Manual.ly Logo

Alphacool Eisblock ES Acetal GPX-N Quadro RTX A6000 Manual

0.0 · 0 Ratings

PDF manual · 3 Pages

English

M: QW-35-FL
page

/ 3

Loading...
17c6893e3c390c1496d93c84f64074338205 page 1
PREPARE GRAPHICS CARD GRAFIKKARTE VORBEREITEN PRÉPARER LA CARTE GRAPHIQUE
Put the hardware on an antistatic mat. Begin
dismantling the original cooler. Depending on the
structure of the cooler, remove the screws at the back
of the card and carefully unhook the fan connector
rst. If the original cooler uses thermal glue, extreme
care should be taken as you can easily damage parts.
Pick up all the items carefully. Next, clean the
hardware of thermal paste or pad residues with a
solvent (e.g. isopropanol alcohol).
Legen Sie die Hardware auf eine antistatische
Unterlage. Beginnen Sie mit der Demontage des
Original-Kühlers. Je nach Aufbau des Kühlers sind
zuerst die Schrauben des Lüfters zu entfernen und
die Blenden zu lösen. Bei aufgeklebten Kühlern ist
äußerste Sorgfalt geboten. Es können leicht
Bauteile abgerissen werden. Heben Sie alle
Einzelteile sorgfältig auf. Reinigen Sie anschließend
die Hardware von Resten der Wärmeleitpaste oder
Pads mit einem Lösemittel (z.B. Isopropanol-
Alkohol).
Posez le matériel sur un tapis antistatique.
Commencez par le démontage du refroidisseur
d’origine. Selon la conguration du radiateur les vis du
ventilateur et les caches doivent être enlevés d’abord.
S’il s’agit d’un refroidisseur collé il faut travailler très
doucement. Sinon des composants peuvent
s’arracher. Conservez tous les pièces
soigneusement. Ensuite, nettoyer le matériel de
résidus de la pâte thermique ou de pads avec un
solvant (alcool isopropanol par ex.).
COMPATIBILITY CHECK KOMPATIBILITÄT PRÜFEN VÉRIFICATION DE COMPATIBILITÉ
Before starting the cooler assembly, compare your
card with the pictures in our congurator. To do so,
visit https://www.hwcong.com and search for your
graphics card or cooler model. For a denitive
identication, you can also compare the PCB number.
The cooler was designed for a special PCB layout.
Occasionally, graphics card manufacturers may
revise the design of their card slightly, causing the
cooler not to t on later models. During assembly,
please make sure taller parts have enough space
around them and that the cooler does not damage
your graphics card.
Alphacool International GmbH is not liable for
assembly errors occurring due to negligence, such
as selecting an incompatible cooler.
Bevor Sie mit der Montage des Kühlers beginnen,
vergleichen Sie Ihre Platine mit den Fotos in
unserem Kongurator. Besuchen Sie dafür
https://www.hwcong.com und suchen Sie nach
Ihrem Grakkarten- oder Kühlermodell. Zur
eindeutigen Zuordnung kann dort auch die PCB
Nummer verglichen werden. Der Kühler wurde für
ein spezielles PCB Layout konstruiert. Es kommt
vor, dass Grakkartenhersteller über Revisionen den
Aufbau leicht abändern und der Kühler auf spätere
Modelle nicht mehr passt. Achten Sie auch bei der
Montage darauf, dass hohe Bauteile frei liegen und
der Kühler die Grakkarte nicht beschädigt.
Alphacool International GmbH haftet nicht bei
fahrlässigen Montagefehlern, wie die Wahl eines
inkompatiblen Kühlers.
Avant de commencer l'assemblage du refroidisseur,
comparez votre carte avec les images de notre
congurateur. Pour ce faire, visitez
https://www.hwcong.com et cherchez votre carte
graphique ou votre modèle de refroidisseur. Pour une
identication précise, vous pouvez également
comparer le numéro de la PCB. La refroidisseur a été
conçu pour une disposition spéciale du PCB. Il est
possible que le fabricant change des détails dans la
disposition de ses composants lors d’une révision et
que le bloc de refroidissement ne soit plus
compatible. Veillez lors de l’installation au fait que les
composants hauts ne touchent pas le bloc de
refroidissement et que le bloc n’endommage pas la
carte graphique.
Alphacool International GmbH n’est pas responsable
ni des erreurs d’installation ni du choix d’un
refroidisseur incompatible.
ACCESSORIES ZUBEHÖR ACCESSOIRES
Lisez les instructions de sécurité avant de commencer l‘installation.
FR
!
DE
Lesen Sie die Sicherheitshinweise, bevor Sie mit der Installation beginnen.
!
EN
Read the safety instructions before starting the installation.
!
ALPHACOOL EISBLOCK AURORA ACETAL GPX-N
QUADRO RTX A6000 INCL. BACKPLATE
1x
15x15x1mm
1x
15x38x1mm
2x
15x51x1mm
1x
8x8x1mm
3x
8x84x1mm
1x
8x74x1mm
1 2 3 4 5 6
1x
15x38x2mm
2x
15x51x2mm
1x
15x15x2mm
3x
8x84x2mm
1x
8x74x2mm
1x
30x30x2mm
10 11 12
4x
M2x5 screws
4x
M2 washers
6x
M2x11 screws
4x
M3x8 screws
1x
Thermal grease
1x
Cover plate
987

Chat with your Alphacool Eisblock ES Acetal GPX-N Quadro RTX A6000 manual using AI

Get instant AI answers from your Alphacool Eisblock ES Acetal GPX-N Quadro RTX A6000 manual

Ask anything about the Alphacool Eisblock ES Acetal GPX-N Quadro RTX A6000. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Eisblock ES Acetal GPX-N Quadro RTX A6000?

Yes No

Frequently Asked Questions

A

No, it is designed for a specific PCB layout. Manufacturers may change designs, so you must verify compatibility using the Alphacool configurator before buying.

Is this answer helpful?

A

Place the card on an antistatic mat, remove fan screws, and unhook connectors. If thermal glue is used, proceed with extreme care to avoid ripping components.

Is this answer helpful?

A

You will need screwdrivers for M2 and M3 screws, isopropanol for cleaning, thermal paste, and the included thermal pads and screws provided in the box.

Is this answer helpful?

A

Yes, but it requires precision. Follow the manual strictly regarding thermal pad placement and screw tightening to avoid damaging the graphics card.

Is this answer helpful?

A

Yes, the kit includes a small amount of thermal grease for application on the GPU surface during the assembly process.

Is this answer helpful?

A

The backplate adds structural support to the graphics card and completes the aesthetic look while protecting the rear components.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • High-efficiency acetal base plate ensures superior heat dissipation
  • Includes a matching backplate for improved structural integrity
  • Dedicated channel for power cable routing keeps builds tidy
  • Compatible with high-end NVIDIA Quadro RTX A6000 GPUs
  • Black finish provides a professional and sleek aesthetic
VS

Disadvantages

  • Requires careful removal of original cooler which may use thermal glue
  • Strict compatibility requirements necessitate checking PCB revisions
  • Installation is complex and requires patience and precision
  • Thermal paste application must be very thin to avoid contamination
  • Alphacool is not liable for errors caused by negligence or incompatibility
M: QW-35-FL

Product Specification

Type

GPU

Material

Copper (nickel-plated), POM (black)

Compatibility

PNY RTX A6000

Connectors

G1/4"

Dimensions (LxWxH)

9.13x3.83x0.75in

Weight

2.67lbs

Features

Voltage converter cooled with GPU, includes backplate

M: QW-35-FL

Product Description

Alphacool Eisblock ES Acetal GPX-N Quadro RTX A6000 Review

The Alphacool Eisblock ES Acetal GPX-N Quadro RTX A6000 with Backplate in black represents the pinnacle of custom water cooling solutions for professional workstations. Designed specifically for the NVIDIA Quadro RTX A6000, this cooler transforms the thermal performance of one of the most powerful graphics cards available. The unit features a high-quality acetal base plate that ensures efficient heat transfer from the GPU and memory modules to the liquid loop.

Installation requires precision and care. Users must first prepare the card by removing the stock cooler carefully, especially if thermal glue is used, which demands extreme caution to avoid damaging components. After cleaning off old thermal paste with isopropanol, the new system is assembled. The process involves applying a thin layer of thermal paste to the GPU and placing pre-cut thermal pads on the copper block and PCB. The backplate is secured with M2 screws, providing structural rigidity and additional aesthetic appeal.

Compatibility is critical before purchase. The cooler is engineered for a specific PCB layout, and manufacturers occasionally revise designs. It is essential to verify your specific card model against the Alphacool configurator online to ensure a perfect fit. Taller components on the card must have clearance to prevent damage during installation. Once installed, the system allows power cables to run through a dedicated channel, keeping the build clean and organized.

This product is ideal for users seeking silent operation and maximum thermal efficiency for rendering, AI training, or complex simulations. The black finish offers a sleek look that complements modern workstation builds. While the installation process is detailed, following the steps ensures longevity and optimal performance for your hardware investment.

M: QW-35-FL

© Copyright 2026 Manual.ly