Manual.ly Logo

Vitavia Meridian 2 6700 Manual

0.0 · 0 Ratings

PDF manual · 36 Pages

English

M: QW-35-FL
page

/ 36

Loading...
e4d73221eaa17a66bce40113f4fb2876693a page 4
4
SITE SELECTION
Always try to select a sunny location, sheltered
from the wind as much as possible.
IMPORTANT
Before assembling your new greenhouse,
please check that all parts in the provided list
are included. Please take each bundle out of
the packaging in order to identify the parts
better.
It is important that the opened bundles do not
get mixed with one another.
If something is missing please contact your
retailer.
Nuts (1002) - Max. tightening torque 3Nm.
NECESSARY TOOLS
Screw drivers (Normal and Crosshead PH2),
10 mm socket spanner or wrench, 10 mm
combination spanner, knife, measuring stick,
spirit level, Accu-drill with adjustable torque.
MAINTENANCE
The greenhouse should be thoroughly washed
with a gentle detergent occasionally. Please
check that the detergent used does not react
aggressively with aluminium or the glass xing
clips.
Ensure that the upper and lower door tracks
are cleaned regularly to avoid a build-up of
debris.
0. BASE
Important! The base must be exactly square
and level. A zinc-coated steel base is available
as an accessory for all greenhouse models.
(Attention! Only when the greenhouse has to
be located in a very windy and unprotected
location: Drill through both the prole at the
base of the greenhouse and the steel base,
and connect them with nuts and bolts.)
If you would rather construct your own stone
or concrete foundation, please follow the
dimensions specied in diagram 0. Treated
wooden beams at least 18 mm high and not
more than 32 mm wide should be positioned
between the stone/concrete foundation and
the aluminium frame, and connected to the
foundation with 50 mm long bolts (not pro-
vided).
Foundations must extend down below the frost
level.
Diagrams in a single frame show the view
from inside the greenhouse. Those enclo-
sed in a double frame show the view from
outside the greenhouse.
1. SIDE ELEMENTS
Lay all of the parts on the oor and connect
them loosely.
At this stage it is necessary with each vertical
aluminium bar (3032) to include an extra
connecting bolt, to later connect corner braces
(2056) (1.5). On the outside bars (3032) in-
clude one additional extra bolt, to also connect
cross braces (3095) (1.2).
Loosely connect the corner plate (1092) (1.1).
In step 4 the corner plate bolts must also be
connected to the gable ends.
2. PLAIN GABLE END
Lay all of the parts on the oor and connect
them loosely.
Include two extra connecting bolts in the
vertical bars (3041 and 3042) to connect the
cross braces (2.2) and (2.6). In the vertical bar
(3101) please include only one extra bolt.
3. DOOR GABLE END
Lay all of the parts on the oor and connect
them loosely.
The door runner bars (1347) will be connected
to the horizontal bar (2048). Connect these
loosely from the outside with three nuts and
bolts.
Connect (5001) and (5002) as shown in (3.10)
(3.11) with a nut and bolt.
As in step 2, please include two extra bolts in
both vertical bars (3041) and (3042) (3.3).
4A. CONNECTING THE SEPARATE
ELEMENTS
Bolt the side elements to the end elements
(4.1) & (4.2).
Loosely connect the corner plate (1092) above
the eaves (4.3).
Assemble the ridge bar and then the corner
plates (1092) on the gable ends (4.4/4.5).
Connect the door runner supports (2043) to
the door runner bars (1347) using washer
(6060) (4.1) and to the gable end using bolt
(4201) and spacer (1310) (4.3) (4.6).
4B. CONNECTING THE SEPARATE
ELEMENTS
Connect the roof glazing bars (2055) between
the eaves (4.7) and the ridge bar (4.8). Insert
extra bolts into each glazing bar depending on
which house you have bought. The number is
indicated in a circle on each bar and to be
read beginning from both ends.
The corner braces (2056) (4.7), the roof
braces (3057) (4.9) and the cross braces
(2033) (4.11) (4.12) (4.13) can now be con-
nected.
Now position your greenhouse on the pre-
pared base/foundation and connect loosely.
Adjust the greenhouse until it is completely
square and tighten all bolts.
Please do not over tighten. (max. 3Nm)
Press the end protectors (1017) and (1018)
onto the prole ends (4.10).
5R. and 5L. DOOR
Attention: Do not stand the assembled
door on the door gliders (1014) to avoid
Assembly Instructions
Safety Warning
EN
1. PLEASE READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE ASSEMBLING YOUR GREENHOUSE.
2. Sharp edges and corners can cause injury. Always wear protective glasses, gloves, shoes and headgear when handling the aluminium proles, glass and
polycarbonate sheets. Broken glass is a safety hazard – always clear up immediately and dispose of with care.
3. The product you have purchased is intended only for growing plants and should only be used for this purpose. When used for other purposes we will take
no responsibility.
4. It is recommended that this greenhouse is assembled by two people.
5. Should you encounter difculties constructing this house, or in tting the glass or polycarbonate sheets, please contact your retailer
– do not use force!
6. The greenhouse must always be anchored.
012.01.1807

Chat with your Vitavia Meridian 2 6700 manual using AI

Get instant AI answers from your Vitavia Meridian 2 6700 manual

Ask anything about the Vitavia Meridian 2 6700. Answers come from this manual, with the pages they are based on.

