Manual.ly Logo

Zipper ZI-HS8TN Manual

0.0 · 0 Ratings

PDF manual · 35 Pages

English

M: gpt-5.6-terra
page

/ 35

Loading...
27c8182e805ea0130c2c7d3d8d3c2943435e page 12
PREFACE (EN)
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at 18
ZI-HS8TN
12 PREFACE (EN)
Dear customer!
This operating manual contains information and important notes on commissioning and
handling the log splitter ZI-HS8TN.
In the following, the usual trade name of the device (see cover sheet) in this operating manual
is replaced by the designation "machine".
The operating manual is part of the machine and must not be removed. Keep it for future
reference and include this manual with the machine if it is passed on to third parties!
Observe the safety instructions!
Read these instructions carefully before use. This facilitates proper handling and
prevents misunderstandings and possible damage. Follow the warnings and safety
instructions. Failure to do so may result in serious injury.
Due to the constant further development of our products, illustrations and contents may differ
slightly. If you find any errors, please inform us.
Subject to technical changes!
Copyright
© 2018
This documentation is protected by copyright. Any unauthorized duplication, translation or use
of pictures, illustrations or text of this manual will be pursued by law.
The place of jurisdiction is the regional court Linz or the court responsible for 4707
Schlüsslberg.
Customer support:
ZIPPER MASCHINEN GmbH
Gewerbepark 8, 4707
Schlüsslberg
AUSTRIA
Tel.: +43 7248 61116-700
Fax: +43 7248 61116–720

Chat with your Zipper ZI-HS8TN manual using AI

Get instant AI answers from your Zipper ZI-HS8TN manual

Ask anything about the Zipper ZI-HS8TN. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend ZI-HS8TN?

Yes No

Frequently Asked Questions

A

The Zipper ZI-HS8TN provides a maximum splitting force of 8 tons. Its hydraulic system operates at up to 21 MPa, giving it the pressure needed for suitable logs within the stated size limits.

Is this answer helpful?

A

It is designed for logs measuring 8 to 30 cm in diameter and 10 to 50 cm in length. Logs should be placed vertically, aligned with the grain, and positioned squarely on the support table.

Is this answer helpful?

A

The splitter requires a 400 V, 50 Hz, three-phase power supply. The electrical installation should include appropriate protection, including a residual current device rated at no more than 0.03 A and a maximum 16 A fuse.

Is this answer helpful?

A

Both control levers must be pressed to start the wedge movement. Releasing one lever stops the wedge in position. Releasing both levers sends the ram back to its upper position, helping keep hands away from the splitting zone.

Is this answer helpful?

A

Check the hydraulic oil level regularly and change the oil completely at least once per year. Low oil can damage the pump, while overfilling can overheat the hydraulic system.

Is this answer helpful?

A

It can be used in a well-ventilated outdoor work area, but never in rain. Set it on firm, level, non-slip ground and ensure there is sufficient lighting and clear space around the machine.

Is this answer helpful?

M: gpt-5.6-terra

Advantages and Disadvantages

Advantages

  • 8-ton splitting force and 21 MPa hydraulic pressure support demanding firewood preparation.
  • Adjustable ram stroke can reduce wasted travel when processing shorter logs.
  • Two-hand controls stop wedge movement when one lever is released, supporting controlled operation.
  • Adjustable log holders, support table, wheels, and transport handle improve everyday usability.
VS

Disadvantages

  • Requires a 400 V three-phase electrical supply, which may not be available at every property.
  • At 108.8 kg net weight, the machine needs careful handling and may require assistance during transport.
  • Maximum log length is 50 cm, limiting use with longer timber.
  • Hydraulic oil checks, annual oil changes, and ram greasing are necessary for reliable operation.
M: gpt-5.6-terra

Product Description

Zipper ZI-HS Hydraulic Log Splitter - Read, Download & Print Free

The Zipper ZI-HS8TN Hydraulic Log Splitter is built for efficient firewood preparation where dependable power, controlled operation, and practical handling matter. Designed to split logs vertically along the grain, this robust three-phase machine combines an 8-ton splitting force with a stable frame and adjustable working features for demanding domestic wood processing.

Powerful Hydraulic Performance

A 3500 W S6 motor running on a 400 V three-phase supply drives the hydraulic system, delivering up to 21 MPa of pressure. The splitter handles logs from 8 to 30 cm in diameter and 10 to 50 cm in length, making it suitable for many common firewood sizes. Its 48.5 cm ram travel provides useful reach, while the forward speed of 6 cm/s supports controlled splitting and the 19.4 cm/s return speed helps keep work moving.

The Zipper ZI-HS Hydraulic Log Splitter uses a reinforced splitting wedge designed for repeated use. The wedge can be sharpened with a fine file when needed, helping maintain clean, reliable splitting performance over time. An adjustable ram stroke also lets the operator reduce unnecessary return travel for shorter logs.

Designed for Controlled Operation

Safety-focused features include two-hand control, which requires both levers to begin the splitting movement. Releasing one lever stops the wedge, while releasing both returns the ram to its upper position. Adjustable log holders help secure the timber and allow the control position to be matched to log diameter.

The machine should be installed on a level, solid, non-slip surface and fixed through the frame mounting holes. Logs must be placed upright and squarely against the support table and wedge. The unit is intended for one operator during the splitting cycle, with hands kept clear of the splitting area at all times.

Practical Setup and Maintenance

The splitter includes wheels and a transport handle for short-distance movement on firm, level ground. At 108.8 kg net weight, careful handling or assistance is important when relocating it. Before operation, check the motor rotation direction, vent the hydraulic system by loosening the tank cap, and apply a thin layer of grease to the ram surface.

Routine care is straightforward: clean and grease the ram after use, check hydraulic oil regularly, and replace the oil completely once each year. The 4-liter hydraulic system supports recommended oils such as Shell Tellus 22 or Mobil DTE 11. Keeping the oil at the correct level helps prevent pump damage, excess noise, and overheating.

Note: Operate only in dry, well-lit conditions with suitable protective equipment. Never split wet wood, angled logs, or timber containing nails, wire, or other foreign objects.

M: gpt-5.6-terra

© Copyright 2026 Manual.ly