Zipper ZI-RAM80C Manual
PDF manual · 111 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Zipper ZI-RAM80C manual using AI
Get instant AI answers from your Zipper ZI-RAM80C manual
Ask anything about the Zipper ZI-RAM80C. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend ZI-RAM80C?
Yes NoFrequently Asked Questions
It is intended for earthworks, foundation trench tamping, pavement and street work, landscaping, and compacting suitable soil in restricted spaces. It should only be used according to safety, operating, and maintenance guidance.
Is this answer helpful?
The rammer uses unleaded petrol with a minimum RON 95 octane rating. Its fuel tank capacity is 2.7 litres. Refuel outdoors or in a well-ventilated area, with the engine off and cooled down.
Is this answer helpful?
The ZI-RAM80C provides a tamping force of 10 kN. Its vibration frequency is listed at 600 to 700 vibrations per minute, supporting controlled soil compaction.
Is this answer helpful?
No. It should not be used on concrete, frozen ground, rocky surfaces, or very hard compacted ground. On these surfaces, the machine may jump rather than compact correctly, which can damage the tamping foot and engine.
Is this answer helpful?
Switch off the engine before moving it. The transport wheels can be used for short distances on firm, level ground. For lifting, use the designated lifting point. Secure the rammer against shifting or tipping during vehicle transport.
Is this answer helpful?
Change engine oil and tamper oil after the first 20 operating hours. Afterwards, change them every 200 operating hours according to the maintenance schedule. Use SF 15W-40 oil and avoid overfilling.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- 10 kN tamping force supports effective compaction for trenches, earthworks, paths, and pavement-related jobs.
- Compact 285 mm tamping foot is suited to narrow areas and locations with restricted access.
- 4.1 kW 4-stroke petrol engine provides independent operation without reliance on electrical power.
- Transport wheels and a lifting point improve handling during short moves and loading.
- Clear controls for choke, throttle, fuel supply, ignition, and recoil starting support practical operation.
Disadvantages
- At 80 kg, the machine is heavy and should not be lifted by one person.
- Noise level of 108 dB(A) and vibration exposure require suitable hearing protection and regular breaks.
- Not suitable for concrete, frozen ground, very hard compacted surfaces, or rocky soil.
- Performance depends on correct soil moisture; overly wet or dry ground can reduce compaction quality.
- Requires routine checks and servicing of engine oil, tamper oil, air filter, spark plug, and fasteners.
Product Specification
Power
5.50 hp, 5.49 hp, 4-stroke
Work plate
14.17 x 11.22 in
Compaction pressure
2,248.12 lb
Tank capacity
0.71 gal
Noise level
108 dB(A)
Weight
176.37 lb
Product Description
Zipper ZI-RAM80C Petrol Vibratory Rammer - Read, Download & Print Free
The Zipper ZI-RAM80C Petrol Vibratory Rammer is a practical compaction machine designed for demanding groundwork, trench filling, pavement maintenance, and landscaping tasks. Powered by a reliable 4-stroke, single-cylinder petrol engine, it delivers focused impact force for compacting soil in confined areas where larger plate compactors may be difficult to use.
With a maximum engine output of 4.1 kW and a tamping force of 10 kN, this rammer is built to support effective compaction of suitable granular and cohesive soils. Its 285 mm wide tamping foot and 360 mm plate length provide a compact working profile, helping operators work along narrow trenches, edges, pathways, and foundation areas. The machine advances at approximately 10 to 13 metres per minute, allowing controlled progress without forcing it forward manually.
Built for Practical Site Work
The Zipper ZI-RAM80C Petrol Vibratory Rammer uses unleaded RON 95 petrol and has a 2.7 litre fuel tank. A throttle lever, choke, fuel valves, ignition switch, and recoil starter give the operator direct control of starting and operation. Cold and warm starting procedures are clearly distinguished, making it easier to prepare the engine correctly for the conditions.
At 80 kg, the rammer has a robust, stable construction for ground compaction work. A protective frame helps guard key components, while the guide handle supports two-handed operation. Integrated transport wheels assist with moving the machine over short distances on firm, level surfaces. For lifting and longer transport, the dedicated lifting point and secure tie-down practices are important.
Operating and Care Considerations
For the best compaction result, soil moisture matters. Very dry ground can create excess dust, while overly wet soil can reduce compaction quality and may cause the engine to stall. The rammer should not be used on concrete, frozen ground, hard compacted surfaces, or rocky material, as this can cause damaging impacts instead of proper vibration.
Routine care helps protect performance. Operators should check fuel, oil levels, fasteners, leaks, and machine condition before use. The engine and tamper system both use SF 15W-40 oil, with specified capacities of 0.6 litre and 0.8 litre respectively. Regular air-filter cleaning, spark-plug inspection, and scheduled oil changes are essential for dependable operation.
Note: Wear safety footwear, gloves, eye protection, and hearing protection. Operate outdoors or in well-ventilated areas only, keep hands and feet away from the tamping foot, and take regular breaks to limit vibration exposure.
Search for 67,706 Manuals online
Type-in Brand or Model