Manual.ly Logo

Vitavia Jupiter 6700 Manual

0.0 · 0 Ratings

PDF manual · 36 Pages

English

M: QW-35-FL
page

/ 36

Loading...
c7974e4e24c95b1ebf0aa104c43ebd3f69c6 page 4
4
SICHERHEITSVORKEHRUNGEN
SITE SELECTION
Always try to select a sunny location, sheltered
from the wind as much as possible.
IMPORTANT
Before assembling your new greenhouse,
please check that all parts in the provided list
are included. Please take each bundle out of
the packaging in order to identify the parts
better.
It is important that the opened bundles do not
get mixed with one another.
If something is missing please contact your
retailer.
Nuts (1002) - Max. tightening torque 3Nm.
NECESSARY TOOLS
Screw drivers (Normal and Crosshead PH2),
10 mm socket spanner or wrench, 10 mm
combination spanner, knife, measuring stick,
spirit level, Accu-drill with adjustable torque.
MAINTENANCE
The greenhouse should be thoroughly washed
with a gentle detergent occasionally. Please
check that the detergent used does not react
aggressively with aluminium or the glass xing
clips.
Ensure that the upper and lower door tracks
are cleaned regularly to avoid a build-up of
debris.
0. BASE
Important! The base must be exactly square
and level. A zinc-coated steel base is available
as an accessory for all greenhouse models.
(Attention! Only when the greenhouse has to
be located in a very windy and unprotected
location: Drill through both the prole at the
base of the greenhouse and the steel base,
and connect them with nuts and bolts.)
If you would rather construct your own stone
or concrete foundation, please follow the
dimensions specied in diagram 0. Treated
wooden beams at least 18 mm high and not
more than 32 mm wide should be positioned
between the stone/concrete foundation and
the aluminium frame, and connected to the
foundation with 50 mm long bolts (not pro-
vided).
Foundations must extend down below the frost
level.
Diagrams in a single frame show the view
from inside the greenhouse. Those enclo-
sed in a double frame show the view from
outside the greenhouse.
1. SIDE ELEMENTS
Lay all of the parts on the oor and connect
them loosely.
At this stage it is necessary with each vertical
aluminium bar (2055) to include an extra
connecting bolt, to later connect corner braces
(2056) (1.5). On the outside bars (2055) in-
clude one additional extra bolt, to also connect
cross braces (2033) (1.2).
Loosely connect the corner plate (1092) (1.1).
In step 4 the corner plate bolts must also be
connected to the gable ends.
2. PLAIN GABLE END
Lay all of the parts on the oor and connect
them loosely.
Include two extra connecting bolts in the
vertical bars (2041 and 2042) to connect the
cross braces (2.2) and (2.6). In the vertical bar
(2101) please include only one extra bolt.
3. DOOR GABLE END
Lay all of the parts on the oor and connect
them loosely.
The door runner bars (1347) will be connected
to the horizontal bar (2048). Connect each of
these loosely from the outside with three bolts
and two nuts.
Connect (5001) and (5002) as shown in (3.10)
(3.11) with a nut.
As in step 2, please include two extra bolts in
both vertical bars (2041) and (2042) (3.3).
4A. CONNECTING THE SEPARATE
ELEMENTS
Bolt the side elements to the end elements
(4.1) & (4.2).
Loosely connect the corner plate (1092) above
the eaves (4.3).
Assemble the ridge bar and then the corner
plates (1092) on the gable ends (4.4/4.5).
Connect the door runner supports (2043) to
the door runner bars (1347) using washer
(6060) (4.1) and to the gable end using bolt
(4201) and spacer (1310) (4.3) (4.6).
4B. CONNECTING THE SEPARATE
ELEMENTS
Connect the roof glazing bars (2055) between
the eaves (4.7) and the ridge bar (4.8). Insert
extra bolts into each glazing bar depending on
which house you have bought. The number is
indicated in a circle on each bar and to be
read beginning from both ends.
The corner braces (2056) (4.7), the roof
braces (2057) (4.9) and the cross braces
(2033) (4.11) (4.12) (4.13) can now be con-
nected.
Now position your greenhouse on the pre-
pared base/foundation and connect loosely.
Please do not over tighten. (max. 3Nm)
Adjust the greenhouse until it is completely
square and tighten all bolts.
Please do not over tighten.
Press the end protectors (1017) and (1018)
onto the prole ends (4.10).
5L and 5R. DOORS
Attention: Do not stand the assembled
001.01.1806
1. PLEASE READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE ASSEMBLING YOUR GREENHOUSE.
2. Sharp edges and corners can cause injury. Always wear protective glasses, gloves, shoes and headgear when handling the aluminium proles, glass and
polycarbonate sheets. Broken glass is a safety hazard – always clear up immediately and dispose of with care.
3. The product you have purchased is intended only for growing plants and should only be used for this purpose. When used for other purposes we will take
no responsibility.
4. It is recommended that this greenhouse is assembled by two people.
5. Should you encounter difculties constructing this house, or in tting the glass or polycarbonate sheets, please contact your retailer
– do not use force!
6. The greenhouse must always be anchored.
Assembly Instructions
Safety Warning
EN

Chat with your Vitavia Jupiter 6700 manual using AI

Get instant AI answers from your Vitavia Jupiter 6700 manual

Ask anything about the Vitavia Jupiter 6700. Answers come from this manual, with the pages they are based on.

Jupiter 6700 Maintenance Schedule

Occasionally
Wash the greenhouse with gentle detergent

Thoroughly wash the greenhouse occasionally using a gentle detergent that does not react aggressively with aluminium or glass fixing clips.

Regularly
Clean door tracks to remove debris

Ensure that the upper and lower door tracks are cleaned regularly to avoid a build-up of debris.

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Jupiter 6700?

Yes No

Frequently Asked Questions

A

You will need screwdrivers (flat and crosshead PH2), a 10 mm socket wrench or combination spanner, a knife, a measuring stick, a spirit level, and an accu-drill with adjustable torque set to a maximum of 3Nm.

Is this answer helpful?

A

Yes, but you must follow the specific instruction sheet included with the polycarbonate panels rather than the standard glass glazing guide found in the main manual.

Is this answer helpful?

A

Yes, a solid foundation is mandatory. You can use a zinc-coated steel base available as an accessory or construct your own stone or concrete foundation that extends below the frost level.

Is this answer helpful?

A

Clean the upper and lower door tracks regularly using a gentle detergent to prevent debris buildup, which ensures the sliding doors move freely without sticking.

Is this answer helpful?

A

If any parts from the provided list are missing, please contact your retailer immediately before attempting to assemble the greenhouse.

Is this answer helpful?

A

Yes, the greenhouse must always be anchored. In very windy locations, drill through the base profile and the steel foundation to connect them securely with nuts and bolts.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • High-quality aluminum frame ensures excellent durability and resistance to rust
  • Sliding door design saves space and provides convenient access to the interior
  • Large roof vent allows for effective temperature control and air circulation
  • Clear glass glazing maximizes natural light penetration for plant growth
  • Comprehensive assembly manual included with diagrams for multiple languages
VS

Disadvantages

  • Requires a perfectly level and square foundation for proper installation
  • Glass glazing can be heavy and requires careful handling during assembly
  • Maximum tightening torque is limited to 3Nm, requiring precise tool usage
  • Silicone sealant for weatherproofing must be purchased separately
  • Assembly is best performed by two people for safety and efficiency
M: QW-35-FL

Product Specification

Glazing

Polycarbonate 4mm (hollow chamber sheets)

Frame

Aluminum

Color

Silver

Area

72.09 sq ft

Features

2 roof windows, tilt-and-turn window, gutter, lockable

Door

Double sliding door

Dimensions (LxWxH)

8465x8432x8136 mm

M: QW-35-FL

Product Description

Vitavia Jupiter 6700 HKP 4mm Greenhouse alu Manual

The Vitavia Jupiter 6700 is a robust and elegant aluminum greenhouse designed for serious gardeners who value durability and natural light. This model features a sleek design with clear or frosted glass glazing, ensuring your plants receive the optimal sunlight they need to thrive throughout the growing season. The structure is built from high-quality aluminum profiles that resist corrosion and provide long-lasting strength against the elements.

Assembly of the Jupiter 6700 is straightforward when following the detailed instructions provided. The kit includes all necessary hardware, including M6 bolts and specialized clips for securing the glass panes. Before starting, ensure you have a flat, level foundation ready, as this is critical for the structural integrity of the unit. The manual guides you through laying out side elements, assembling gable ends, and connecting the roof sections. It emphasizes the importance of not over-tightening bolts during the initial phase to allow for adjustments before finalizing the squareness of the frame.

A standout feature of this greenhouse is its sliding door system, which allows for easy access without taking up extra space outside the structure. The roof vent provides essential ventilation during hot summer days, preventing overheating and promoting healthy air circulation for your crops. Maintenance is minimal; simply wash the exterior occasionally with mild detergent and keep the door tracks clean to ensure smooth operation. For added protection in windy areas, anchoring the base to a steel foundation is recommended. Always remember to close doors and vents during storms to protect the glass and frame from damage.

Whether you are an experienced grower or a beginner looking to expand your gardening space, the Vitavia Jupiter 6700 offers a perfect blend of functionality and aesthetic appeal. Its spacious interior accommodates various planting arrangements, while the durable construction ensures it will serve you well for years to come.

M: QW-35-FL

© Copyright 2026 Manual.ly