Meridian 2 6700 Maintenance Schedule

Occasionally
Wash the greenhouse

Thoroughly wash with a gentle detergent. Ensure the detergent does not react aggressively with aluminium or glass fixing clips.

Regularly
Clean door tracks

Ensure that the upper and lower door tracks are cleaned regularly to avoid a build-up of debris.

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Meridian 2 6700?

Yes No

Frequently Asked Questions

A

You will need screwdrivers (flat and crosshead PH2), a 10 mm socket spanner or wrench, a combination spanner, a knife, a measuring stick, a spirit level, and an accu-drill with adjustable torque.

Is this answer helpful?

A

Yes, but you must follow the specific instruction sheet included with the polycarbonate sheets rather than the standard glass glazing guide.

Is this answer helpful?

A

Yes, the greenhouse must always be anchored to the ground to ensure stability, especially in windy conditions.

Is this answer helpful?

A

The maximum tightening torque for the nuts is 3Nm. Overtightening can damage the aluminum profiles or threads.

Is this answer helpful?

A

Clean the upper and lower door tracks regularly to prevent debris buildup, ensuring the door slides freely without obstruction.

Is this answer helpful?

A

If any parts are missing after unpacking, please contact your retailer immediately for replacement before beginning assembly.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Durable aluminum frame resistant to rust and corrosion
  • 4mm glazing provides excellent thermal insulation for plants
  • Smooth sliding door system allows easy access to the interior
  • Modular design available in multiple sizes to fit various garden layouts
  • Comprehensive assembly instructions included in multiple languages
VS

Disadvantages

  • Requires a perfectly level and square foundation for proper alignment
  • Silicone sealing material is not included in the standard package
  • Heavy snow load requires manual removal to prevent structural stress
  • Assembly must be performed by at least two people for safety
  • Glass panels require careful handling and specific safety precautions
M: QW-35-FL

Product Specification

Glazing

Polycarbonate 4mm (hollow chamber panels)

Frame

Aluminum

Color

silver

Area

72.05 sq ft

Features

2 roof windows, 1 hinged window, gutter, lockable

Door

Double sliding door

Dimensions (LxWxH)

8465x8432x7612 mm

M: QW-35-FL

Product Description

Discover the Vitavia Meridian 2 6700 HKP 4mm Greenhouse alu

Creating a sanctuary for your plants has never been easier with the Vitavia Meridian 2 6700 HKP 4mm Greenhouse alu. This robust structure is designed to provide the perfect environment for gardening enthusiasts who demand durability and style. The greenhouse features a sleek aluminum frame that ensures longevity while resisting corrosion from the elements. With 4mm thick glazing, this model offers excellent insulation properties, keeping your plants warm during cooler nights and protecting them from harsh winds.

Assembly of the Vitavia Meridian 2 is straightforward when you follow the detailed manual provided. The kit includes all necessary components for sizes 6700, 8300, 9900, and 11500, allowing you to customize the footprint to fit your garden space. The design incorporates sliding doors that glide smoothly on dedicated tracks, making access to your plants effortless even in tight spaces. Safety is a priority, so the instructions emphasize wearing protective gear during assembly and handling glass or polycarbonate sheets with care.

Maintenance of your new greenhouse is minimal yet effective. Regular cleaning with a gentle detergent keeps the aluminum frame and glass panels looking pristine without damaging the materials. It is crucial to keep the door tracks clear of debris to ensure the sliding mechanism remains friction-free. For those living in areas with heavy snowfall, the sturdy construction supports roof loads, though clearing snow periodically is recommended to prevent stress on the structure.

The Vitavia Meridian 2 6700 HKP 4mm Greenhouse alu is more than just a shelter; it is a tool for growing. Whether you are cultivating exotic flowers or starting seeds for the spring harvest, this greenhouse provides the stability and climate control needed for success. Remember to anchor the unit securely to the ground to withstand strong gusts of wind. By following the site selection guidelines and choosing a sunny, sheltered location, you maximize the potential of your indoor garden.

Important Notes

  • Always check the part list before starting assembly to ensure nothing is missing.
  • Do not overtighten bolts; a maximum torque of 3Nm is recommended to avoid damaging threads.
  • Seal edges with neutral silicone if you desire a completely weather-tight seal, though this is optional.
  • Store the manual safely for future reference regarding replacement parts.
M: QW-35-FL

© Copyright 2026 Manual.ly