Manual.ly Logo

Zipper ZI-EWB260 Manual

0.0 · 0 Ratings

PDF manual · 27 Pages

English

M: QW-35-FL
page

/ 27

Loading...
913ca83335bc4af927349f478917191c3f36 page 17
TROUBLESHOOTING
ZIPPER MASCHINEN GmbH www.zipper-maschinen.at 23
ZI-EWB260
14.3 Storage
• Clean thoroughly all components before storage.
• Store all components separately in a dry area at not less than 0 ° C (optimum for battery 10-25°C).
• Charge the battery fully before storing.
NOTICE
During longer standstill but at least after three month charge the battery.
14.4 Disposal
Observe the national waste disposal regulations. Never dispose of the machine, ma-
chine components or equipment in residual waste. If necessary, contact your local
authorities for information on the disposal options available.
If you buy a new machine or an equivalent device from your specialist dealer, he is
obliged in certain countries to dispose of your old machine properly.
15 TROUBLESHOOTING
BEFORE YOU START WORKING FOR THE ELIMINATION OF DEFECTS, UNPLUG THE BATTERY.
Trouble
Possible cause
Solution
No electrical support
• Battery is not charged
• Recharge battery
• Motor stucks
• Check motor
• Power switch is damaged
• Check switch
• Broken or loose cables
• Check cables
No charging of battery
• Loosen cable
• Check cable connection
16 ERSATZTEILE / SPARE PARTS
16.1 Ersatzteilbestellung / Spare parts order
(DE) Mit ZIPPER-Ersatzteilen verwenden Sie Ersatzteile, die ideal aufeinander abgestimmt sind. Die opti-
male Passgenauigkeit der Teile verkürzen die Einbauzeiten und erhöhen die Lebensdauer.
HINWEIS
Der Einbau von anderen als Originalersatzteilen führt zum Verlust der Garantie!
Daher gilt: Beim Tausch von Komponenten/Teile nur vom Hersteller empfohlene Ersatz-
teile verwenden.
Bestellen Sie die Ersatzteile direkt auf unserer Homepage – Kategorie ERSATZTEILE,
oder kontaktieren Sie unseren Kundendienst
• über unsere Homepage – Kategorie SERVICE/NEWS – ERSATZTEILANFORDERUNG,
• per Mail an eg01@zipper-maschinen.at.
Geben Sie stets Maschinentype, Ersatzteilnummer sowie Bezeichnung an. Um Missverständnissen vorzu-
beugen, empfehlen wir, mit der Ersatzteilbestellung eine Kopie der Ersatzteilzeichnung beizulegen, auf der
die benötigten Ersatzteile eindeutig markiert sind, falls Sie nicht über den Online-Ersatzteilkatalog anfra-
gen.
(EN) With original ZIPPER spare parts you use parts that are attuned to each other shorten the installation
time and elongate your products lifespan.
NOTE
The installation of parts other than original spare parts leads to the loss of the guarantee!
Therefore: When replacing components/parts, only use spare parts recommended by the
manufacturer.

Chat with your Zipper ZI-EWB260 manual using AI

Get instant AI answers from your Zipper ZI-EWB260 manual

Ask anything about the Zipper ZI-EWB260. Answers come from this manual, with the pages they are based on.

ZI-EWB260 Maintenance Schedule

Remind me when maintenance is due
Every 3 months
Charge the battery during storage

If the machine is not used for a long period, charge the battery at least every three months to maintain its health.

Show in the manual (page 23)
Yearly
Replace gearbox oil

Drain old gear oil and refill with new GL4 (SAE80) oil (100 ml). Remove battery before starting this maintenance task.

Show in the manual (page 22)
Before each use
Check cables for tight fit and damage

Inspect electrical cables to ensure they are securely connected and free from damage before operating the machine.

Show in the manual (page 22)
After each use
Clean the machine surface

Wipe outer parts with a damp sponge using mild detergent. Never use running water or high-pressure cleaners on electronic parts.

Show in the manual (page 22)
Regularly
Check safety stickers condition

Verify that warning and safety labels are present and legible. Replace them immediately if they are illegible or missing.

