Manual.ly Logo

Alphacool Eiskoffer Basic Manual

0.0 · 0 Ratings

PDF manual · 40 Pages

English

M: OA-GPT-5-NAN
page

/ 40

Loading...
2b59df6ff707153d3938580872585689420a page f
15
Table of Contents - Inhaltsverzeichnis - Sommaire
Deutsch
English
Français
27
Scope of Delivery 16
Parts List – descriptions and purpose
Deburring Tool & Bending Inserts 17
Fitting Stopper 18
Straight Mandrel with Stylus Stopper 20
Arc Mandrel 22
Multi Mandrel 24
3

Chat with your Alphacool Eiskoffer Basic manual using AI

Get instant AI answers from your Alphacool Eiskoffer Basic manual

Ask anything about the Alphacool Eiskoffer Basic. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Eiskoffer Basic?

Yes No

Video Manual

Alphacool Eiskoffer Basic bending tool for hardtubes - What's inside and how to use

Frequently Asked Questions

A

The Basic kit includes a deburring tool (Basic only), two rubber bending inserts (9.5 mm and 12.5 mm), two fitting stoppers, multiple straight and arc mandrels (small and large radii), a multi-angle mandrel, 10 M4.5x50 wood screws and 10 M5 washers for mounting.

Is this answer helpful?

A

The kit is designed for hard tubes with outer diameters corresponding to Alphacool standards: nominal inner diameters represented are 10 mm and 13 mm for the inserts (9.5 mm and 12.5 mm), and mandrels accommodate tube sizes listed as 12/13 mm and 16 mm.

Is this answer helpful?

A

Insert the appropriate rubber bending insert into the tube before heating to provide even internal support. Lightly moisten the insert (distilled water recommended) to monitor temperature and to ease removal after cooling. Use the correct mandrel radius and avoid bending beyond 180° to prevent deformation and allow extraction.

Is this answer helpful?

A

Yes, but take care: the fitting stopper’s fixed depths are matched to Alphacool connectors. For other fittings, use the straight mandrel with stylus stopper to set your own insertion depth or calculate the difference and adjust measurements accordingly.

Is this answer helpful?

A

Secure mandrels and stoppers to a wooden mounting plate (not included) using the provided wood screws (M4.5x50) and washers. Fasten each piece with two screws for stability and align guides downward as specified to ensure consistent bending.

Is this answer helpful?

A

Arc mandrels come in small and large radii (small ~22–23.5 mm, large ~32–33.5 mm depending on tube OD). The multi-mandrel offers preset angles of 30°, 45°, 60°, and 90°. Do not exceed a total bend of 180° to allow tube removal after cooling.

Is this answer helpful?

A

Moistening the insert helps you observe the tube’s temperature rise more clearly, enabling better timing of the bend. It also reduces adhesion and makes the rubber insert easier to extract after the tube cools, preventing damage when removing the insert.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Complete kit for hard-tube bending: includes deburring tool, inserts, stoppers, and mandrels.
  • Bending inserts prevent kinks and create even internal pressure for smooth bends.
  • Mandrels and stoppers sized for common 12/13 mm and 16 mm tubes with clear radius options.
  • Fitting stopper matches Alphacool connector insertion depths to simplify measurements.
  • Multi-angle mandrel offers quick preset angles (30°, 45°, 60°, 90°) for consistent results.
VS

Disadvantages

  • Designed around Alphacool connector depths—may need adjustments for other brands.
  • Requires mounting to a wooden plate (not included) and basic hardware for stability.
  • Limited to tube diameters 12/13 mm and 16 mm; not suitable for other sizes without adapters.
  • Bending angle limited to 180° total to allow tube removal after cooling.
  • Basic version lacks extra accessories found in higher-tier kits (e.g., more insert sizes).
M: OA-GPT-5-NAN

Product Specification

Type

Pipe bending accessories

M: OA-GPT-54-NAN

Product Description

Alphacool Eiskoffer Basic Manual

The Alphacool Eiskoffer Basic is a compact bending kit designed for precise, repeatable bends in hard tubing used in custom water-cooling loops. Aimed at enthusiasts and modders, this kit supplies the essential tools to deburr, support, and shape rigid tubes safely and accurately. The Basic variant includes a deburring tool, multiple bending inserts, fitting stoppers, straight and arc mandrels, and a multi-angle mandrel, plus screws and washers for mounting the fixtures to a wooden board.

Using the Eiskoffer Basic starts with preparing the tube: trim and round the edge with the included deburring tool to protect fittings and seals. Insert a rubber bending insert (available in two sizes: 9.5 mm for 10 mm ID tubes and 12.5 mm for 13 mm ID tubes) before heating; moistening the insert with distilled water helps track temperature and eases removal after cooling. The inserts provide even internal pressure, preventing kinks and ensuring smooth, consistent curves.

The kit’s stoppers and mandrels are built around common Alphacool HardTube connector depths. The fitting stopper offers fixed insertion depths (6 mm for 12/13 mm tubes and 11 mm for 16 mm tubes) so measured lengths match connectors without additional calculations. For non-Alphacool connectors or variable depths, the straight mandrel with a stylus stopper lets you set and control insertion depth to suit your fittings.

For shaping, the Eiskoffer Basic provides arc mandrels in small and large radii (small: ~22–23.5 mm, large: ~32–33.5 mm depending on tube OD) and a multi-mandrel offering preset angles (30°, 45°, 60°, 90°). These guides accommodate tube ODs of 12/13 mm and 16 mm and are mounted to a wooden plate using the supplied screws and washers for stable operation. Note: avoid bending beyond a total of 180° so the cooled tube can be removed from the mandrel.

Overall, the Alphacool Eiskoffer Basic Manual describes a straightforward workflow—deburr, insert, heat, and bend using the appropriate mandrel and stopper—making it easier for builders to achieve clean, repeatable hard-tube runs with reduced risk of kinks or damaged fittings. The kit is optimized for Alphacool connectors but includes versatile components for other setups when used with minor adjustments.

Notes

  • Kit contents: screws, washers, deburring tool (Basic only), two bending insert sizes, multiple stoppers and mandrels.
  • Inserts: wet before heating to monitor temperature and simplify removal.
  • Do not bend beyond 180° total angle to allow removal after cooling.
  • Mount mandrels on a wooden plate with two screws and washers for stability.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly