APC Smart-UPS 2200VA LCD Manual
PDF manual · 30 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your APC Smart-UPS 2200VA LCD manual using AI
Get instant AI answers from your APC Smart-UPS 2200VA LCD manual
Ask anything about the APC Smart-UPS 2200VA LCD. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend Smart-UPS 2200VA LCD?
Yes NoFrequently Asked Questions
It is well suited for servers, switches, storage systems, and other critical IT gear that needs backup power, clean shutdowns, and stable operation during power issues.
Is this answer helpful?
SmartConnect provides remote visibility and status monitoring through an internet-connected device, making it easier to oversee the UPS and manage it from anywhere.
Is this answer helpful?
Yes. The LCD interface, USB port, and serial port support local monitoring, setup, and software-based shutdown integration through tools like PowerChute.
Is this answer helpful?
Yes. It is a 2U rackmount unit made to fit standard server racks and to support organized IT installations with limited space.
Is this answer helpful?
Keep the UPS in a cool indoor location, allow it to recharge properly, run self-tests when needed, and replace the battery when alerts appear or runtime drops noticeably.
Is this answer helpful?
Basic setup is straightforward, but electrical wiring, EPO connections, and other advanced installation tasks should be handled by a qualified electrician.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- SmartConnect enables remote monitoring and status checks from an internet-connected device.
- 2U rackmount design saves space and fits naturally into server-room installations.
- LCD, USB, and serial connections provide both local control and flexible integration.
- Configurable alarms, transfer settings, and outlet groups help tailor protection to the load.
Disadvantages
- The unit is heavy, so installation may require careful lifting or two people.
- It is intended for indoor use only and should stay away from dust, moisture, and heat.
- Battery runtime declines with age, temperature, and repeated discharge cycles.
- Some installation and wiring tasks require a qualified electrician for safe setup.
Product Specification
Type
Rackmount
Classification
VI (Line-Interactive)
Apparent Power
2,200VA
Active Power
1,980W
Voltage
230V
Input
1x C20
Outputs
8x C13, 1x C19
Interfaces
USB, LAN (SmartConnect), serial (RJ-45)
Data Line Protection
N/A
Runtime
16.3min (50%), 5.4min (100%)
Charge Time
3h
Weight
93.25lb
Dimensions (WxHxD)
18.90x3.39x26.89in
Rack Units
2U
Features
LCD
Manufacturer Warranty
three years
Product Description
APC Smart-UPS 2200VA LCD with SmartConnect, Rackmount, USB/serial
The APC Smart-UPS 2200VA LCD with SmartConnect is built for environments where uptime matters. As a 2U rackmount UPS, it fits neatly into server cabinets while delivering dependable battery backup and power conditioning for critical IT equipment. It is a strong choice for protecting servers, storage, network switches, and communications hardware that cannot afford sudden shutdowns or unstable power.
One of its most useful qualities is the balance between local control and remote visibility. The front LCD gives at-a-glance access to status, battery condition, load information, runtime estimates, and configuration menus. SmartConnect adds remote monitoring through an internet-connected device, which is especially helpful for small server rooms, branch offices, or distributed sites that need simple oversight without constant on-site checks.
The UPS also offers flexible connectivity. USB and serial ports make it easy to integrate with shutdown software and management tools, while PowerChute support helps connected systems close safely during longer outages. Advanced settings allow adjustments for sensitivity, alarm behavior, transfer thresholds, and outlet-group control, making the unit adaptable to different power conditions and equipment needs. For administrators managing multiple devices, the ability to sequence shutdowns and restarts can reduce risk and improve control.
In daily use, the Smart-UPS line is designed to be practical as well as protective. It supports self-tests, battery-replacement alerts, and configurable operating modes that help maintain reliability over time. The sealed lead-acid battery design is made for predictable performance, but like any UPS battery, its lifespan depends on temperature, load, and usage patterns. Keeping the unit in a cool, indoor, well-ventilated rack will help preserve both battery health and overall performance.
For teams building a dependable power strategy, this UPS offers a thoughtful mix of rack-friendly design, smart monitoring, and safety-focused operation. It is more than backup power alone; it is a tool for making power management clearer, safer, and easier to act on when conditions change.
Because the unit supports a broad range of settings, it can adapt to different network rooms and server deployments without feeling overly complex. That flexibility makes it a solid fit for administrators who want dependable protection plus meaningful status data.
Notes
- Best suited for indoor IT environments with proper airflow.
- Battery life is affected by heat, frequent discharge, and age.
- Qualified installation is recommended for wired or advanced setups.
Search for 67,706 Manuals online
Type-in Brand or Model