Manual.ly Logo

Zipper ZI-BTM Series Manual

0.0 · 0 Ratings

PDF manual · 67 Pages

English

M: QW-35-FL
page

/ 67

Loading...
3fced9371be80cfa3f792eb60628aac21f67 page 19
PREFACE (EN)
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at 25
ZI-BTM130
10 PREFACE (EN)
Dear Customer!
This manual contains important information and advice for the correct and safe use and
maintenance of the concrete mixer ZI-BTM130.
Following the usual commercial name of the machine (see cover) is substituted in this manual with
the name "machine".
The manual is part of the machine and may not be stored separately. Read it profoundly before first
use of the machine and keep it for later reference. When the machine is handed to other persons
always put the manual to the machine.
Please follow the security instructions!
Please read the entire manual, to prevent misunderstandings, machine damage or even injuries!
Due to continuous development of our products illustrations, pictures might differ
slightly.
If you however find errors in this manual, please inform us.
Technical changes excepted!
Copyright law
© 2018
This manual is protected by copyright law – all rights reserved. Especially the reprinting as well as
the translation and depiction of pictures will be prosecuted by law. Court of jurisdiction is the
Landesgericht Linz or the competent court for 4707 Schlüsslberg, AUSTRIA.
Customer Support
ZIPPER MASCHINEN GmbH
Gewerbepark 8, 4707 Schlüsslberg
AUSTRIA
Tel.: +43 7248 61116-700
Fax: +43 7248 61116–720

Chat with your Zipper ZI-BTM Series manual using AI

Get instant AI answers from your Zipper ZI-BTM Series manual

Ask anything about the Zipper ZI-BTM Series. Answers come from this manual, with the pages they are based on.

ZI-BTM Series Maintenance Schedule

After every usage
Clean the drum and machine

Clean the drum with water after each use to remove cement and mortar residues. Do not tap the motor casing or drum with hard objects.

Show in the manual (page 22)
Every 100 operating hours
Lubricate moving parts

Before first operation and every 100 hours, lubricate all moving connecting parts with a thin layer of oil or grease after removing dust.

Show in the manual (page 22)
Every 25 operating hours
Grease the sprocket

Apply grease to the sprocket (gear ring) after every 25 hours of operation.

Show in the manual (page 22)
Every 25 operating hours
Check V-belt tension

Remove the motor cover and check belt tension by pressing; it should yield about 5mm. Replace if worn or adjust tension if loose.

Show in the manual (page 22)
Regularly
Inspect safety stickers

Check regularly that warning and safety labels are present and clearly legible. Replace immediately if unreadable or missing.

Show in the manual (page 22)
M: QW-35-FL

Ask a Question

0/1000

Do you recommend ZI-BTM Series?

Yes No

Frequently Asked Questions

A

The primary difference lies in the drum capacity and motor power. The ZI-BTM160 has a 160-liter drum and a 650W motor, while the ZI-BTM180 features a larger 180-liter drum and a more powerful 800W motor. Both share similar dimensions and operational features.

Is this answer helpful?

A

No, the machine is strictly intended for mixing concrete and mortar. Using it for food, explosives, flammable liquids, or other substances is prohibited and voids the warranty. It is not designed for any other industrial applications outside its specified scope.

Is this answer helpful?

A

You should lubricate all moving connecting parts before the first use and subsequently every 100 operating hours. Additionally, the sprocket should be greased every 25 hours of operation to ensure smooth functioning and prevent wear.

Is this answer helpful?

A

Absolutely not. The manual explicitly states that the machine must never be left running unattended. You must switch off the device and wait for the drum to stop completely before leaving the work area to prevent accidents.

Is this answer helpful?

A

The machine must be connected to a grounded power socket protected by a 16A fuse. It requires a residual current device (RCD) with a maximum leakage current of 30mA. Only a qualified electrician should perform the electrical installation.

Is this answer helpful?

A

Clean the drum with water immediately after each use. For stubborn cement residues, fill the drum with water and gravel, run the machine for a few minutes, and then empty it. Do not use harsh chemicals or metal tools that could damage the surface.

Is this answer helpful?

A

If the motor hums, check if the sprocket is blocked by debris or if the capacitor is defective. Turn off the machine, unplug it, and clean the sprocket segments. If the issue persists, contact customer service as the capacitor may need replacement.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Efficient motor options available for different workload requirements
  • Easy-to-use tilting mechanism with foot pedal control
  • Durable construction suitable for professional and heavy-duty use
  • Clear safety markings and comprehensive manual included
  • Simple maintenance schedule ensures long machine life
VS

Disadvantages

  • Requires assembly which may take time for first-time users
  • Heavy weight makes transport difficult without proper handles
  • Extension cord length limitations affect mobility on large sites
  • Maintenance requires regular inspection of belts and gears
  • Must be operated by trained personnel to ensure safety compliance
M: QW-35-FL

Product Specification

Features

Handwheel, 18 positions

M: QW-35-FL

Product Description

The Zipper ZI-BTM Electric Concrete Mixer Manual: Your Guide to Efficient Mixing

The Zipper ZI-BTM Electric Concrete Mixer is a robust piece of construction equipment designed for professionals and DIY enthusiasts alike. Whether you are working on small home renovations or larger commercial projects, this machine offers the reliability needed to mix concrete and mortar effectively. The manual serves as an essential companion, guiding users through the safe assembly, operation, and maintenance of both the ZI-BTM160 and ZI-BTM180 models.

Understanding the Product

This electric mixer features a durable drum with capacities of 160 liters or 180 liters, depending on the specific model chosen. Powered by efficient motors ranging from 650W to 800W, these units operate at a consistent speed to ensure uniform mixing results. The design includes a swiveling wheel mechanism that allows for easy tilting and discharge of the mixture into wheelbarrows or directly onto the work surface. Safety is paramount, with clear warnings regarding rotating parts, electrical hazards, and the importance of using personal protective equipment.

Assembly and Setup

Setting up your Zipper ZI-BTM mixer is straightforward but requires attention to detail. The process involves mounting the transport wheels, attaching the support legs, and securing the drum halves together. Users must ensure all bolts are tightened correctly and that the V-belt tension is adjusted properly before the first use. Electrical connections must be made by a qualified electrician to a grounded socket with appropriate circuit protection to prevent accidents.

Operation and Maintenance

Operating the mixer involves simple controls: a green button to start and a red button to stop. The drum can be tilted using a foot pedal to release the locking plunger, allowing for smooth pouring. Regular maintenance is crucial for longevity. This includes cleaning the drum after every use, greasing the sprocket every 25 hours, and checking the belt tension regularly. Proper storage in a dry area will also protect the machine from corrosion and damage.

Important Notes

  • Always disconnect power before performing any maintenance.
  • Do not reach into the drum while it is rotating.
  • Use only extension cords with the correct cross-section for the cable length.
  • Keep children and unauthorized personnel away from the operating area.
M: QW-35-FL

© Copyright 2026 Manual.ly