Manual.ly Logo

Aerotec Airliner 5 Go Manual

4.3 · 11 Ratings

PDF manual · 24 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 24

Loading...
0b041aede8c3bb010c77f3c320a5c86b8739 page b
G
B
11
1. PRECAUTIONS
All users must read and fully understand all information
contained in this owner’s manual before assembling, operating,
or maintaining this air compressor.
Carefully review the following rules for safe operation and fully
understand all warnings.
An ACOUSTIC PRESSURE value of 4 m. corresponds to the
ACOUSTIC POWER value stated on the yellow label located on
the compressor, minus 20 dB.
THINGS TO DO
● The compressor must be used in a suitable environment (well
ventilated with an ambient temperature of between +5°C and
+40°C) and never in places affected by dust, acids, vapours,
explosive or flammable gases.
● Always maintain a safety distance of at least 4 meters between the
compressor and the work area.
● Any coloring of the belt guards of the compressor during painting
operations indicates that the distance is too short.
● Insertthe plugofthe electriccable inasocket ofsuitableshape,
voltage and frequency complying with current regulations.
● Use extension cables with a maximum length of 5 meters and of
suitable cross-section.
● The use of extension cables of different length and also of adapters
and multiple sockets should be avoided.
● Always use the I/O switch to switch off the compressor.
● Always use the handle to move the compressor (fig. 4).
● Always disconnect power cord and air hose from the air compressor
before transporting.
● When operating, the compressor must be placed on a stable,
horizontal surface.
● The compressor must only and exclusively be operated in a
horizontalposition(fig.1),standingontwostripsofrubberlocated
at the opposite side of the control panel.
THINGS NOT TO DO
● Neverdirectthejetofairtowardspersons,animalsoryourbody.
(Always wear safety goggles to protect your eyes against flying
objectsthatmaybeliftedbythejetofair).
● Neverdirectthe jet of liquids sprayed by tools connected tothe
compressor towards the compressor.
● Never use the appliance with bare feet or wet hands or feet.
● Never pull the power cable to disconnect the plug from the socket
or to move the compressor.
● Never leave the appliance exposed to adverse weather
conditions.
● Never transport the compressor with the receiver under pressure.
● Donotweldormachinethereceiver.Inthecaseoffaultsorrusting,
replace the entire receiver.
● Never allow inexpert persons to use the compressor. Keep children
and animals at a distance from the work area.
● This appliance is not intended for use by persons (including
children)withreducedphysical,sensoryormentalcapabilities,or
lackof experienceandknowledge,unlessthey havebeengiven
supervision or instruction concerning the use of the appliance by a
person responsible for their safety.
● Children should be supervised to ensure that they do not play with
the appliance.
● Donotpositionflammableornylon/fabricobjectsclosedtoand/or
on the compressor.
● Never clean the compressor with flammable liquids or solvents.
Check that you have unplugged the compressor and clean with a
damp cloth only.
● The compressor must be used only for air compression. Do not use
the compressor for any other type of gas.
● The compressed air produced by the compressor cannot not be
used for pharmaceutical, food or medical purposes exceptafter
particular treatments and cannot be used to fill the air bottles of
scuba divers.
● To avoid serious burns, never touch the cylinder head parts or
tubing during or immediately after operation.
THINGS YOU SHOULD KNOW
● To avoid overheating of the electric motor, this compressor is
designed for intermittent operation (do not operate on more than
a 15% duty cycle. If this air compressor pumps air more than 15%
of one hour, then the compressor’scapabilityis less than the air
delivery required by the application. Always match the air volume
requirements of the attachment or accessory with the air volume
deliveryofthecompressor).Inthecaseofoverheating,thethermal
cut-outofthemotortrips,automaticallycuttingoffthepowerwhen
the temperature is too high. The motor restarts automatically when
normal temperature conditions are restored.
● When the compressor is plugged into an electrical source and
the I/O switch is in the “ON” position, this compressor will
cycle automatically.
– Never touch any moving parts.
–Keepallbodyparts,hair,clothing,andjewelryawayfrommoving
parts.
– Never operate the air compressor without all guards and shrouds
in place.
– Never stand on the compressor.
● The compressor is fitted with a safety valve that is tripped in the case
of malfunctioning of the pressure switch in order to assure machine
safety.
● The red notch on the pressure gauge refers to the maximum
operating pressure of the tank. It does not refer to the adjusted
pressure.
● Whenfittingatool,theflowofairinoutputmustbeswitchedoff.
● When using compressed air, you must know and comply with
the safety precautions to be adopted for each type of application
(inflation, pneumatic tools, painting, washing with water-based
detergentsonly,etc.).
● Never exceed the maximum allowable pressure recommended by
the manufacturer of any attachment or accessory you use with this
compressor.
Preserve this handbook for future reference
GB
2. FEATURES (Pics. 1-2-3)
A. I/O Switch: The I/O switch is the activation mechanism that is
usedtostartandstopthecompressor.Whentheswitchis“On”,
the motor and pump will compress air until tank pressure reaches
the upper limit of the factory set operating pressure. When
tankpressurefallsbelowthefactoryset“cutin”pressure,the
compressor will again automatically start to compress air.
B. Tank Pressure Gauge: The tank pressure gauge indicates the air
pressurethatispresentinthetankinPSI(andBAR).
C. Regulated Pressure Gauge: The regulated pressure gauge
indicates the amount of pressure that is allowed into the discharge
line according to the setting of the regulator.
D. Regulator Knob:Theregulatorknobisusedtoadjusttheair
pressure that is available at the discharge line. The discharge
air pressure is increased by turning the knob clockwise and
decreased by turning the knob counter clockwise.
E. Drain Valve: Ball style valve that drains moisture from the tank
when opened.
F. Quick Coupler: The quick coupler is used to connect the airline
to your tool.
G. Safety valve: The safety valve is set to avoid over-pressurization
oftheairtanks.Thisvalveisfactorypre-setat10bar(145PSI)
and will not function unless tank pressure reaches this pressure.
Do not attempt to adjust or eliminate this safety device.
Any adjustments to this valve could cause serious injury. If
thisdevicerequiresserviceormaintenance,seeanAuthorized
ServiceCenter.
H. Handle for lifting/moving.

Chat with your Aerotec Airliner 5 Go manual using AI

Get instant AI answers from your Aerotec Airliner 5 Go manual

Ask anything about the Aerotec Airliner 5 Go. Answers come from this manual, with the pages they are based on.

Airliner 5 Go Maintenance Schedule

Daily
Drain tank condensation water

Open the drain valve daily to remove moisture from the tank. Tilt the compressor to ensure all water is removed.

Every few days
Clean safety devices

Keep safety devices free of dust and dirt by wiping with a clean cloth or blowing with low-pressure air.

Regularly
Clean appliance exterior

Clean regularly with a damp cloth and soft soap. Do not use solvents or wash with water.

Show in the manual (page 11)
Occasionally
Test safety valve

Actuate the safety valve occasionally by pulling the ring until air releases to ensure it functions correctly.

Show in the manual (page 12)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend Airliner 5 Go?

Yes No
0
User Pic

Klaus W

7 months ago

Is the noise level from this compressor manageable in a typical garage?

0
User Pic

Manual.ly

7 months ago

The compressor uses an oil-free motor which is known to be louder than oil-lubricated models. While compact and powerful at 10 bar, users report higher volume during operation. It works well for inflating tires but ear protection may be needed for longer tasks. Overall performance is solid despite the noise.

M: qwen/qwen3.5-flash-20260224
M: qwen/qwen3.5-flash-20260224

Frequently Asked Questions

A

This compressor is designed for intermittent operation with a duty cycle of no more than 15 percent within one hour. Operating it beyond this limit may cause overheating and trigger the thermal protection cutout automatically. Always allow the motor to cool down before restarting if it trips due to high temperature.

Is this answer helpful?

A

No, the warranty is void if used in commercial, trade, or industrial applications. It is designed strictly for personal and DIY tasks. Industrial use may result in damage not covered by warranty. The manufacturer assumes no liability for damages arising from misuse in professional environments.

Is this answer helpful?

A

You must drain the condensation water daily to prevent rust inside the tank. Open the ball valve at the bottom of the pressure vessel to release moisture. Ensure the compressor is switched off before draining. Dispose of the condensate responsibly as it may contain oil residues.

Is this answer helpful?

A

Yes, the Aerotec Airliner 5 GO is an oil-free compressor. This means you will not get oil contamination in your air lines or tools. It is ideal for painting and pneumatic tools where oil mist could cause issues or damage sensitive equipment.

Is this answer helpful?

A

If it stops, check for overheating and let the unit cool down. Ensure all connections are secure and the ventilation is adequate. If the safety valve activates, there may be a pressure switch failure. Contact an authorized service center for repairs do not attempt to fix internal electrical components yourself.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • Oil-free design ensures clean air output without oil contamination for tools.
  • Automatic start and stop function maintains steady pressure in the tank independently.
  • Safety valve prevents over-pressurization to protect the air tank from explosion.
  • Portable design includes a handle and shoulder belt for easy transport to work sites.
VS

Disadvantages

  • Strict duty cycle limit of 15 percent per hour prevents continuous heavy use.
  • Warranty is void if used in commercial, industrial, or professional business settings.
  • Maximum safe operating temperature is 40 degrees Celsius limiting outdoor summer use.
  • Horizontal operation is mandatory during use which limits placement flexibility.
M: qwen/qwen3.5-flash-20260224

Product Specification

Power

1.1kW (230V), 1.48 HP

Intake Capacity

52.83 GPM

Output Capacity

29.06 GPM

Max Pressure

145.04 PSI

Speed

3,400 RPM

Tank Capacity

1.32 Gal

Features

Oil-free pump, Pressure reducer, Pressure regulator, 1 Cylinder, Carry handle, 2 Gauges

Noise Level

97 dB(A)

Dimensions (HxWxD)

7.48x15.75x14.96 inches

Weight

18.74 lbs

M: qwen/qwen3.5-flash-20260224

Product Description

Welcome to the Aerotec Airliner 5 GO Review

The Aerotec Airliner 5 GO Electric Compressor Manual serves as the primary guide for operating this robust machine efficiently. This oil-free portable air compressor is designed for personal and DIY tasks rather than industrial applications. It features a 1.5 HP motor and a 5-liter tank capacity ensuring steady airflow. The device operates on standard 230V electrical supply at 50Hz. Users must ensure the environment is well-ventilated with temperatures between 5 degrees and 40 degrees Celsius. Dust free air intake is crucial for motor protection.

Key Features

Safety is a top priority with this unit. It includes a maximum safety valve set at 10 Bar specifically to protect the tank integrity. If the pressure switch malfunctions, this valve releases air to prevent tank explosion. The compressor runs automatically to maintain pressure within the tank for consistent performance. However, strict adherence to the duty cycle is required for longevity. Do not operate for more than 15 percent within a single hour of running time. Overheating triggers thermal protection cutting the power automatically. It restarts once cooled down to normal levels. The oil-free design guarantees clean air output without contamination risks.

Usage Guidelines

Operation must remain horizontal during use to ensure longevity and proper internal function as specified. Tilting can damage internal components or the air pump mechanism during operation. Drain condensation daily by opening the ball valve at the tank bottom to remove moisture. Water buildup contains oil residues and must be disposed of responsibly in appropriate centers. Clean the exterior with a damp cloth only. Never use solvents which damage plastic parts. Keep away from water sources and wet hands to avoid electrical shock. Extension cables should not exceed 5 meters to prevent voltage drop.

Maintenance and Storage

Proper care extends machine life significantly. Inspect cables and plugs regularly for damage. Never remove parts without qualification or training from a service center. Store the unit vertically only when not in use to prevent internal settling or damage. Keep children and animals away from the work area at all times. Do not direct the air jet at body parts to avoid injury. Wear safety goggles always. Follow the manual instructions carefully before mounting or maintaining the compressor to ensure safety. This ensures safety and optimal performance for all pneumatic tools connected to the quick coupler. Warranty voids if used in commercial settings by the manufacturer.

Troubleshooting Common Issues

If the unit stops automatically, check for overheating and allow cooling. Low pressure might indicate leaks or clogged filters. Air leakage from the switch valve requires cleaning the seating. Ensure the plug is firmly connected to the socket. Contact authorized service centers for pressure switch failures. Do not attempt repairs yourself. Ensure the compressor is drained before packing it away. This prevents internal rust and damage during transport.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly