Manual.ly Logo

Velleman SOL Series Manual

0.0 · 0 Ratings

PDF manual · 33 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 33

Loading...
942d5d2f838ea635c5f73ace6e2b321f44b3 page 3
SOL50F/SOL100F
V. 01 – 27/04/2018 3 ©Velleman nv
USER MANUAL
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle
could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal
waste; it should be taken to a specialized company for recycling. This device should be
returned to your distributor or to a local recycling service. Respect the local environmental
rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Perel! Please read the manual thoroughly before bringing this device
into service. If the device was damaged in transit, do not install or use it and contact your
dealer.
2. Safety Instructions
Caution, risk of electric shock.
Photovoltaic modules generate DC current when exposed to sunlight or other light sources.
Although a single module produces only low voltage and current, shocks and burns are still a
potential hazard. The shock hazard increases as modules are connected in series. Cover the
whole front of the module with a dense opaque material such as cardboard when installing and
handling the module. Work under dry conditions only.
Make sure you fully understand the instructions before installing the module. Contact a
qualified technician if in doubt.
This device can be used by children aged from 8 years and above, and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning the use of the device in a safe way and understand
the hazards involved. Children shall not play with the device. Cleaning and user maintenance
shall not be made by children without supervision.
Never disconnect a module under load.
Install the module horizontally or vertically with the connection box at the top. The solar
module should be facing south at an angle of 0-20°. Bear in mind that if the solar module is
cast in shadow, its power output will drop considerably. Choose a location for the module with
as little shade as possible.
Do not use sharp metal tools or any other tools that can scratch the surface of the module.
3. General Guidelines
Refer to the Velleman
®
Service and Quality Warranty on the last pages of this manual.
All modifications of the device are forbidden for safety reasons. Damage caused by user
modifications to the device is not covered by the warranty.

Chat with your Velleman SOL Series manual using AI

Get instant AI answers from your Velleman SOL Series manual

Ask anything about the Velleman SOL Series. Answers come from this manual, with the pages they are based on.

SOL Series Maintenance Schedule

Periodically
Clean the solar module

Keep the appliance clean. In a marine environment, rinse often with fresh water to avoid salt build-up.

Periodically
Check electrical connections and wires

Periodically check electrical connections and wires for integrity.

Periodically
Check mounting and securing

Periodically check mounting and securing of the module.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend SOL Series?

Yes No

Frequently Asked Questions

A

The solar module should be facing south at an angle between zero and twenty degrees. Choose a location with as little shade as possible because shadow significantly drops power output.

Is this answer helpful?

A

Work under dry conditions only and cover the whole front with dense opaque material like cardboard. Never disconnect a module under load to avoid electrical shock hazards. Contact a qualified technician if in doubt about installation.

Is this answer helpful?

A

Coat the wires and terminal posts with Vaseline to protect them from corrosion. If mounted in a coastal area, protect the installation from moisture to prevent saltwater corrosion.

Is this answer helpful?

A

Yes, all consumer products are subject to a 24-month warranty on production flaws from the original date of purchase. Modifications by the user void the warranty and damage is not covered.

Is this answer helpful?

A

The device can be used by children aged from 8 years and above if supervised. Cleaning and maintenance shall not be made by children without supervision to ensure safety.

Is this answer helpful?

A

If the device was damaged in transit, do not install or use it. Instead, contact your dealer immediately and keep the packaging for inspection.

Is this answer helpful?

A

Keep the appliance clean and verify electrical connections periodically. In a marine environment, rinse often with fresh water to avoid salt build-up and ensure longevity.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • Multi-crystalline silicon cells offer excellent durability and consistent energy output in various weather conditions.
  • Easy parallel and series connection options provide flexibility for scaling your solar power system easily.
  • UV-resistant cables are recommended to prevent degradation and extend the lifespan of the electrical connections.
  • Clear safety instructions help prevent shock hazards during installation and handling of the modules.
  • Operating temperature range withstands extreme climates from minus forty to plus eighty-five degrees Celsius effectively.
VS

Disadvantages

  • The charge controller is not included in the package so you must purchase it separately for battery connection.
  • Corrosion protection is required for marine environments which means extra maintenance and Vaseline application on terminals.
  • Unauthorized modifications to the device are forbidden as they void the warranty and manufacturer coverage completely.
  • High surface area requires careful site selection to minimize shadowing and ensure maximum power efficiency output.
  • Units must be returned to specialized recycling companies and not disposed of in standard municipal waste bins.
M: qwen/qwen3.5-flash-20260224

Product Specification

Note

Prices include partially 0% VAT rates for AT and DE

Module Count

1

Technology

Polycrystalline

Rated Voltage (Vmp)

17.60V (STC)

Temperature Coefficient

STC, +0.04%/°F (alpha Isc), -0.22%/°F (beta Voc), -0.28%/°F (gamma Pmax)

Operating Temperature

-40°F to +185°F

M: qwen/qwen3.5-flash-20260224

Product Description

Introduction to Solar Energy Solutions

Discover the power of renewable energy with high quality panels designed for efficiency and longevity. When you look for reliable guidance on usage, the Velleman SOL Manual is an essential companion for users. This resource ensures you understand how to maximize performance while maintaining safety standards. The devices are built for outdoor durability and consistent output in various weather conditions across different regions. Many users appreciate the detailed setup steps provided within the information found online.

Safety First Approach

Always prioritize personal safety during installation and handling procedures. The photovoltaic modules generate direct current when exposed to sunlight or other light sources. To prevent accidents, cover the surface with opaque material while working on the frame. Ensure the connection box remains dry and tightly sealed against moisture. Work only in dry conditions to avoid electrical risks and shock hazards. If you have doubts about wiring or mounting, consult a qualified technician before proceeding with the project.

Installation and Setup

Position the panel facing south with an angle between zero and twenty degrees for optimal exposure. Shadows significantly reduce power output, so choose a location with minimal obstruction from trees or buildings. Connect the negative pole to the negative terminal on the charge controller and match the positive poles accordingly for proper flow. Use UV-resistant cables with a suitable cross-section to maintain system integrity over time. Applying Vaseline protects terminals from corrosion over time in humid climates.

Maintenance Tips

Regular cleaning ensures optimal performance throughout the equipment lifetime and keeps efficiency high. In marine environments, rinse with fresh water frequently to remove salt buildup that causes damage. Check mounting hardware and electrical connections periodically to ensure securing is tight. Keep the unit clear of debris that might block sunlight or trap moisture inside the frame. Do not attempt unauthorized modifications as this voids coverage from the manufacturer.

Note: Keep this information for future reference regarding care and operation protocols.

Technical Considerations

Each unit features multi-crystalline silicon cells engineered for longevity and efficiency. The system voltage supports robust connectivity between multiple units in series or parallel configurations. Verify dimensions and weight during transport planning to ensure stability. The operating temperature range withstands extreme climates effectively without degradation. Always use original accessories for best results and safety compliance. Recycling is required at end of life to respect environmental rules.

Warranty and Support

A comprehensive warranty covers production flaws for a specific period from purchase. Contact the distributor if defects appear after the standard coverage period expires. Repairs must be handled through authorized channels to maintain validity. This ensures quality remains consistent throughout the lifespan of the energy system. Customer support is available via their official channels for additional assistance.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly