Manual.ly Logo

Wagner Control Pro 350 R Manual

0.0 · 0 Ratings

PDF manual · 140 Pages

English

M: QW-35-FL
page

/ 140

Loading...
55dde378ce2baf762e670d58efebb59bc307 page 10
10
Control Pro 250 R / 350 R
DE
HEA Filter Set
Montage
Gefahr
Pistole und Hochdruckschlauch müssen drucklos sein, bevor das
Filter Set montiert/demontiert wird.
1. 1. Hochdruckschlauch von Pistole (1) trennen.Hochdruckschlauch von Pistole (1) trennen.
2. 2. Bei Bedarf Filtergehäuse (2) aufschrauben und zur Düse passenden Filter (3) Bei Bedarf Filtergehäuse (2) aufschrauben und zur Düse passenden Filter (3)
einsetzen (die konische Seite (A) muss nach oben zeigen). einsetzen (die konische Seite (A) muss nach oben zeigen).
Düse 311
Filter rot
Düse 517 / 619
Filter weiß (im Filtergehäuse vormontiert)
3. 3. Filtergehäuse (2) an Pistole (1) fest anschrauben. Filtergehäuse (2) an Pistole (1) fest anschrauben.
4. 4. Hochdruckschlauch (4) an Filtergehäuse (2) fest anschrauben. Hochdruckschlauch (4) an Filtergehäuse (2) fest anschrauben.
Reinigung
Gefahr
Pistole und Hochdruckschlauch müssen drucklos sein, bevor das
Filter Set montiert/demontiert wird.
1. 1. Filtergehäuse (2) von Schlauch (4) und Pistole (1) entfernen.Filtergehäuse (2) von Schlauch (4) und Pistole (1) entfernen.
2. 2. Filtergehäuse (2) aufschrauben und Filter (3) herausnehmen. Filtergehäuse (2) aufschrauben und Filter (3) herausnehmen.
3. 3.
Filter (3) und Filtergehäuse (2) gründlich reinigen (bei Verschleiß Filter Filter (3) und Filtergehäuse (2) gründlich reinigen (bei Verschleiß Filter
ersetzten).ersetzten).
4. 4.
Beim Wiederzusammenbau darauf achten, dass die Dichtung (5) nicht verloren Beim Wiederzusammenbau darauf achten, dass die Dichtung (5) nicht verloren
geht.geht.
Arbeitsunterbrechung
Gefahr
Befolgen Sie stets die Anleitung zur Druckentlastung, wenn Sie das Gerät ausschalten. Durch dieses Verfahren
wird der Druck aus dem Spritzschlauch und der Pistole abgelassen.
•
Schalten Sie das Gerät aus (Druckregler 0) und ziehen Sie den Netzstecker.
•
Spritzpistole in einen Plastikbeutel geben und luftdicht verschließen.
•
Farboberäche im Farbgebinde mit etwas Wasser benetzen, damit sich keine Haut bildet.
Außerbetriebnahme und Reinigung
Eine sachgemäße Reinigung ist Voraussetzung für den einwandfreien Betrieb des Farbauftragsgerätes. Bei fehlender oder
unsachgemäßer Reinigung werden keine Garantieansprüche übernommen.
Gefahr
Verwenden Sie zur Reinigung keine brennbaren Materialien / Nitroverdünnung.
i
Reinigen Sie das Gerät immer direkt nach Arbeitsende.
Eingetrockneter Beschichtungssto erschwert die Reinigung.Eingetrockneter Beschichtungssto erschwert die Reinigung.
1. 1. Führen Sie eine Druckentlastung durch.
2. Sichern Sie die Spritzpistole.
3. Entfernen Sie den Düsenhalter von der Spritzpistole. (Abb. 19)
4. Stellen Sie Ansaugschlauch und Rücklaueitung in einen Behälter mit Wasser bzw. einer für das verwendete Material
geeigneten Reinigungslösung.
5. Halten Sie die Spritzpistole an den Rand des Farbeimers. (Abb. 20)
Gefahr
Erden Sie die Pistole beim Spülen von Lösungsmitteln über einen Metallbehälter.
6. Entsichern Sie die Pistole und ziehen Sie den Abzugsbügel.
3
1
2
4
A
5

Chat with your Wagner Control Pro 350 R manual using AI

Get instant AI answers from your Wagner Control Pro 350 R manual

Ask anything about the Wagner Control Pro 350 R. Answers come from this manual, with the pages they are based on.

Control Pro 350 R Maintenance Schedule

Before every use
Check high-pressure hose for damage

Thoroughly check the high-pressure hose before each use. Replace immediately if damaged to prevent injection injuries.

Show in the manual (page 10)
Regularly
Check and clean filters

Check and clean gun and inlet/suction filters regularly to prevent dry running and pump damage.

Show in the manual (page 12)
After every job
Clean device thoroughly

Clean the device immediately after finishing work to prevent dried coating material from clogging parts.

