Manual.ly Logo

Zipper ZI-BHA1500D Manual

4.8 · 5 Ratings

PDF manual · 68 Pages

English

M: QW-35-FL
page

/ 68

Loading...
5a48140cb1ee113b2a9b886275f284c744a8 page 15
WARTUNG
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at 21
ZI-BHA1500D
13 WARTUNG
ATTENTI ON
Perform all maintenance machine settings with the machine being
disconnected from the power supply!
Serious injury due to unintentional or automatic activation of the
machine!
The machine does not require extensive maintenance. If malfunctions and defects occur, let it be serviced by
trained persons only. Before first operation as well as later on every 100 operation hours you should lubricate all
connecting parts (if required, remove beforehand with a brush all swarfs and dust).
N O T I C E
Clean your machine regularly after every usage – it prolongs the machines lifespan and is a pre-requisite for a
safe working environment.
Repair jobs shall be performed by respectively trained professionals only!
Check regularly the condition of the security stickers. Replace them if required.
Check regularly the condition of the machine. Store the machine in a closed, dry location.
13.1 Maintenance plan
Inspections for the maintenance of the machine
Loose or missing screws
Daily before starting
Damage to any part
Daily before starting
Clean the machine
Daily before starting
Check tool mount to wear of
Every 100 working hours
13.2 Cleaning
After each workshift the machine has to be cleaned. Remove chips etc. with a suitable tool. Do not
remove them by hand (cutting injury!). Remove dust as well.
NOTICE
The usage of certain solutions containing ingredients damaging metal surfaces as well
as the use of scrubbing agents will damage the machine surface!
Clean the machine surface with a wet cloth soaked in a mild solution
13.3 Disposal
Do not dispose the machine in residual waste. Contact your local authorities for information
regarding the available disposal options. When you buy at your local dealer for a replacement unit,
the latter is obliged to exchange your old.
14 TROUBLE SHOOTING
BEFORE YOU START WORKING FOR THE ELIMINATION OF DEFECTS, DISCONNECT THE
MACHINE FROM THE POWER SUPPLY.
Trouble
Possible cause
Solution
Machine stops or
will not start
Saw unplugged
Cord damaged
Overload tripped
Check all power connections
Change cable
Allow motor to cool and reset by pushing off
switch
Impact system
blocks
High fat friction due to low temperatures
Moving parts are blocked
Warm up the machine in a warm environment
Change damaged parts
Drill stucks
Too much boring dust in the borehole
Disruptive reinforced steel
Clean the drill
Fix new borehole
MANY POTENTIAL SOURCES OF ERROR CAN BE CLEARED BY THE EXPERTLY CONNECTION
TO THE ELECTRICITY GRID.
NOTICE
Should you in necessary repairs not able to properly to perform or you have
not the prescribed training for it always attract a workshop to fix the problem.

Chat with your Zipper ZI-BHA1500D manual using AI

Get instant AI answers from your Zipper ZI-BHA1500D manual

Ask anything about the Zipper ZI-BHA1500D. Answers come from this manual, with the pages they are based on.

ZI-BHA1500D Maintenance Schedule

Daily
Check for loose or missing screws

Inspect the machine daily before starting work to ensure all screws are tight and present.

Show in the manual (page 14)
Daily
Inspect for damage

Check all parts of the machine daily before use for any signs of damage or wear.

Show in the manual (page 14)
After each use
Clean the machine

Thoroughly clean the machine after every shift. Remove chips and dust using a suitable tool, not by hand. Use only water and mild cleaners.

Show in the manual (page 14)
Every 100 operating hours
Lubricate moving connection parts

Before first use and then every 100 operating hours, lubricate all movable connection parts with a thin layer of oil or grease after removing dust.

Show in the manual (page 14)
Every 100 operating hours
Check tool mount for wear

Inspect the SDS-plus tool mount for signs of wear every 100 working hours.

Show in the manual (page 21)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend ZI-BHA1500D?

Yes No
0
User Pic

Lavon Boyle

4 months ago

Does this machine handle drilling into concrete effectively, and how is the overall build quality for the price?

0
User Pic

Manual.ly

4 months ago

Yes, multiple users confirm that the machine drills efficiently into concrete, including tasks like creating holes with large crowns in hollow-core floors. While some reviewers note that higher-end models feel more premium, the build quality and included accessories are considered excellent value for the price point.

