Manual.ly Logo

Alphacool Eisblock Aurora Acrylic GPX-N RTX 4070 Ti Reference Manual

0.0 · 0 Ratings

PDF manual · 4 Pages

English

M: QW-35-FL
page

/ 4

Loading...
dae8773b5f0a229f4e90472edd06d6d5b33c page 2
EN
Ceck compatibility and prepare graphics
card
DE
Kompatibilität prüfen und Grafikkarte
vorbereiten
FR
Vérification de compatibilité et préparer
la carte graphique
Ceck compatibility
Before starting the cooler assembly, compare
your card with the pictures in our configurator.
To do so, visit https://www.hwconfig.com and
search for your graphics card or cooler model.
For a definitiv identification, you can also
compare the PCB number. The cooler was
designed for a special PCB layout. Occasionally,
graphics card manufacturers may revise the
design of their card slightly, causing the cooler
not to fit on later models. During assembly,
please make sure taller parts have enough
space around them and that the cooler does not
damage your graphics card.
Kompatibilität prüfen
Bevor Sie mit der Montage des Kühlers
beginnen, vergleichen Sie Ihre Platine mit den
Fotos in unserem Konfigurator. Besuchen Sie
dafür https://www.hwconfig.com und suchen
Sie nach Ihrem Grafikkarten- oder
Kühlermodell. Zur eindeutigen Zuordnung kann
dort auch die PCB Nummer verglichen werden.
Der Kühler wurde für ein spezielles PCB Layout
konstruiert. Es kommt vor, dass
Grafikkartenhersteller über Revisionen den
Aufbau leicht abändern und der Kühler auf
spätere Modelle nicht mehr passt. Achten Sie
auch bei der Montage darauf, dass hohe
Bauteile frei liegen und der Kühler die
Grafikkarte nicht beschädigt.
Vérification de compatibilité
Avant de commencer l'assemblage du
refroidisseur comparez votre carte avec les
images de notre configurateur. Pour ce faire,
visitez https://www.hwconfig.com et
cherchez votre carte graphique ou votre modèle
de refroidisseur. Pour une identification précise,
vous pouvez également comparer le numéro de
la PCB. La refroidisseur a été conçu pour une
disposition spéciale du PCB. Il est possible que
le fabricant change des détails dans la
disposition de ses composants lors d’une
révision et que le bloc de refroidissement ne
soit plus compatible. Veillez lors de l’installation
au fait que les composants hauts ne touchent
pas le bloc de refroidissement et que le bloc
n’endommage pas la carte graphique.
Alphacool International GmbH is not liable for
assembly errors occurring due to negligence,
such as selecting an incompatible cooler.
Alphacool International GmbH haftet nicht bei
fahrlässigen Montagefehlern, wie die Wahl eines
inkompatiblen Kühlers.
Alphacool International GmbH n’est pas
responsable ni des erreurs d’installation ni du
choix d’un refroidisseur incompatible.
Prepare graphics card
Put the hardware on an antistatic mat. Begin
dismantling the original cooler. Depending on
the structure of the cooler, remove the screws
at the back of the card and carefully unhook the
fan connector first. If the original cooler uses
thermal glue, extreme care should be taken as
you can easily damage parts. Pick up all the
items carefully. Next, clean the hardware of
thermal paste or pad residues with a solvent
(e.g. isopropanol alcohol).
Grafikkarte vorbereiten
Legen Sie die Hardware auf eine antistatische
Unterlage. Beginnen Sie mit der Demontage des
Original-Kühlers. Je nach Aufbau des Kühlers
sind zuerst die Schrauben des Lüfters zu
entfernen und die Blenden zu lösen. Bei
aufgeklebten Kühlern ist äußerste Sorgfalt
geboten. Es können leicht Bauteile abgerissen
werden. Heben Sie alle Einzelteile sorgfältig auf.
Reinigen Sie anschließend die Hardware von
Resten der Wärmeleitpaste oder Pads mit einem
Lösemittel (z.B. Isopropanol-Alkohol).
Préparer la carte graphique
Posez le matériel sur un tapis antistatique.
Commencez par le démontage du refroidisseur
d’origine. Selon la configuration du radiateur les
vis du ventilateur et les caches doivent être
enlevés d’abord. S’il s’agit d’un refroidisseur
collé il faut travailler très doucement. Sinon des
composants peuvent s’arracher. Conservez tous
les pièces soigneusement. Ensuite, nettoyer le
matériel de résidus de la pâte thermique ou de
pads avec un solvant (alcool isopropanol par
ex.).
EN
Place thermal pads on cooling block
DE
Wärmeleitpads auf dem Kühlblock
platzieren
FR
Placer les pads thermique sur le bloc
EN
Apply Thermal grease
DE
Wärmeleitpaste auftragen
FR
Appliquer la pâte thermique

Chat with your Alphacool Eisblock Aurora Acrylic GPX-N RTX 4070 Ti Reference manual using AI

Get instant AI answers from your Alphacool Eisblock Aurora Acrylic GPX-N RTX 4070 Ti Reference manual

Ask anything about the Alphacool Eisblock Aurora Acrylic GPX-N RTX 4070 Ti Reference. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Eisblock Aurora Acrylic GPX-N RTX 4070 Ti Reference?

