Manual.ly Logo

Alphacool Eisblock Aurora Acrylic GPX-N RTX 4090 Aorus Manual

0.0 · 0 Ratings

PDF manual · 4 Pages

English

M: QW-35-FL
page

/ 4

Loading...
1cdeda81ff234736b76ca8cb0192f8430143 page 2
EN
Ceck compatibility and prepare graphics
card
DE
Kompatibilität prüfen und Grafikkarte
vorbereiten
FR
Vérification de compatibilité et préparer
la carte graphique
Ceck compatibility
Before starting the cooler assembly, compare
your card with the pictures in our configurator.
To do so, visit https://www.hwconfig.com and
search for your graphics card or cooler model.
For a definitiv identification, you can also
compare the PCB number. The cooler was
designed for a special PCB layout. Occasionally,
graphics card manufacturers may revise the
design of their card slightly, causing the cooler
not to fit on later models. During assembly,
please make sure taller parts have enough
space around them and that the cooler does not
damage your graphics card.
Kompatibilität prüfen
Bevor Sie mit der Montage des Kühlers
beginnen, vergleichen Sie Ihre Platine mit den
Fotos in unserem Konfigurator. Besuchen Sie
dafür https://www.hwconfig.com und suchen
Sie nach Ihrem Grafikkarten- oder
Kühlermodell. Zur eindeutigen Zuordnung kann
dort auch die PCB Nummer verglichen werden.
Der Kühler wurde für ein spezielles PCB Layout
konstruiert. Es kommt vor, dass
Grafikkartenhersteller über Revisionen den
Aufbau leicht abändern und der Kühler auf
spätere Modelle nicht mehr passt. Achten Sie
auch bei der Montage darauf, dass hohe
Bauteile frei liegen und der Kühler die
Grafikkarte nicht beschädigt.
Vérification de compatibilité
Avant de commencer l'assemblage du
refroidisseur comparez votre carte avec les
images de notre configurateur. Pour ce faire,
visitez https://www.hwconfig.com et
cherchez votre carte graphique ou votre modèle
de refroidisseur. Pour une identification précise,
vous pouvez également comparer le numéro de
la PCB. La refroidisseur a été conçu pour une
disposition spéciale du PCB. Il est possible que
le fabricant change des détails dans la
disposition de ses composants lors d’une
révision et que le bloc de refroidissement ne
soit plus compatible. Veillez lors de l’installation
au fait que les composants hauts ne touchent
pas le bloc de refroidissement et que le bloc
n’endommage pas la carte graphique.
Alphacool International GmbH is not liable for
assembly errors occurring due to negligence,
such as selecting an incompatible cooler.
Alphacool International GmbH haftet nicht bei
fahrlässigen Montagefehlern, wie die Wahl eines
inkompatiblen Kühlers.
Alphacool International GmbH n’est pas
responsable ni des erreurs d’installation ni du
choix d’un refroidisseur incompatible.
Prepare graphics card
Put the hardware on an antistatic mat. Begin
dismantling the original cooler. Depending on
the structure of the cooler, remove the screws
at the back of the card and carefully unhook the
fan connector first. If the original cooler uses
thermal glue, extreme care should be taken as
you can easily damage parts. Pick up all the
items carefully. Next, clean the hardware of
thermal paste or pad residues with a solvent
(e.g. isopropanol alcohol).
Grafikkarte vorbereiten
Legen Sie die Hardware auf eine antistatische
Unterlage. Beginnen Sie mit der Demontage des
Original-Kühlers. Je nach Aufbau des Kühlers
sind zuerst die Schrauben des Lüfters zu
entfernen und die Blenden zu lösen. Bei
aufgeklebten Kühlern ist äußerste Sorgfalt
geboten. Es können leicht Bauteile abgerissen
werden. Heben Sie alle Einzelteile sorgfältig auf.
Reinigen Sie anschließend die Hardware von
Resten der Wärmeleitpaste oder Pads mit einem
Lösemittel (z.B. Isopropanol-Alkohol).
Préparer la carte graphique
Posez le matériel sur un tapis antistatique.
Commencez par le démontage du refroidisseur
d’origine. Selon la configuration du radiateur les
vis du ventilateur et les caches doivent être
enlevés d’abord. S’il s’agit d’un refroidisseur
collé il faut travailler très doucement. Sinon des
composants peuvent s’arracher. Conservez tous
les pièces soigneusement. Ensuite, nettoyer le
matériel de résidus de la pâte thermique ou de
pads avec un solvant (alcool isopropanol par
ex.).
EN
Place thermal pads on cooling block
DE
Wärmeleitpads auf dem Kühlblock
platzieren
FR
Placer les pads thermique sur le bloc
EN
Apply Thermal Grease
DE
Wärmeleitpaste auftragen
FR
Appliquer la pâte thermique

Chat with your Alphacool Eisblock Aurora Acrylic GPX-N RTX 4090 Aorus manual using AI

Get instant AI answers from your Alphacool Eisblock Aurora Acrylic GPX-N RTX 4090 Aorus manual

Ask anything about the Alphacool Eisblock Aurora Acrylic GPX-N RTX 4090 Aorus. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Eisblock Aurora Acrylic GPX-N RTX 4090 Aorus?

Yes No

Frequently Asked Questions

A

You must visit the online configurator website and search for your graphics card model. Compare the PCB number and pictures carefully to ensure the cooler fits your specific revision.

Is this answer helpful?

A

Use an antistatic mat to prevent static discharge. Handle all components carefully, especially when removing glued coolers to avoid tearing parts from the card.

Is this answer helpful?

A

Yes, thermal grease is included along with a putty tool. You must also clean the card of old paste using isopropanol alcohol before application.

Is this answer helpful?

A

No, Alphacool International GmbH is not liable for errors caused by negligence, such as selecting an incompatible cooler or improper installation techniques.

Is this answer helpful?

A

Yes, the package contains a PCI bracket along with screws, plugs, and pads for secure mounting within your computer case environment.

Is this answer helpful?

A

The kit includes various thermal pads designed for specific heat sources. Some areas may require paste for optimal performance depending on the component height.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Comprehensive accessory kit includes various thermal pads, grease, and tools for a complete setup without extra purchases.
  • ARGB lighting support allows for extensive customization to match your PC build aesthetic and RGB themes.
  • Durable acrylic construction provides a premium look while allowing clear visibility of fluid temperature and flow.
  • Detailed compatibility checker online helps ensure correct model selection before purchase to avoid fitment issues.
VS

Disadvantages

  • Installation requires antistatic precautions and careful handling to prevent static damage to sensitive electronics.
  • Thermal glue removal risks damaging components if care is not taken when dismantling the original cooler.
  • PCB revisions by manufacturers might cause compatibility issues with newer models despite compatibility checks.
  • Taller components on the card need sufficient clearance to ensure the block does not crush or damage them.
M: QW-35-FL

Product Specification

Type

GPU

Material

Copper (chrome-plated), PMMA

Connectors

G1/4"

Lighting

LED (RGB)

Features

Voltage Regulator cooled (GPU), incl. Backplate

M: QW-35-FL

Product Description

Alphacool Ice Block Aurora Acrylic GPX-N NVIDIA RTX 4090

Advanced Thermal Management for High Performance

The Alphacool Ice Block Aurora Acrylic GPX-N NVIDIA RTX 4090 stands out as a premier cooling solution for enthusiasts demanding maximum performance and style. This acrylic block is designed specifically for the powerful NVIDIA RTX 4090 graphics card, ensuring that your hardware stays cool even under the heaviest gaming or rendering loads. The premium acrylic material allows for a beautiful clear view of the internal liquid flow while providing robust durability against impacts. Integrating ARGB lighting adds a highly customizable aesthetic to your build, letting you match the cooling system perfectly with your existing PC lighting theme.

Critical Installation Considerations

Proper installation is vital for the longevity of your expensive components. Before assembling the cooler, users must strictly verify compatibility using the online configurator. Graphics card manufacturers sometimes revise PCB layouts slightly, which can lead to fitment issues with later models or specific editions. Always compare the PCB number and product pictures carefully against the provided guides. During the process, an antistatic mat is strongly recommended to prevent any static discharge damage to sensitive electronic parts.

Comprehensive Accessory Kit and Assembly

The package includes a wide variety of thermal pads in specific dimensions to cover all necessary hotspots. Thermal grease and a putty tool are also provided for optimal heat transfer where pads might differ. A mounting bracket, screws, and plugs ensure a secure and stable fit within your computer case. Specific screws like M2x5mm and M2x11mm are included for precise positioning. Cleaning the original thermal paste with isopropanol alcohol is a necessary prerequisite step when switching to this premium liquid cooling block.

Safety and Liability Details

Safety instructions emphasize extreme caution, especially if the original cooler was glued with strong adhesive. Removing glued components requires gentleness to avoid tearing valuable parts from the card PCBs. Tall components within the card must have enough clear space so the cooling block does not crush them during operation. Alphacool International GmbH is not liable for errors caused by negligence or choosing an incompatible cooler. Always prioritize safety to protect your valuable investment. The backplate offers additional structural integrity and heat dissipation support for the rear of the card.

Conclusion on Premium Cooling

This cooling block represents a high-quality choice for RTX 4090 owners looking for efficiency. Following the detailed guide ensures maximum success and system health. The combination of acrylic design, ARGB support, and thorough accessories makes it a top-tier upgrade for any custom water loop build system. Enjoy silent and efficient operation with your new upgraded PC water cooling setup today. Contact support for assembly inquiries using the provided contact methods.

M: QW-35-FL

© Copyright 2026 Manual.ly