Manual.ly Logo

Wolf-Garten HT 40 eM Manual

0.0 · 0 Ratings

PDF manual · 188 Pages

English

M: QW-35-FL
page

/ 188

Loading...
e5cbb797038b12ca0205a46f026aa4a6ab61 page 19
Servicing
EN
25
Note
Try not to cut branches that are thicker than
16 mm in diameter. Such branches should
rst be cut with loppers to the level of the
hedge trimmer.
Attention!
Do not cut dead branches or similar hard objects.
Otherwise the tool may be damaged.
Horizontal cut
F
Î Position the cutter on the hedge at an angle be-
tween 5° and 10°.
Î Cut the hedge with a swinging movement.
Vertical cut
G
Î Position the blade parallel to the hedge.
Î Cut the hedge with a swinging movement from low
to high.
Removing the operating arm with permanently
installed power pack
E
Î Switching the device off.
Î Press the locking button [A] on the operating arm
1
.
Î Pull the operating arm fully out of the locator of the
hedge trimmer unit [B]
2
.
Servicing
WARNING!
Risk of injuries or material damage.
¾ Only clean or service the device when
the motor and the cutting tool are both
stationary.
¾ Before any work on the device, rst
remove the operating arm with the per-
manently installed power pack.
¾ Do not clean the device with water.
¾ Repair and service work as well as the
replacement of safety elements must
be performed by a qualied expert or
workshop.
¾ Wear safety gloves before any work on
the cutting blade.
Cleaning
Î Switch the device off and wait until the cutting tool
comes to a standstill before removing the oper-
ating arm.
Î Clean the hedge trimmer after every use, espe-
cially the ventilation slots, using a dry cloth or, in
the event of heavy soiling, a brush.
Î Carefully clean the cutting blade after each use.
Î After use, spray the cutting blade with conditioning
oil to ensure a long service life for the hedge
trimmer. Where possible, use an environmental-
ly-friendly lubricant.
Î Do not oil the hedge trimmer during use.
Î To oil the hedge trimmer, place it on its side and
apply a thin oil lm to the cutting blade.
Î During extended periods of hedge cutting, inter-
rupt your work frequently to oil the hedge trimmer
cutting blade.
Transport and storage
WARNING!
Risk of injuries due to the cutting tool.
¾ Before transport or storage, switch off
the device and wait until the cutting tool
comes to a standstill.
¾ Remove the operating arm before trans-
porting or storing the device.
¾ Always t the protective cover before
transport and storage.
Transport
Î Secure the device sufciently to prevent its unin-
tentional slipping if you are transporting it on or in
a motor vehicle.
Storage
Î Clean your device thoroughly at the end of every
season.
Î Always store the device in a dry and safe location
that is inaccessible to children.
Î Store the operating arm and hedge trimmer sep-
arately.
Î Store the operating arm in a cool and dry loca-
tion. Recommended storage temperature ap-
prox. 0 - 23°C.
Î Keep the hedge trimmer and especially its plastic
components away from brake uids, petrol,
mineral oil containing products, penetrating oils
etc. They contain chemical substances that can
damage, attack or destroy the plastic components
of the hedge trimmer.
Î Fertilizers and other garden chemicals contain
substances that may have a highly corrosive effect
on the metal parts of the hedge trimmer. Therefore
do not store your hedge trimmer in the vicinity of
these substances.

Chat with your Wolf-Garten HT 40 eM manual using AI

Get instant AI answers from your Wolf-Garten HT 40 eM manual

Ask anything about the Wolf-Garten HT 40 eM. Answers come from this manual, with the pages they are based on.

HT 40 eM Maintenance Schedule

After every use
Clean the hedge trimmer and ventilation slots

Switch off device, remove operating arm. Clean with dry cloth or brush if heavily soiled. Do not use water.

Show in the manual (page 25)
After every use
Clean the cutting blade

Carefully clean the cutting blade after each use to ensure proper operation.

Show in the manual (page 25)
After every use
Oil the cutting blade

Spray or apply a thin film of conditioning oil to the blade to ensure long service life. Use eco-friendly lubricants.

Show in the manual (page 25)
During extended use
Interrupt work to oil the blade

If cutting for long periods, interrupt work frequently to oil the cutting blade.

Show in the manual (page 25)
End of season
Thoroughly clean the device

Perform a thorough cleaning of the entire device at the end of every season before storage.

Show in the manual (page 25)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend HT 40 eM?

Yes No

Frequently Asked Questions

A

The Wolf-Garten HT 40 eM is designed to cut branches with a maximum diameter of 16 mm. For thicker branches, it is recommended to use loppers first to bring them down to size.

Is this answer helpful?

A

No, this attachment is specifically designed for compatible Wolf-Garten power handles. You must use the approved operating arm and battery pack to ensure safety and proper function.

Is this answer helpful?

A

To adjust the angle, press and hold the locking button while setting the desired position between five and ten degrees or other available settings. Release the button to lock it securely in place.

Is this answer helpful?

A

No, never use the hedge trimmer near live electrical cables. Maintain a safety distance of at least 10 meters to prevent electric shock, as the blades can conduct electricity if they contact hidden wiring.

Is this answer helpful?

A

You should spray the cutting blades with conditioning oil after every use. During extended cutting sessions, pause frequently to re-oil the blades to prevent friction and rust.

Is this answer helpful?

A

Avoid storing the trimmer near fertilizers or garden chemicals. These substances can corrode metal parts and damage the plastic components of the device over time.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Seven-position adjustable working angle for reaching difficult areas
  • Dual-safety switch system prevents accidental activation
  • Capable of cutting branches up to 16 mm thick efficiently
  • Includes impact protection rail to reduce recoil hazards
  • Modular design allows connection to various compatible power handles
VS

Disadvantages

  • Not suitable for commercial or industrial heavy-duty applications
  • Requires separate purchase of compatible power handle and battery
  • Cannot be cleaned with water, requiring manual wiping only
  • Blades must be oiled manually after every use for longevity
  • Strict storage temperature requirements to protect plastic parts
M: QW-35-FL

Product Specification

Compatible with

e-multi-star Cordless Pole BS 140eM

M: QW-35-FL

Product Description

Master Your Garden with the Wolf-Garten HT 40 eM Hedge Trimmer Attachment

Transform your outdoor space into a pristine landscape with the Wolf-Garten HT 40 eM Hedge Trimmer Attachment. This versatile tool is designed for homeowners who demand precision, safety, and efficiency in their gardening routine. Unlike standard trimmers, this attachment connects seamlessly to compatible power handles, offering a modular solution that adapts to your specific needs.

The Wolf-Garten HT 40 eM features a robust cutting mechanism capable of handling branches up to 16 mm in diameter. Its intelligent design includes a seven-position adjustable working angle, allowing you to reach difficult spots and achieve complex shapes without straining your back. Whether you are shaping a formal hedge or trimming overgrown bushes, the ability to adjust the blade angle ensures a clean cut every time.

Safety is paramount in the engineering of this device. The unit comes equipped with essential protective gear, including an impact protection rail to prevent recoil injuries and a secure protective cover for transport. The dual-switch operation system requires simultaneous engagement of two buttons to activate the motor, significantly reducing the risk of accidental starts. Always remember to wear appropriate personal protective equipment such as safety goggles, ear defenders, and sturdy gloves when operating the tool.

Maintenance is straightforward yet critical for longevity. After each use, clean the cutting blades with a dry cloth and apply a thin layer of conditioning oil to prevent rust and ensure smooth operation. Never wash the device with water, as moisture can damage the internal electronics and battery compartment. Store the attachment separately from the power handle in a cool, dry place to protect plastic components from harsh chemicals like fertilizers or fuels.

This hedge trimmer attachment is strictly intended for private garden use. It is not designed for commercial applications or public spaces. Adhering to these usage guidelines ensures optimal performance and maintains the warranty coverage provided by the manufacturer. With the Wolf-Garten HT 40 eM, you gain a reliable partner for maintaining healthy, beautiful hedges throughout the seasons.

Important Usage Notes

  • Always remove the power handle before performing any maintenance or cleaning tasks.
  • Do not attempt to cut dead wood or hard objects, as this can damage the cutting blades.
  • Ensure the battery is fully charged before starting work to guarantee maximum cutting power.
  • Keep a safe distance of at least 10 meters from overhead electrical lines to avoid electrocution risks.
  • Check local regulations regarding noise levels and permitted operating times in your area.
M: QW-35-FL

© Copyright 2026 Manual.ly