Zipper ZI-ELB70 Manual
PDF manual · 77 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Zipper ZI-ELB70 manual using AI
Get instant AI answers from your Zipper ZI-ELB70 manual
Ask anything about the Zipper ZI-ELB70. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend ZI-ELB70?
Yes NoFrequently Asked Questions
It is designed for drilling circular holes in soil such as loam, topsoil, and sand. Typical uses include planting small trees and installing fence posts. It is intended for outdoor garden and landscaping work.
Is this answer helpful?
The supplied set includes 100 mm, 150 mm, and 200 mm diameter auger bits. These sizes allow users to select a suitable hole width for different plants, posts, and ground-preparation tasks.
Is this answer helpful?
The two-stroke engine uses a 40:1 gasoline-to-oil mixture. Use clean, suitable two-stroke fuel, prevent debris from entering the tank, and shake the tank before each use to help keep the fuel mixture properly distributed.
Is this answer helpful?
No. The auger is not intended for ice, stone, or rock. Stony ground can damage the drill or cause it to jump. Roots and large stones also require extra caution because they can jam the bit.
Is this answer helpful?
The standard auger bits have a drilling length of 700 mm. A separately available 450 mm extension bar can be fitted when additional depth is needed, provided it is securely installed with the specified pins.
Is this answer helpful?
Inspect fasteners, drill bits, and the fuel tank before use. Clean the machine after operation. Clean the air filter every 20 to 30 working hours and the spark plug every 25 hours. Carburetor work should be handled by trained personnel.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- 51.7 cc two-stroke engine delivers 1.5 kW for independent outdoor drilling.
- Includes 100 mm, 150 mm, and 200 mm auger bits for varied planting and post-hole tasks.
- Approximate 280 rpm drilling speed supports controlled progress in suitable soil.
- Optional 450 mm extension bar can increase reach for deeper holes.
- Recoil start, primer pump, choke, and electronic ignition support routine operation.
Disadvantages
- Not intended for ice, stone, rock, or areas with buried utility lines.
- At 114 dB(A) sound power, hearing protection is essential during use.
- Vibration rating of 18 m/s2 means breaks and careful handling are important.
- Requires a 40:1 gasoline-oil mixture and fuel draining before long-term storage.
- Roots and large stones can jam the bit and create kickback risk.
Product Specification
Power
1.5 kW, 2.04 hp, 3.15 cu in, 2-stroke
Idle speed
3,000 rpm
Special features
Additional handle, vibration damping
Tank capacity
0.32 gal
Noise level
114 dB(A)
Weight
25.35 lb
Package contents
3x drill bits (3.94/5.91/7.87 in)
Product Description
Zipper ZI-ELB70 Gasoline Earth Auger - Read, Download & Print Free
The Zipper ZI-ELB70 Gasoline Earth Auger is a practical outdoor tool designed for creating clean, circular holes in soil. It is well suited to common garden and landscaping tasks such as planting young trees, fitting fence posts, and preparing holes in loam, topsoil, or sandy ground. Its gasoline-powered design gives users freedom to work away from electrical outlets, making it a useful choice for larger gardens and open work areas.
At the core of the auger is a 51.7 cc two-stroke engine rated at 1.5 kW at 7,500 rpm. The drilling speed is approximately 280 rpm, providing controlled rotation for steady progress through suitable soil. A recoil starter, electronic ignition, primer pump, choke, and throttle controls support routine starting and operation. The 1.2 L fuel tank uses a 40:1 gasoline-to-oil mixture, and the tank should be shaken before use to help maintain proper lubrication.
Versatility is a key feature of the ZI-ELB70. The supplied auger bits measure 100 mm, 150 mm, and 200 mm in diameter, allowing the operator to match hole width to the task. Each standard bit has a drilling length of 700 mm. An extension bar is available separately and adds 450 mm for applications that require greater reach. The drilling assembly is secured with the supplied shear pin and split pin, which should be checked before every job.
The machine weighs 8.5 kg without a drill bit and is intended to be held firmly with both hands in a vertical, drill-down position. For best results, begin at low speed, increase throttle gradually, and allow the auger's own weight to do much of the work rather than forcing it into the ground. Deep holes should be completed in two or three stages. Extra care is needed around roots and stones, since a sudden blockage can cause kickback.
Safety and upkeep
This earth auger is intended for outdoor use only. Operators should wear hearing protection, gloves, safety footwear, eye or face protection, a helmet, and close-fitting work clothing. Check the area for buried electric, gas, water, or telephone lines before drilling. Keep people and pets well clear, avoid operating on icy or slippery surfaces, and never refuel near flames or while the engine is hot.
Routine care helps protect performance. Clean soil and debris after use, inspect fasteners and drill bits before starting, clean the air filter every 20 to 30 operating hours, and clean the spark plug every 25 hours. For storage longer than 30 days, drain the fuel tank and carburetor after the engine has cooled.
Note: The ZI-ELB70 is not designed for drilling in ice, stone, or rock. Use only compatible, undamaged auger bits and seek trained service support for carburetor adjustments or complex repairs.
Search for 67,706 Manuals online
Type-in Brand or Model
saepe_qui
4 months ago
Is this drill suitable for occasional home use, and is it easy to handle?
Manual.ly
4 months ago
Yes. Reviews indicate that it is a good-value tool for household drilling tasks, with straightforward handling and results that meet expectations. It is not intended as professional-grade equipment, but it is well suited to occasional DIY use.