M: QW-35-FL
M: QW-35-FL
0
User Pic

Zach Martin

5 months ago

What should I do if the switch gets stuck or the device malfunctions shortly after purchase?

M: QW-35-FL

Frequently Asked Questions

A

The Zipper ZI-BHA1500D can drill holes up to a maximum diameter of 32mm in standard materials.

Is this answer helpful?

A

Yes, the product comes with a durable case that stores the machine along with all included accessories like chisels, drills, and grease.

Is this answer helpful?

A

Use the dedicated selector switch labeled for drilling or hammering. Ensure the main switch is off before changing the mode.

Is this answer helpful?

A

Yes, but you should use the dust protection cap to prevent debris falling into your eyes and take frequent breaks due to the weight.

Is this answer helpful?

A

You should always wear safety goggles, hearing protection, a dust mask, and non-slip gloves. Avoid loose clothing and jewelry.

Is this answer helpful?

A

Lubricate all moving connection parts every 100 operating hours or before the first use to ensure smooth operation.

Is this answer helpful?

A

No, the machine must be protected from moisture. Do not operate it in rain or damp environments to avoid short circuits.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Powerful 1500W motor provides excellent torque for concrete and masonry work
  • SDS-plus chuck allows for fast and secure tool changes without extra tools
  • Comes with a full accessory kit including drills, chisels, and a carrying case
  • Dual-function switch enables easy transition between drilling and hammering modes
  • Class II double insulation ensures high safety standards against electric shock
VS

Disadvantages

  • High vibration levels may cause hand-arm fatigue during extended use without breaks
  • Noise level exceeds 100 dB, requiring mandatory hearing protection
  • Heavy weight of 4.9 kg can make overhead work physically demanding
  • Requires regular lubrication and maintenance to prevent component blockage
  • Dust collection requires frequent emptying of the cap during continuous drilling
M: QW-35-FL

Product Specification

Type

Rotary Hammer Drill

Power

1500W

No-load Speed

0-880 rpm

No-load Impact Rate

0-4350 bpm

Drilling Capacity

1.26 in

Impact Energy

1.52 ft-lb

Chuck Type

SDS-plus Quick-Change Chuck

Features

Variable Speed, Variable Impact Rate, Rotation Stop, Impact Stop, Soft Grip, Auxiliary Handle

Weight

10.8 lbs

Package Contents

Case, 5-piece Accessory Set

M: QW-35-FL

Product Description

Zipper ZI-BHA1500D Electric Drill-Chisel Hammer with Case + Accessories - Read, Download & Print Free

The Zipper ZI-BHA1500D is a robust and versatile power tool designed for professionals and serious DIY enthusiasts who demand reliability in demanding construction environments. This electric drill-chisel hammer combines high-performance drilling capabilities with powerful chiseling functions, making it an essential addition to any workshop or job site. Whether you are tackling concrete, brick, stone, or need to perform precision work on tiles and adhesives, this machine delivers consistent results.

Equipped with a powerful 1500-watt motor, the ZI-BHA1500D operates at a no-load speed of 880 revolutions per minute and delivers an impressive 4350 blows per minute. The SDS-plus chuck system ensures quick and secure tool changes, allowing users to switch effortlessly between drilling and hammering modes. The package includes a comprehensive set of accessories, such as pointed and flat chisels, various drill bits ranging from 8mm to 12mm, grease, carbon brushes, and a protective dust cap. All these items come neatly organized in a durable carrying case, ensuring your tools remain protected and accessible.

Safety is a top priority with this model. It features Class II protection, meaning double insulation eliminates the risk of electric shock even if the internal wiring fails. The device includes an auxiliary handle that can be adjusted to three positions for optimal control and reduced user fatigue. Users are advised to wear appropriate personal protective equipment, including safety goggles, ear protection, and a dust mask, especially when working overhead or in confined spaces. The manual emphasizes strict adherence to safety guidelines to prevent accidents involving rotating parts, flying debris, or electrical hazards.

Maintenance is straightforward, requiring regular cleaning after each use and lubrication every 100 operating hours. The machine is built to withstand harsh conditions but must be stored in a dry environment away from moisture. Troubleshooting common issues like a blocked impact system or a stuck drill bit is simple by following the step-by-step guide provided in the documentation. With its ergonomic design and powerful performance, the Zipper ZI-BHA1500D stands out as a reliable companion for heavy-duty tasks.

M: QW-35-FL

© Copyright 2026 Manual.ly