpful?

A

The UPS can recognize up to five battery packs, depending on the setup. Adding battery packs increases runtime, but it also increases recharge time after a discharge event.

Is this answer helpful?

A

The manual stresses safe lifting, proper ventilation, correct grounding, and secure rack mounting. It also advises keeping equipment in the right rack order and following electrical codes.

Is this answer helpful?

A

It is best for servers, networking devices, and other sensitive electronics that need clean, reliable power and orderly shutdown support during outages or power fluctuations.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Online double-conversion design helps deliver stable, conditioned power to connected equipment.
  • Rack/tower flexibility makes the unit adaptable to different installation environments.
  • LCD display provides quick status checks for load, runtime, voltage, and operating mode.
  • SmartConnect, USB, and serial options support local and remote monitoring workflows.
VS

Disadvantages

  • Sold without a battery, so a compatible battery strategy must be planned separately.
  • Installation requires careful handling, grounding, and attention to rack placement.
  • Not intended for outdoor use or harsh environments with dust, moisture, or direct sunlight.
  • Battery and replacement parts must match the supported APC ecosystem, limiting flexibility.
M: OA-GPT-54-NAN

Product Specification

Type

Rackmount

Classification

VFI (On-Line)

Apparent power

1,000VA

Active power

900W

Voltage

230V

Input

1x C14

Outputs

8x C13

Interfaces

USB, LAN (SmartConnect), serial (RJ-45)

Data line protection

RJ-45 (SmartConnect)

Autonomy time

60min (50%), 32min (100%)

Charging time

6h

Weight

56.66lb

Dimensions (WxHxD)

17.01x5.04x23.23in

Rack Units

3U

Special features

LCD

Manufacturer's warranty

five years

Note

no battery included!

M: OA-GPT-54-NAN

Product Description

APC Smart-UPS On-Line SRT Li-Ion 1000VA RM 3U LCD SmartConnect, USB/serial, without battery

When dependable power protection matters, the APC Smart-UPS On-Line SRT Li-Ion 1000VA RM 3U LCD SmartConnect stands out as a compact yet serious solution for servers, networking gear, and sensitive electronics. Built for rack-mount environments, this 3U unit brings together online double-conversion performance, clear LCD status visibility, and flexible connectivity options in a form that fits well in modern IT closets and small data rooms.

One of the most appealing aspects of this model is its practical design. It supports rack or tower-style deployment, making it easier to adapt to changing layouts. The front LCD interface helps users quickly check load, runtime, voltage, and operating mode, while SmartConnect, USB, and serial connectivity provide convenient monitoring and management options. For administrators who want straightforward power oversight, the mix of local display and remote communication is especially useful.

Because this version is sold without a battery, it is well suited for environments that already have a compatible battery plan or prefer to source battery hardware separately. That can be valuable for maintenance strategies, upgrades, or inventory control. The platform is also designed with lithium-ion battery support in mind, which helps simplify long-term service planning and can reduce the need for frequent battery replacement compared with older chemistries.

The manual emphasizes safe installation and proper handling, and that is no surprise given the unit’s role in protecting critical equipment. It includes guidance on ventilation, grounding, power connections, and rack placement, all of which matter when uptime is part of the job. Features like controllable outlet groups and emergency power off support make it easier to manage connected loads with precision during normal use and unexpected events.

Overall, this UPS is aimed at users who need more than basic backup power. It is built to condition utility power, support clean shutdowns, and help keep essential systems running through short outages and power disturbances. For anyone looking at the APC Smart-UPS On-Line SRT Li-Ion 1000VA RM 3U LCD SmartConnect, USB/serial, without battery Manual, the message is clear: this is a capable, flexible, and professional-grade power protection platform.

Notes:

  • Best suited for rack-based IT and networking setups
  • Requires careful installation and proper grounding
  • Battery configuration should match the supported APC ecosystem
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly