Manual.ly Logo

Alphacool Eisblock ES Acetal GPX-N RTX 3080/3090 Turbo Manual

0.0 · 0 Ratings

PDF manual · 3 Pages

English

M: QW-35-FL
page

/ 3

Loading...
e2e5d4c9ce53363c8cf1d8c43902ac7656c3 page 1
PREPARE GRAPHICS CARD GRAFIKKARTE VORBEREITEN PRÉPARER LA CARTE GRAPHIQUE
Put the hardware on an antistatic mat. Begin
dismantling the original cooler. Depending on the
structure of the cooler, remove the screws at the back
of the card and carefully unhook the fan connector
rst. If the original cooler uses thermal glue, extreme
care should be taken as you can easily damage parts.
Pick up all the items carefully. Next, clean the
hardware of thermal paste or pad residues with a
solvent (e.g. isopropanol alcohol).
Legen Sie die Hardware auf eine antistatische
Unterlage. Beginnen Sie mit der Demontage des
Original-Kühlers. Je nach Aufbau des Kühlers sind
zuerst die Schrauben des Lüfters zu entfernen und
die Blenden zu lösen. Bei aufgeklebten Kühlern ist
äußerste Sorgfalt geboten. Es können leicht
Bauteile abgerissen werden. Heben Sie alle
Einzelteile sorgfältig auf. Reinigen Sie anschließend
die Hardware von Resten der Wärmeleitpaste oder
Pads mit einem Lösemittel (z.B. Isopropanol-
Alkohol).
Posez le matériel sur un tapis antistatique.
Commencez par le démontage du refroidisseur
d’origine. Selon la conguration du radiateur les vis du
ventilateur et les caches doivent être enlevés d’abord.
S’il s’agit d’un refroidisseur collé il faut travailler très
doucement. Sinon des composants peuvent
s’arracher. Conservez tous les pièces
soigneusement. Ensuite, nettoyer le matériel de
résidus de la pâte thermique ou de pads avec un
solvant (alcool isopropanol par ex.).
COMPATIBILITY CHECK KOMPATIBILITÄT PRÜFEN VÉRIFICATION DE COMPATIBILITÉ
Before starting the cooler assembly, compare your
card with the pictures in our congurator. To do so,
visit https://www.hwcong.com and search for your
graphics card or cooler model. For a denitive
identication, you can also compare the PCB number.
The cooler was designed for a special PCB layout.
Occasionally, graphics card manufacturers may
revise the design of their card slightly, causing the
cooler not to t on later models. During assembly,
please make sure taller parts have enough space
around them and that the cooler does not damage
your graphics card.
Alphacool International GmbH is not liable for
assembly errors occurring due to negligence, such
as selecting an incompatible cooler.
Bevor Sie mit der Montage des Kühlers beginnen,
vergleichen Sie Ihre Platine mit den Fotos in
unserem Kongurator. Besuchen Sie dafür
https://www.hwcong.com und suchen Sie nach
Ihrem Grakkarten- oder Kühlermodell. Zur
eindeutigen Zuordnung kann dort auch die PCB
Nummer verglichen werden. Der Kühler wurde für
ein spezielles PCB Layout konstruiert. Es kommt
vor, dass Grakkartenhersteller über Revisionen den
Aufbau leicht abändern und der Kühler auf spätere
Modelle nicht mehr passt. Achten Sie auch bei der
Montage darauf, dass hohe Bauteile frei liegen und
der Kühler die Grakkarte nicht beschädigt.
Alphacool International GmbH haftet nicht bei
fahrlässigen Montagefehlern, wie die Wahl eines
inkompatiblen Kühlers.
Avant de commencer l'assemblage du refroidisseur,
comparez votre carte avec les images de notre
congurateur. Pour ce faire, visitez
https://www.hwcong.com et cherchez votre carte
graphique ou votre modèle de refroidisseur. Pour une
identication précise, vous pouvez également
comparer le numéro de la PCB. La refroidisseur a été
conçu pour une disposition spéciale du PCB. Il est
possible que le fabricant change des détails dans la
disposition de ses composants lors d’une révision et
que le bloc de refroidissement ne soit plus
compatible. Veillez lors de l’installation au fait que les
composants hauts ne touchent pas le bloc de
refroidissement et que le bloc n’endommage pas la
carte graphique.
Alphacool International GmbH n’est pas responsable
ni des erreurs d’installation ni du choix d’un
refroidisseur incompatible.
ACCESSORIES ZUBEHÖR ACCESSOIRES
Lisez les instructions de sécurité avant de commencer l‘installation.
FR
!
DE
Lesen Sie die Sicherheitshinweise, bevor Sie mit der Installation beginnen.
!
EN
Read the safety instructions before starting the installation.
!
ALPHACOOL EISBLOCK AURORA ACRYL GPX-N RTX
ES ACETAL 3090/3080 TURBO INCL. BACKPLATE
2x
M3x5 screws
2x
M3
nuts
4x
M2x5 screws
4x
M2
washers
8x
M2x11 screws
1x
Thermal grease
1x
8x77x1mm
2x
15x51x1mm
1x
15x38x1mm
1x
15x15x1mm
1x
8x84x1mm
1x
8x77x3mm
1x
8x84x3mm
2x
30x30x3mm
1 2 3 4 5 6
2x
15x51x3mm
1x
15x38x3mm
1x
15x15x3mm
2x
15x51x2mm
1x
15x38x2mm
1x
15x15x2mm
1x
30x30x2mm
7 8
9 10 11 12 13 14 15

Chat with your Alphacool Eisblock ES Acetal GPX-N RTX 3080/3090 Turbo manual using AI

Get instant AI answers from your Alphacool Eisblock ES Acetal GPX-N RTX 3080/3090 Turbo manual

Ask anything about the Alphacool Eisblock ES Acetal GPX-N RTX 3080/3090 Turbo. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Eisblock ES Acetal GPX-N RTX 3080/3090 Turbo?

Yes No

Frequently Asked Questions

A

No, this block is designed specifically for the NVIDIA Founders Edition or specific Turbo models. You must check your PCB layout against the Alphacool configurator before purchasing.

Is this answer helpful?

A

Yes, the kit includes one tube of high-performance thermal grease along with pre-cut thermal pads for the memory modules.

Is this answer helpful?

A

Yes, but it requires experience with PC building. You must carefully remove the stock cooler, clean the board, and apply materials correctly to avoid damaging components.

Is this answer helpful?

A

The main body of the cooler is constructed from high-grade acetal plastic, which offers a balance of strength and thermal efficiency.

Is this answer helpful?

A

No, the box contains all necessary M2 and M3 screws, nuts, and washers required for mounting the block and the backplate securely.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • High-quality acetal material ensures durability and excellent heat transfer properties
  • Includes a full backplate for comprehensive cooling of memory chips
  • Compatible with standard 24mm tubing for easy integration into loops
  • Precise machining fits specific RTX 3080/3090 Turbo PCB layouts perfectly
VS

Disadvantages

  • Requires complete removal of the stock cooler which may void warranty
  • Strict compatibility requirements mean it may not fit revised PCB versions
  • Installation is complex and requires patience and technical skill
  • Thermal paste application must be precise to avoid short circuits
M: QW-35-FL

Product Specification

Type

GPU

Material

Copper (nickel-plated), POM (black)

Compatibility

ASUS Turbo GeForce RTX 3080, ASUS Turbo GeForce RTX 3080 V2, ASUS Turbo GeForce RTX 3090

Connections

G1/4"

Dimensions (LxWxH)

10.50x3.86x0.58in

Weight

2.62lbs

Features

Voltage converter cooled with GPU, includes backplate

M: QW-35-FL

Product Description

Alphacool Eisblock ES Acetal GPX-N RTX 3080/3090 Turbo Review

The Alphacool Eisblock ES Acetal GPX-N is a premium water cooling solution designed specifically for the NVIDIA GeForce RTX 3080 and 3090 Turbo models. This all-in-one block features a durable acetal construction that provides excellent thermal conductivity while maintaining structural integrity under high pressure. The unit comes complete with a matching backplate, ensuring comprehensive cooling coverage for both the GPU core and the memory modules on the rear of the card.

Installation requires careful preparation to ensure optimal performance and safety. Users must first remove the original air cooler from the graphics card, taking special care if thermal glue was used by the manufacturer. Once the old cooler is removed, the PCB must be thoroughly cleaned of any residual paste using isopropanol alcohol. Before assembly, it is critical to verify compatibility using the Alphacool configurator tool, as slight design revisions in newer graphics cards can affect fitment. The block is engineered for specific PCB layouts, so checking the PCB number is recommended.

The installation process involves applying thermal pads to the memory chips and spreading a thin layer of thermal grease on the GPU die. The block is then secured to the card using precision screws tightened crosswise to prevent warping. Finally, the included backplate is attached to complete the assembly. This solution offers a silent and efficient alternative to stock coolers, allowing enthusiasts to push their hardware further with liquid cooling setups.

Important Notes

  • Always work on an antistatic mat to prevent electrostatic discharge damage.
  • Ensure no components are obstructed by the cooler during installation.
  • Apply thermal paste sparingly to avoid contaminating surrounding capacitors.
  • Do not overtighten screws; hand-tightening crosswise is sufficient.
M: QW-35-FL

© Copyright 2026 Manual.ly