Show in the manual (page 16)
After cleaning
Preserve pump with oil

Immerse inlet valve in conservation agent (e.g., household oil) and run pump briefly to preserve it for next use.

Show in the manual (page 17)
Every 6 years
Replace high-pressure hose

Wagner recommends replacing the high-pressure hose after 6 years due to increased risk of damage from aging.

Show in the manual (page 11)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Control Pro 350 R?

Yes No

Frequently Asked Questions

A

Suitable materials include latex paints, dispersions, stains, varnishes, and primers. Do not use abrasive materials, facade paints, or flammable liquids containing acetone.

Is this answer helpful?

A

The max spray pressure is 110 bar or 11 MPa. Ensure the hose and gun are rated for this pressure to avoid failure.

Is this answer helpful?

A

The standard warranty is 36 months. It extends to 48 months if registered online within 28 days of purchase.

Is this answer helpful?

A

Yes, it is suitable for interior and exterior objects like fences and gates. Ensure wind direction does not blow vapors to the unit.

Is this answer helpful?

A

Wear safety goggles, respiratory protection, ear protection, and gloves. Always ensure the device is properly grounded.

Is this answer helpful?

A

Rotate the nozzle tip to point backwards and relieve pressure. Trigger the gun over scrap wood to clear the obstruction.

Is this answer helpful?

A

The 350 R model includes a 15 meter hose. The max hose length can be extended to 30 meters for larger jobs.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • High pressure output up to 110 bar for efficient coverage
  • Includes comprehensive warranty period with registration extension
  • Compatible with various materials like latex and stains
  • Safety features include thermal release and trigger locks
  • HEA filter set minimizes nozzle blockages effectively
VS

Disadvantages

  • Weight of 7.7 kg may be heavy for extended use
  • Noise level of 83 dB requires hearing protection
  • Cannot be used with flammable liquids or solvents
  • Requires proper grounding for electrical safety compliance
  • Cleanup process is detailed and time-consuming
M: QW-35-FL

Product Specification

Power

600W

Flow Rate

50.72 fl oz/min

Paint Cup

No

Features

Airless

Weight

16.98 lbs

Package Contents

2 Nozzle Sets, Hose (49.21 ft)

M: QW-35-FL

Product Description

Transform Your Painting Projects with Professional Results

Achieving a flawless finish on walls and large surfaces requires precision and power. The Wagner Airless Sprayer Control Pro 350 R Electric Paint Spray System Manual guides users through mastering this versatile tool. This airless sprayer is designed for homeowners and professionals alike who demand efficiency without sacrificing quality. Whether you are refreshing interior living spaces or coating exterior fences, this system delivers consistent coverage. The setup process involves assembling the carry handle, hoses, and safety components as detailed in the documentation.

Key Features and Performance

This machine utilizes a robust piston pump to generate high-pressure output. Users can achieve a maximum spray pressure of 110 bar. The flow rate reaches up to 1.5 liters per minute, allowing you to cover large areas rapidly. It is compatible with various coating substances including latex paints, wood stains, and varnishes. The system includes an automatic pressure regulator to adjust output based on material viscosity. Specialized nozzles ensure optimal application for both thin and thick materials. The high-pressure hose extends 15 meters providing ample reach for most tasks without moving the pump.

Safety and Operational Guidelines

Safety is a paramount concern with high-pressure equipment. The manual emphasizes strict adherence to grounding protocols to prevent electrostatic charging. Users must never point the spray gun at themselves or others due to injection hazards. Working in well-ventilated areas is crucial to avoid inhaling mist. The device features a thermal release switch that cuts power if the motor overheats. It is also vital to release pressure before performing any maintenance tasks. You cannot use this unit for flammable liquids or substances that generate sparks. Electrical safety requires a residual current device.

Maintenance and Longevity

Regular care ensures the device remains functional for years. The HEA Filter Set helps minimize nozzle blockages during operation. After use, thorough cleaning with water or approved solvents is required to prevent dried residue. Filters should be inspected and cleaned regularly. The inlet valve may need lubrication to maintain performance. Proper storage prevents damage to hoses and connections during downtime. Do not use high-pressure washers to clean the main unit body to avoid short circuits.

Warranty and Support

Wagner provides a 3 plus 1 year guarantee for registered products. This includes 36 months plus an additional 12 months upon online registration within 28 days. Service centers offer support for troubleshooting. Following the instructions in the Wagner Airless Sprayer Control Pro 350 R Electric Paint Spray System Manual helps maintain warranty validity. By respecting guidelines, you ensure reliable performance and safety.

Required Tools and Setup

Assembly requires basic wrenches including sizes 13, 16, 17 and 20 mm. An Allen key is necessary for components. Prepare masking material to cover areas. The noise level is approximately 83 decibels requiring ear protection.

Final Thoughts

Investing in quality tools pays off with time savings. This sprayer is a significant upgrade from rollers. Always follow the manual to avoid voiding coverage.

M: QW-35-FL

© Copyright 2026 Manual.ly