Show in the manual (page 22)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend ZI-EWB260?

Yes No

Frequently Asked Questions

A

The machine is designed to carry a maximum load of 260 kilograms or 100 liters of material. Exceeding this limit violates technical restrictions and may void warranties or cause damage.

Is this answer helpful?

A

Using the original charger with a 230-volt connection, the battery typically requires about three hours to reach a full charge state from empty conditions.

Is this answer helpful?

A

No, you must never use the machine in rain or damp environments. Operating it in wet conditions creates severe electrical hazards and risk of injury.

Is this answer helpful?

A

For hobby or amateur use, the company grants a warranty period of two years starting from the date of purchase. Professional use is covered for one year only.

Is this answer helpful?

A

Original spare parts can be ordered directly through the official website or by contacting customer service via email. Only install approved components to maintain warranty validity.

Is this answer helpful?

A

You must exchange the gearbox oil once every year. Use GL4 SAE80 type oil and drain it after tipping the machine for access to the plug.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • High load capacity of 260 kg handles heavy materials efficiently
  • Electric support significantly reduces manual effort during transport tasks
  • Long battery life allows up to five hours of continuous work
  • CE conformal status ensures compliance with EU safety directives
VS

Disadvantages

  • Cannot operate machine in rain or wet environments due to electrical risks
  • Requires regular charging cycle which limits immediate availability
  • Warranty does not cover wear parts such as carbon brushes or filters
M: QW-35-FL

Product Specification

Battery

40V, 6Ah

Payload

max. 573.20 lbs

Volume

26.42 gal

Drive

Wheel Drive

Speed

max. 3.73 mph

Weight

79.37 lbs

M: QW-35-FL

Product Description

Transforming Heavy Lifting Tasks with Ease

Working on construction sites or gardening projects often involves moving heavy loads manually. This struggle is eliminated by the Zipper ZI-EWB260 Battery Wheelbarrow Manual. This comprehensive guide helps users maximize efficiency while maintaining high safety standards. The electric wheelbarrow stands out due to its advanced battery system and robust mechanical design tailored for demanding environments.

Technical Capabilities and Performance

The ZI-EWB260 boasts a powerful 350 watt motor driving a gearbox rated at 240 Nm torque. Users can transport up to 260 kg across the 960 x 600 mm tray effectively. The 40 volt direct current battery delivers six amp hours of energy lasting roughly five hours of continuous use. Speeds reach a maximum of six kilometers per hour making navigation manageable even on slight inclines.

Assembly and Setup Procedures

Before operation begins, correct assembly is crucial for stability. The process involves attaching the tray to the base frame using screws and nuts. The battery box and motor unit must be securely fixed to prevent vibration issues during transit. Handlebars require specific placement with the control unit on the right side for ergonomic operation. Cable connections between the motor control and battery box finalize the setup.

Safety Protocols and Usage Restrictions

Safety remains the top priority during every shift. Avoid operating the machine in wet conditions or rain to prevent electrical hazards. Ensure you are physically fit to handle the controls without distraction. Never leave the running machine unattended as unauthorized persons might attempt operation. Inspect all guards and safety markings regularly to ensure they are legible.

Charging and Battery Care

Recharging takes approximately three hours using the dedicated charger connected to 230 volts. Always remove the battery before storing the unit for long periods. Maintain storage temperature between zero and forty degrees Celsius to protect cell integrity. Charge fully before long standby times to avoid deep discharge cycles damaging the battery pack.

Maintenance and Warranty Details

Schedule annual gearbox oil changes using GL4 SAE80 specifications. Replace warning stickers immediately if they become illegible. The manufacturer provides two years warranty for amateur use and one year for professional applications. Retain proof of purchase documents to validate any future claims effectively. Troubleshooting common issues like no support usually involves checking battery charge levels. If the motor sticks inspect connections or contact an authorized workshop for internal repairs. This ensures quick resolution without unnecessary downtime affecting productivity levels significantly.

M: QW-35-FL

© Copyright 2026 Manual.ly