Manual.ly Logo

Zipper ZI-COM50-10 Manual

0.0 · 0 Ratings

PDF manual · 26 Pages

English

M: OA-GPT-54-NAN
page

/ 26

Loading...
cbbd0fc3953695b188e7ceaa32a7c108033f page a
WARTUNG
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at 10
ZI-COM50-10
9 WARTUNG
ACH T U N G
Vor Wartungsarbeiten:
Maschine ausschalten und Netzstecker ziehen!
Motor abkühlen lassen!
Kessel drucklos machen
Die Maschine ist wartungsarm und enthält nur wenig Teile, die der Bediener einer Instandhaltung
unterziehen muss.
Störungen oder Defekte, die die Sicherheit der Maschine beeinträchtigen können, umgehend beseitigen
lassen.
HI N W E I S
Nur ein regelmäßig gewartetes und gut gepflegtes Gerät kann ein zufrieden stellendes Hilfsmittel sein.
Wartungs- und Pflegemängel können zu unvorhersehbaren Unfällen und Verletzungen führen.
Reparaturen die spezielle Fachkenntnisse erfordern, sollten nur von autorisierten Service Centern
durchgeführt werden.
Unsachgemäßer Eingriff kann das Gerät beschädigen oder Ihre Sicherheit gefährden.
9.1 Reinigung
Schutzvorrichtungen, Luftschlitze und Motorengehäuse so staub- und schmutzfrei wie möglich halten.
Maschine mit einem feuchten Tuch und gegebenenfalls etwas handelsüblichem Spülmittel säubern oder
mit Druckluft bei niedrigem Druck ausblasen.
HI N W E I S
Der Einsatz von Lösungsmitteln, aggressiven Chemikalien oder Scheuermitteln kann zu
Lack- und anderen Sachschäden an der Maschine führen!
Daher gilt: Bei der Reinigung nur Wasser und ggf. milde Reinigungsmittel verwenden
Blanke Flächen der Maschine gegen Korrosion imprägnieren (z.B. mit Rostschutzmittel WD40)!
9.2 Instandhaltung und Wartungsplan
Kontrollen zur Instandhaltung der Maschine
Lockere oder verlorene Schrauben
Vor jeder Inbetriebnahme
Beschädigung von Maschinenteilen
Vor jeder Inbetriebnahme
Maschine säubern
Nach jeder Inbetriebnahme
Luftfilter reinigen
Alle 20-30 Betriebsstunden
9.2.1 Kondenswasser
Für dauerhafte Haltbarkeit des Druckbehälters (2)
ist nach jedem Betrieb das Kondenswasser durch
Öffnen der Ablassschraube (1) abzulassen. Zum
Öffnen muss die Ablassschraube im Uhrzeigersinn
gedreht werden. Vergewissern sie sich das ein max.
Druck von 1bar für diese Tätigkeit nicht
überschritten wird. Neigen Sie zusätzlich den Kessel
so, dass die Ablassschraube der niedrigste Punkt im
Kessel ist und das Kondenswasser vollständig
ablaufen kann. Drehen Sie danach die
Ablassschraube zum Verschließen entgegen dem
Uhrzeigersinn.
Kontrollieren Sie den Druckbehälter vor jedem
Betrieb auf Rost und Beschädigungen. Der
Kompressor darf nicht mit einem beschädigten oder
rostigen Druckbehälter betrieben werden. Stellen Sie Beschädigungen fest, so wenden sie sich bitte an
die Kundendienstwerkstatt.

Chat with your Zipper ZI-COM50-10 manual using AI

Get instant AI answers from your Zipper ZI-COM50-10 manual

Ask anything about the Zipper ZI-COM50-10. Answers come from this manual, with the pages they are based on.

ZI-COM50-10 Maintenance Schedule

Every 20-30 operating hours
Clean air filter

Clean the air filter every 20 to 30 working hours to ensure proper operation.

Show in the manual (page 10)
After every use
Drain condensation water

Open the drain screw to release condensed water from the tank after each use. Ensure pressure does not exceed 1 bar.

Show in the manual (page 10)
Before every use
Inspect for loose screws and damage

Check all screws, nuts, and bolts for tightness and inspect machine parts for any damage before operation.

Show in the manual (page 10)
After every use
Clean machine exterior

Wipe the machine with a damp cloth or blow with low-pressure compressed air. Do not use solvents.

Show in the manual (page 10)
Before every use
Check pressure vessel condition

Inspect the pressure vessel for rust and damage. Do not operate if damaged or rusty.

Show in the manual (page 10)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend ZI-COM50-10?

Yes No

Frequently Asked Questions

A

It is best for light to moderate compressed-air tasks such as inflating tires, operating staplers or nailers, and powering other small pneumatic tools that do not require nonstop airflow.

Is this answer helpful?

A

The compressor is designed for a maximum operating pressure of 10 bar, making it suitable for many common home and workshop applications.

Is this answer helpful?

A

Yes. It includes wheels and a transport handle, which makes relocation easier despite the 50-liter tank size.

Is this answer helpful?

A

Yes. Routine care is important. The tank should be drained of condensation after use, and hoses, seals, screws, and the air filter should be checked regularly.

Is this answer helpful?

A

No. This model is intended for intermittent use rather than continuous industrial duty, so it should be given rest periods and used within its operating limits.

Is this answer helpful?

A

Keep the unit in a dry, ventilated area, do not exceed pressure limits, wear protective equipment when needed, and never point compressed air at people. Disconnect power before maintenance.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • 50-liter tank provides a useful air reserve for short pneumatic jobs.
  • 10 bar max pressure supports a wide range of light workshop tasks.
  • Easy-to-read pressure gauge and adjustable regulator improve control.
  • Wheels and transport handle make it easier to move around the workspace.
  • Clear maintenance guidance helps extend the compressor’s service life.
VS

Disadvantages

  • Not designed for continuous industrial or heavy-duty operation.
  • Noise level may be noticeable in smaller indoor spaces.
  • Requires regular condensate draining and maintenance checks.
  • Best used in dry environments, so it is less flexible in harsh conditions.
M: OA-GPT-54-NAN

Product Specification

Power

2.01 hp (230V)

Suction capacity

58.12 gal/min

Max. pressure

145.04 psi

Speed

4,000/min

Tank capacity

13.21 gal

Orientation

vertical

Special features

oil-free pump, 1 cylinder, pressure gauge, pressure regulator, carrying handle, castors

Noise level

97 dB(A)

Dimensions (HxWxD)

40.55x13.58x12.80in

Weight

50.71 lb

M: OA-GPT-54-NAN

Product Description

Zipper ZI-COM50-10 Electric Compressor

The Zipper ZI-COM50-10 Electric Compressor is built for users who want compact size, reliable pressure delivery, and straightforward operation in a home workshop or garage setting. With a 230 V / 50 Hz motor, 1.5 kW output, and a 50-liter air tank, it offers a practical balance between portability and usable air reserve. Its maximum operating pressure of 10 bar makes it suitable for many everyday compressed-air tasks, from inflating tires to powering light pneumatic tools.

What stands out first is the compressor’s clean, user-friendly layout. The pressure regulator, manometer, quick coupler with Y-connector, transport handle, and wheels make it easy to move and control. It is designed to be placed near the point of use, helping reduce unnecessary hose length and pressure loss. The tank fills efficiently, and the machine is intended for short-duty cycling rather than continuous industrial operation, which makes it a good fit for practical, intermittent work.

The technical profile is also appealing for users who value clarity. The unit delivers an air intake of around 240 l/min, reaches 7.5 bar in a reasonable time, and includes safety-focused guidance on setup, maintenance, and pressure handling. The manual emphasizes routine checks, condensate draining, and correct storage, all of which help extend service life. For anyone searching for the Zipper ZI-COM50-10 Electric Compressor Manual, the key takeaway is simple: this model is built around safe, efficient, and responsible use.

In daily use, the compressor is best suited for tasks such as tire inflation, stapling, nailing, or light air-powered tools that do not demand nonstop airflow. It should be operated in dry, well-ventilated spaces, and users need to respect the pressure limits and service instructions. The noise level is noticeable, as expected from a workshop compressor, but the overall design keeps the experience manageable for occasional to regular home use.

Notes

  • Drain condensation after every use to protect the tank.
  • Check hoses, couplings, and seals regularly for wear.
  • Do not exceed the specified pressure or duty cycle.
  • Use only in dry conditions and keep the unit under supervision.

Summary

The Zipper ZI-COM50-10 is a dependable electric compressor for users who need a compact 50-liter solution with solid pressure output and simple controls. It combines practical performance with essential safety features, making it a sensible choice for workshop and household air applications.

M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly