Manual.ly Logo

Wolf-Garten GS 10 eM Manual

0.0 · 0 Ratings

PDF manual · 167 Pages

English

M: QW-35-FL
page

/ 167

Loading...
9584c3cfe1d7972fdea1bd86c7e11bd8c2ac page e
Betrieb
14
DE
Grasschere mit Bedienstiel verbinden
C
Î Drücken Sie den Einrastknopf [A] am Bedienstiel
und stecken Sie den Bedienstiel in die Aufnahme
des Grasschere bis der Einrastknopf in der Auf-
nahme [B] einrastet
12
.
Achtung !
¾ Achten Sie auf die korrekte Einrastung
Hinweis
Als Zubehör ist ein optional erhältlicher
Mittelgriff für den Bedienstiel erhältlich.
Informationen und Montagehinweise nden
Sie in der Bedienungsanleitung des Be-
dienstieles.
Betrieb
Betriebszeiten
Beachten Sie bitte regionale Vorschriften. Erfra-
gen Sie die Betriebszeiten bei Ihrer örtlichen
Ordnungsbehörde.
Gerät einschalten
D
WARNUNG !
Gefahr von Verletzungen oder Sachschä-
den
¾ Halten Sie das Gerät während des
Betriebes immer mit beiden Händen fest.
Eine Hand umfasst den Handgriff, die
andere Hand umfasst den Bedienstiel
an dem ummantelten Bereich bzw. den
optional erhältlichen Mittelgriff.
¾ Achten Sie immer auf einen sicheren
Stand.
Î Entfernen Sie die Schutzabdeckung.
Î Betätigen Sie den Einschaltsperrschalter [A] am
Handgriff
1
.
Î Betätigen Sie gleichzeitig den Ein-/Ausschalter [B]
am Handgriff
2
.
Î Lassen Sie den Einschaltsperrschalter wieder los.
3 Das Gerät ist in Betrieb.
Gerät ausschalten
D
Î Lassen Sie den Ein-/Ausschalter am Handgriff los.
3 Das Gerät ist ausgeschaltet.
Hinweis
Das Schneidwerkzeug läuft nach dem
Ausschalten noch kurze Zeit nach.
Hinweis
Beim Loslassen des Ein-/Ausschalters kehrt
der Einschaltsperrschalter automatisch in
seine Ausgangsposition zurück.
Schneiden
E
Î Halten Sie das Gerät in Arbeitsstellung.
Î Führen Sie die Grasschere immer mit den Rädern
auf dem Boden.
Î Achten Sie auf einen korrekt eingestellten Arbeits-
winkel, damit das Schneidwerkzeug nicht in den
Boden schneidet.
Î Arbeiten Sie langsam und vorsichtig.
Î Schneiden Sie den Rasen nicht zu dicht am
Boden ab.
Bedienstiel mit fest verbautem Akku entfernen
F
Î Gerät ausschalten.
Î Drücken Sie den Einrastknopf [A] am Be-
dienstiel
1
.
Î Ziehen Sie den Bedienstiel aus der Aufnahme der
Grasschereneinheit [B] ganz heraus
2
.
Wartung
WARNUNG !
Gefahr von Verletzungen oder Sachschäden.
¾ Wartungs- und Reinigungsarbeiten am
Gerät dürfen nur bei stillgesetztem Motor
und stillstehendem Schneidwerkzeug
vorgenommen werden.
¾ Vor allen Arbeiten am Gerät den Be-
dienstiel, in welchem sich der fest ver-
baute Akku bendet, entfernen.
¾ Reinigen Sie das Gerät nicht mit Wasser.
¾ Reparatur- und Wartungsarbeiten sowie
den Austausch von Sicherheitselemen-
ten nur von einer qualizierten Fachkraft
oder einer Fachwerkstatt durchführen
lassen.
¾ Bei allen Arbeiten an dem Schneidmes-
ser Schutzhandschuhe tragen.
Reinigung
Î Schalten Sie das Gerät aus, warten Sie bis das
Schneidwerkzeug zum Stillstand gekommen ist
und entfernen Sie den den Bedienstiel.
Î Reinigen Sie die Grasschere, insbesondere die
Lüftungsschlitze, nach jedem Einsatz mit einem
trockenen Tuch bzw. bei starker Verschmutzung
mit einer Bürste.
Î Reinigen Sie das Schneidmesser vorsichtig nach
jedem Gebrauch.
Î Sprühen Sie das Schneidmesser nach dem Ein satz
mit Pegeöl ein, um eine lange Lebensdauer der
Grasschere zu garantieren. Verwenden Sie hierzu
möglichst umweltfreundliche Schmiermittel.
Î Ölen Sie die Grasschere nicht während des Betriebs.
Î Legen Sie die Grasschere zum Ölen auf die Seite und
tragen sie einen dünnen Öllm auf das Schneidmesser
auf.