Yes No

Frequently Asked Questions

A

It is designed specifically for reference models with the original PCB layout. Manufacturers sometimes update designs mid-production. You must check the online configurator and compare the PCB number before buying to ensure it fits your specific hardware model.

Is this answer helpful?

A

The kit comes with a putty tool and a plug tool for applying thermal material and securing water line connections. You will also need standard screwdrivers to remove the factory cooler and install the new PCI bracket and backplate onto the graphics card.

Is this answer helpful?

A

Remove the original cooler completely and clean off all old residue. Use the supplied thermally conductive grease for the GPU core. Align the specific thermal pads provided in the package for the memory and power VRMs exactly to their designated spots to ensure proper heat transfer.

Is this answer helpful?

A

Yes, the unit includes an ARGB adapter that connects the lighting strip to standard motherboard headers. Ensure your motherboard supports RGB control software and that you connect it to the correct 12V ARGB port to synchronize the colors with the rest of your build.

Is this answer helpful?

A

The manufacturer is not liable for errors occurring due to negligence or choosing an incompatible cooler. If the PCB layout has changed, the block might not fit or could damage components. It is critical to verify your card version against the provided configurator images before installation.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Clear acrylic design allows for showcasing custom loop aesthetics while maintaining high thermal performance
  • Complete kit includes all necessary thermal pads, grease, and ARGB adapter for full installation
  • Backplate adds structural integrity to prevent PCB bending and enhances overall system durability
VS

Disadvantages

  • Potential compatibility issues may arise if the manufacturer has revised the PCB layout
  • Assembly requires careful removal of stock cooler which risks damage if thermal glue is used
  • Liability for negligence or incompatible selection rest entirely on the installer, not the manufacturer
M: QW-35-FL

Product Specification

Type

GPU

Material

Copper (nickel-plated), PMMA

Compatibility

Nvidia GeForce RTX 4070 Ti Reference Design

Connectors

G1/4"

Lighting

LED (RGB)

Dimensions (LxWxH)

7.17 x 4.76 x 1.69 in

Features

Voltage regulator cooled (GPU), incl. Backplate

M: QW-35-FL

Product Description

Elevate Your GPU Cooling Performance with Aurora Acryl

The Alphacool Eisblock Aurora Acryl GPX-N NVIDIA RTX 4070 Ti Reference mit Backplate stands out as a premium choice for enthusiasts seeking efficient thermal management without the bulk of a massive copper block. This water cooling solution is specifically engineered to replace the stock dual fan cooler on reference graphics cards, offering a sleek aesthetic combined with functional precision. The clear acrylic block allows users to showcase their custom loop setup while ensuring optimal heat dissipation for sustained high-performance gaming or rendering tasks. It integrates seamlessly into advanced liquid cooling architectures found in top-tier PC builds.

Installing this component requires careful preparation to ensure compatibility and safety for your valuable hardware. Before assembly, users must verify their specific graphics card layout using the online configurator available on the manufacturer site. Manufacturers occasionally revise PCB designs during the lifecycle of a product which might affect fitment on newer stock versions, so checking the PCB number is crucial. Once confirmed, the old cooler must be removed gently to avoid damaging components glued or screwed to the board. Cleaning the surface of any remaining thermal paste is essential for maximum efficiency and longevity of the new block.

The complete kit includes various thermal pads of specific dimensions to cover different heatsinks on the PCB including memory modules. Thermal grease is also provided for the GPU core contact area directly under the cold plate. Mounting the unit involves securing the PCI bracket and attaching the metal backplate for structural support against bending. ARGB lighting integration allows for synchronized colors with other system fans if supported by the motherboard headers. Finally, plumbing connections are prepared using the included G1/4 plugs and tools for loop connection without leaks. Specific thermal pads of sizes like 5x8mm and 81x8mm cover all necessary areas. Tools such as a putty tool and plug tool are also part of the package.

Included Components

The package comes with a detailed list of hardware required for completion. You will find multiple thermal pads designed for different heights on the circuit board. Screws and washers are provided to mount the bracket and backplate securely. An ARGB adapter is included to connect the lighting strip to standard motherboard headers. A plug tool and putty tool assist in the finishing steps during assembly.

Important Safety and Liability Note

Always work on an antistatic surface to protect sensitive electronics from static discharge. Improper installation can void warranties or damage hardware permanently. Manufacturers often update designs mid-production run, so always double check model numbers before opening the packaging. Alphacool International GmbH is not liable for assembly errors occurring due to negligence. Ensure taller parts have enough space around them to prevent physical damage during the mounting process.

Final Thoughts

This cooling solution brings reliability and style to high-end builds effectively. With clear acrylic finishes and included accessories for a complete overhaul, it simplifies the loop building process significantly for users seeking better thermals. You can reach out to German support via email for further assistance if technical questions arise during your upgrade journey.

M: QW-35-FL

© Copyright 2026 Manual.ly