Manual.ly Logo

APC Easy UPS SRV Manual

0.0 · 0 Ratings

PDF manual · 20 Pages

English

M: gpt-5.6-terra
page

/ 20

Loading...
76047a3c29a1f331de4bd36c0c6220421087 page 1
Important Safety Information
Read the instructions carefully and look at the equipment to become familiar
with the device before trying to
install, operate, service or maintain it. The
following special messages may appear throughout this document or on
the
equipment to warn of potential hazards or to call attention to information that
clarifies or simplifies a procedure.
The addition of this symbol to either a “Danger” or “Warning” safety label indicates
that an electrical hazard exists which will
result in personal injury if the instructions
are not followed.
This is the safety alert symbol. It is used to alert you to potential
personal injury
hazards. Obey all safety messages that follow
this symbol to avoid possible injury or
death.
DANGER
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
WARNING
indicates
a
hazardous
situation
which,
if
not
avoided,
could result
in
death
or
serious
injury.
CAUTION
CAUTION
indicates
a
hazardous
situation
which,
if
not
avoided,
could result
in
minor
or
moderate
injury.
NOTICE
NOTICE
is
used
to
address
practices
not
related
to
physical
injury.
Product Handling Guidelines
User
Manual
Easy UPS
On-Line
SRV Series
Rack Extended Runtime 1000VA, 2000VA, 3000VA
For Professional Business Applications – Not For Consumer Use

Chat with your APC Easy UPS SRV manual using AI

Get instant AI answers from your APC Easy UPS SRV manual

Ask anything about the APC Easy UPS SRV. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Easy UPS SRV?

Yes No

Frequently Asked Questions

A

It is intended for professional business equipment such as servers, network switches, storage systems, and other rack-mounted electronics that need stable power and battery backup.

Is this answer helpful?

A

The series includes 1000VA/800W, 2000VA/1600W, and 3000VA/2400W models. Choose a model based on the actual wattage and VA requirements of the connected equipment.

Is this answer helpful?

A

Yes. When utility power is unavailable or outside acceptable limits, the UPS supplies battery power to connected equipment until utility power returns or the battery reaches its discharge limit.

Is this answer helpful?

A

Yes. USB and RS-232 ports are included, along with an intelligent card slot. SchneiderUPS software supports monitoring, control, reporting, and unattended operating system shutdown.

Is this answer helpful?

A

The display can show input and output voltage, frequency, battery voltage and charge, load percentage, load in kVA, ambient temperature, remaining runtime, alarms, and event history.

Is this answer helpful?

A

Install it in a sturdy 19-inch rack with an appropriate shelf or optional rail kit. Secure the mounting brackets properly, place the UPS at the bottom of the rack, and install the external battery pack below it.

Is this answer helpful?

M: gpt-5.6-terra

Advantages and Disadvantages

Advantages

  • Online double-conversion protection helps shield critical equipment from outages, voltage changes, surges, and other utility disturbances.
  • Three capacity options cover 800W, 1600W, and 2400W load requirements for rack-based business equipment.
  • LCD display shows live power, battery, load, temperature, runtime, alarm, and event information.
  • USB, RS-232, intelligent card slot, and management software support monitoring and controlled system shutdown.
  • External battery configuration enables extended runtime planning for essential loads.
VS

Disadvantages

  • Designed for indoor professional use and not intended for consumer applications.
  • External battery packs are required, adding rack space, installation steps, and system cost.
  • Maximum rated-load efficiency is 88%, which may be lower than some high-efficiency alternatives.
  • Green mode can allow a brief interruption of up to 10 milliseconds during transfer.
  • Battery life can decline faster in hot environments, with poor utility power, or after frequent discharges.
M: gpt-5.6-terra

Product Specification

Type

Rackmount

Classification

VFI (On-Line)

Voltage

230 V

Data Line Protection

N/A

Manufacturer Warranty

two years

M: gpt-5.6-terra

Product Description

APC Easy-UPS SRV Rackmount UPS - Read, Download & Print Free

The APC Easy-UPS SRV Rackmount UPS is designed to keep essential business technology operating through power interruptions, voltage instability, and electrical disturbances. Built for professional rack environments, this online UPS series delivers dependable protection for servers, networking hardware, storage systems, and other critical electronics that need steady, clean power.

Available in 1000VA, 2000VA, and 3000VA capacities, the SRV Rackmount range provides up to 800W, 1600W, or 2400W of output power. Its double-conversion design continuously conditions incoming power, helping protect connected equipment from blackouts, brownouts, surges, sags, and frequency variations. When utility power fails, the UPS switches to battery operation to support connected loads until normal power returns or battery capacity is depleted.

Rack-ready protection for business systems

The compact 2U rackmount form factor fits standard 19-inch enclosures and is intended for indoor professional installations. External battery packs provide extended runtime flexibility, while the supplied battery cable supports a straightforward connection between the UPS and its battery source. For safe rack deployment, install the UPS near the bottom of the enclosure and position the external battery pack below it.

A clear LCD interface gives operators direct access to essential status information, including input and output voltage, frequency, battery charge, load level, temperature, and estimated runtime. Status and alarm LEDs provide visible alerts, while configurable settings allow users to choose output voltage, low-battery warning timing, audible alarm behavior, and restart battery capacity.

Connectivity and operational control

The APC Easy-UPS SRV Rackmount UPS includes USB and RS-232 connectivity for monitoring and management. It also features an intelligent card slot for expanded communication options. SchneiderUPS management software can support UPS monitoring, power control, energy reporting, and unattended operating system shutdown for compatible systems.

The unit provides pure sinewave output with static voltage regulation of plus or minus 1 percent. It supports a nominal 230 Vac output, with selectable 220 Vac and 240 Vac settings. Green mode can improve efficiency when incoming power remains within configured limits, although online operation remains the preferred choice where maximum conditioning is required.

Notes

  • Use the UPS indoors with adequate ventilation and at least 20 cm of clearance on all sides.
  • Battery performance is affected by heat, utility quality, and frequent discharge cycles.
  • Electrical installation and servicing should be handled by qualified personnel.
  • The product carries a two-year limited factory warranty for eligible original purchasers.
M: gpt-5.6-terra

© Copyright 2026 Manual.ly