Chat with your Wolf-Garten GS 10 eM manual using AI

Get instant AI answers from your Wolf-Garten GS 10 eM manual

Ask anything about the Wolf-Garten GS 10 eM. Answers come from this manual, with the pages they are based on.

GS 10 eM Maintenance Schedule

After every use
Clean the grass shears and ventilation slots

Use a dry cloth or brush to clean the device, especially the ventilation slots, after every use. Do not use water.

Show in the manual (page 14)
After every use
Clean and oil the cutting blade

Carefully clean the cutting blade after each use. Spray with conditioning oil to ensure long service life, using environmentally friendly lubricants.

Show in the manual (page 14)
End of season
Perform thorough cleaning before storage

Clean the device thoroughly at the end of every season before storing it in a dry, safe location inaccessible to children.

Show in the manual (page 15)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend GS 10 eM?

Yes No

Frequently Asked Questions

A

This grass cutter attachment is designed exclusively for maintaining lawn edges and small lawn areas within private gardens. It is not intended for commercial use or cutting anything other than grass.

Is this answer helpful?

A

Yes, the device features a seven-fold adjustable working angle. You can set it horizontally for standard edging or vertically for cutting flower bed borders where no edge exists.

Is this answer helpful?

A

The battery is permanently installed in the operating arm. You must only charge it using a charger approved by the manufacturer. Ensure the battery is fully charged before the first use for optimal performance.

Is this answer helpful?

A

No, never clean the device with water. Water can damage the electronics. Use a dry cloth or a brush to remove dirt from the body and ventilation slots after every use.

Is this answer helpful?

A

Always wear personal protective equipment, including safety glasses, sturdy shoes, long trousers, and hearing protection. Avoid loose clothing or jewelry that could get caught in moving parts.

Is this answer helpful?

A

Immediately switch off the motor and remove the operating arm. Excessive vibration indicates a potential issue with the cutting blade or fastening, so have the device checked by a specialist workshop.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Seven-position adjustable working angle for versatile cutting tasks
  • Battery-powered design eliminates cord restrictions
  • Sharp cutting blade ensures clean edges on lawns and flower beds
  • Includes safety features like lock-on switches and two-hand operation
  • Compact size ideal for private gardens and small lawn areas
VS

Disadvantages

  • Requires separate purchase of compatible handle and battery unit
  • Must be charged fully before first use to ensure peak performance
  • Cannot be cleaned with water due to electronic components
  • Limited to private residential use and not for commercial applications
  • Blade may require sharpening by a professional if it becomes dull
M: QW-35-FL

Product Specification

Compatible with

e-multi-star Cordless Pole BS 140eM

M: QW-35-FL

Product Description

Master Your Lawn Edges with the Wolf-Garten GS 10 eM

Achieving a perfectly manicured lawn requires precision tools that can handle tight corners and delicate edges without damaging your garden. The Wolf-Garten GS 10 eM Grass Cutter Attachment is designed specifically for private gardens, offering a versatile solution for maintaining lawn borders and small grass areas. This attachment transforms compatible Wolf-Garten handles into powerful cutting machines, allowing you to tackle overgrown edges with ease.

The GS 10 eM features a robust design that prioritizes both performance and safety. It comes equipped with a sharp cutting blade capable of handling various grass types efficiently. One of its standout features is the adjustable working angle, which offers seven different positions. This flexibility allows users to reach difficult spots, such as flower bed borders or uneven terrain, ensuring a clean cut every time. Whether you need a horizontal cut for standard edging or a vertical cut for flower beds without defined edges, this tool adapts to your needs.

Safety is paramount when operating any power tool. The manual emphasizes strict adherence to safety guidelines, including wearing protective gear like safety glasses and sturdy shoes. The device includes a lock-on switch to prevent accidental starts and requires two-handed operation for maximum control. The battery-powered system eliminates the hassle of cords, providing freedom of movement around your property. Always ensure the cutting tool has come to a complete stop before setting the device down or removing the handle.

Maintenance is straightforward but essential for longevity. After each use, clean the cutting blade and ventilation slots with a dry cloth. Applying a thin layer of oil to the blade prevents rust and ensures smooth operation. Never clean the unit with water, as moisture can damage the internal electronics. Store the attachment separately from the handle in a dry place to protect the plastic components from harsh chemicals found in fertilizers or fuels.

With its focus on user safety, ergonomic design, and efficient cutting capabilities, the Wolf-Garten GS 10 eM is an ideal choice for homeowners seeking professional results in their garden care routine.

M: QW-35-FL

© Copyright 2026 Manual.ly