Manual.ly Logo

Alphacool Eisblock XPX Pro 1U Mount Manual

0.0 · 0 Ratings

PDF manual · 30 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 30

Loading...
438114bede793ea369d04c25620ec3cbdd28 page c
Eisblock XPX Pro 1U Alphacool International GmbH
12
ENGLISH
SAFETY INSTRUCTIONS
READ THE SAFETY INSTRUCTIONS BEFORE STARTING THE INSTALLATION.
• Not suitable for children under 6 years. (contains small parts which could be swallowed).
• Do not run any cooling components without ensuring that cooling liquid is flowing through the cooling system. Coolers operated without coolant can become
very hot. Caution: Burn Hazard!
• Coolers that have no coolant flowing through them can destroy the computer hardware. When switching on the hardware, always make sure that the pump
is working.
• Please note when tightening the connectors or fittings, no tools such as screwdrivers, pliers, or wrenches should be used. All plastic products or metal
threaded connections, which are linked with plastic parts, are easily over-loaded with tools. Cracking or other damages incurred in this way, as well as damage
from leaking coolant, are not covered under the warranty!
• Use only connectors with a sealing o-ring. When using a sealing ring a firm tightening with the hand is enough. Your instruction manual will clearly refer to
the use of tools in exceptional cases.
• If you have not done so yet, please check your hardware and cooling system (tightness, pump function and fans). This will minimize time spent searching for
possible problems. ALPHACOOL INTERNATIONAL GMBH accepts no liability on the warranty of the manufacturer of the electronic components. The assembly
of the cooling system takes place at your own risk.
• The screws should not be tightened too firmly. If you tighten the screws excessively, the knurled nuts can loosen and the cooler´s uniform pressure is no
longer guaranteed.
• Fasten the connections of your choice to the cooler. Do not use tools such as wrenches for fastening the connections. Connectors with 8mm long threads
may stop the flow.
• We recommend a tightness test before assembling/installing the cooler. The water pressure in the water cooling loop can be at a maximum of 0.8 bar. DO
NOT use tools on the connectors.
• Ensure that the cooler is touching all components to be cooled through thermal grease and thermal pads.
• Only use distilled water or ALPHACOOL CAPE KELVIN CATCHER in your cooling circuit. Damage caused by unsuitable coolant is not covered by the warranty!
Specified normal operation
All ALPHACOOL INTERNATIONAL GMBH cooling components are constructed and licensed for ALPHACOOL INTERNATIONAL GMBH computer construction
parts. The warranty expires in case of misuse.
Warranty
1. Data, designs, illustrations, technical data, weight, measurement and specifications, contained in folders, catalogues, circulars, announcements or price lists,
have a purely informative character. We do not undertake warranty for the correctness of these data. As to the kind and the range of delivery, the data
contained in the order and confirmation of order alone are decisive.
2. If there is a lack of warrantor, you are entitled, on the basis of the legal regulations to require subsequent delivery, to withdraw from the contract or reduce
the purchase price. If you are a consumer, the limitation period of warranty claims for the supplied commodity amounts to two years starting from receipt of
goods (§ 13 BGB). If you are an entrepreneur, in accordance with legal conditions the limitation period amounts to only one year (§ 14 BGB).
3. The warranty claim is valid only in combination with the original invoice, the sales slip or an ALPHACOOL confirmation on warranty claim.
4. It is ALPHACOOL INTERNATIONAL GMBHs own discretionary authority to replace or repair the defective product or defective component. The replaced
product or component changes into property of ALPHACOOL INTERNATIONAL GMBH.
5. All warranty claims are accomplished by ALPHACOOL INTERNATIONAL GMBH or its authorized dealers. If the repair is carried out by a non-authorized or
assigned person, ALPHACOOL INTERNATIONAL GMBH does not take over either costs or liability, unless the repair has been previously agreed upon with
ALPHACOOL INTERNATIONAL GMBH.
6. All costs resulting from refitting of the products are not taken over by ALPHACOOL INTERNATIONAL GMBH.
7. ALPHACOOL INTERNATIONAL GMBHs warranty excludes the following points:
7.1. Regular controls maintenance and repair or the replacement of parts subject to regular wear and tear.
7.2. Improper manipulation or defects caused by incorrect installation.
7.3. Damages caused by storm, water, fire, overvoltage, acts of God, war, incorrect connection to the net, insufficient or incorrect ventilation or
other reasons over which ALPHACOOL INTERNATIONAL GMBH has no influence.
7.4. Damages resulting from transportation or improper packaging.
8. Consumer´s rights are valid in the respective country; demands made to the salesman, as explained and laid down in the sales contract, will not be covered
by this warranty. ALPHACOOL INTERNATIONAL GMBH, its Branch Office and Distributors, are not responsible for direct or indirect damage or losses, as far as
the
compelling legal regulations do not oppose it.
9. ALPHACOOL INTERNATIONAL GMBH does not take over the warranty of the manufacturer of the electronic construction units and components. The
assembly of the cooler takes place at your own risk.
Contact an authorized waste management company in your country. A
waste removal with the municipal waste (unsorted garbage) or similar
mechanisms for the collection of local wastes is not permissible!

Chat with your Alphacool Eisblock XPX Pro 1U Mount manual using AI

Get instant AI answers from your Alphacool Eisblock XPX Pro 1U Mount manual

Ask anything about the Alphacool Eisblock XPX Pro 1U Mount. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Eisblock XPX Pro 1U Mount?

Yes No

Frequently Asked Questions

A

This unit supports multiple sockets including Intel LGA 2066, LGA 2011, LGA 3647 Narrow and Square, and AMD TR4 and SP3. Specific brackets are included to accommodate these different processor types.

Is this answer helpful?

A

No, you should not use tools like wrenches for tightening connectors. Use hand tightening only. Using tools can overload plastic parts and cause cracks or leaks which void the warranty.

Is this answer helpful?

A

The water pressure in the cooling loop must not exceed 0.8 bar. Exceeding this limit risks damaging components and causing coolant leaks that may fail the system integrity.

Is this answer helpful?

A

Yes, you must remove all old thermal paste using alcohol and a lint-free cloth. This ensures the new paste spreads evenly and creates a thin layer less than 0.5 mm thick.

Is this answer helpful?

A

You should use distilled water or Alphacool Cape Kelvin Catcher. Using unsuitable liquids can cause corrosion and is not covered under the warranty protection.

Is this answer helpful?

A

For consumers the warranty is two years starting from the receipt of goods. For entrepreneurs the period is one year. Claims require an original invoice or confirmation from the company.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • Supports wide range of Intel and AMD sockets for versatile server builds
  • Includes complete mounting kit with thermal paste and sealing plugs
  • 1U form factor saves valuable rack space compared to larger coolers
  • Pressure springs maintain consistent thermal contact over time
  • Hand tightening connectors prevents damage from over torque
VS

Disadvantages

  • Warranty does not cover damage from improper installation or misuse
  • Strict 0.8 bar pressure limit requires precise pump adjustment
  • Must use only distilled water or specific coolant to avoid damage
  • Hand tightening only limits fastening force compared to tools
  • Transport damage is excluded from coverage terms
M: qwen/qwen3.5-flash-20260224

Product Specification

Type

Mount

Color

black (matte)

M: qwen/qwen3.5-flash-20260224

Product Description

Alphacool Ice Block XPX Pro 1U Mount for LGA 2066/3647 TR4/SP3 Manual Overview

High performance computing requires efficient thermal management, especially in constrained server environments where airflow is restricted. The Alphacool Ice Block XPX Pro 1U Mount for LGA 2066/3647 TR4/SP3 Manual represents a high standard for cooling solutions in small form factor builds. This cooling block is designed to fit within a strict one-unit rack specification, making it ideal for high density setups where space is at a premium and thermal output is high. It ensures that the processor remains within safe temperature limits during intensive tasks.

Compatibility is a major strength of this component which simplifies inventory management for data centers and workstations. It supports a wide range of sockets including Intel LGA 2066, LGA 2011, and LGA 3647 in both narrow and square configurations. For AMD users, the mounting hardware accommodates TR4 and SP3 processors. This versatility ensures that users can integrate this block into various enterprise and workstation builds without needing a specific unit for every socket type. The installation kit includes necessary thermal paste, mounting springs, nuts, and sealing plugs to facilitate a secure connection. Having all these materials in one box streamlines the setup process significantly.

Safety and precision are paramount during installation to prevent catastrophic hardware failure. The instructions emphasize hand tightening only for connectors, warning against using tools like wrenches or pliers which can crack plastic parts or metal threads. Thermal paste application must be even and thin, less than 0.5 mm, to ensure optimal heat transfer. Users must clean the CPU surface thoroughly using alcohol to remove old residue before applying new paste. Additionally, the cooling loop pressure must not exceed 0.8 bar to prevent leaks or component failure. This prevents damage from excessive stress on the system components.

Fluid selection also impacts longevity and system integrity. Distilled water or specific Alphacool fluids are recommended for the cooling circuit. Using unsuitable liquids can cause corrosion and void the warranty. The product warranty covers manufacturing defects for two years for consumers and one year for entrepreneurs. It is crucial to check the pump function before powering on the hardware to avoid running the cooler dry.

The design incorporates a 1U form factor which allows for standard rack mounting without consuming vertical space required by larger coolers. Pressure springs are used to maintain consistent contact pressure over time as materials expand and contract with heat cycles. This prevents thermal throttling during heavy workloads. For server administrators, minimizing the footprint is critical, and this block addresses that need directly. Careful adherence to the product instructions is essential for warranty preservation.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly