Velleman Perel CH0005 Manual
PDF manual · 40 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Velleman Perel CH0005 manual using AI
Get instant AI answers from your Velleman Perel CH0005 manual
Ask anything about the Velleman Perel CH0005. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend Perel CH0005?
Yes NoFrequently Asked Questions
The Velleman Perel CH0005 provides a maximum continuous heat output of 3.0 kW. Its nominal output is listed as 2.7-3.0 kW, while the indicative minimum output is 1.2 kW.
Is this answer helpful?
Yes. The fan can be switched on without selecting a heat setting, allowing the unit to blow cool air. This can be useful when air circulation is wanted without additional warmth.
Is this answer helpful?
Turn the thermostat fully clockwise, select the desired heat setting, and allow the room to warm. When the preferred temperature is reached, turn the thermostat left until the heater switches off. It will then cycle automatically to maintain that setting.
Is this answer helpful?
It may have reached the selected temperature or activated its overheating protection. Check that ventilation openings are unobstructed, unplug the heater, and let it cool for 30 minutes before restarting. Seek dealer support if shutdowns continue.
Is this answer helpful?
It is for indoor household use in well-insulated spaces or for occasional heating. Place it upright on a flat, dry, stable, non-slip surface and keep it at least 0.5 m away from furniture and other objects.
Is this answer helpful?
No. Extension leads and multi-plug adapters are not advised because they can create overload, overheating, or fire risks. Do not use a timer, programmer, remote-control switch, or other device that could activate the heater automatically.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Delivers adjustable heating from an indicative 1.2 kW minimum output up to 3.0 kW maximum continuous output.
- Mechanical thermostat automatically cycles heating on and off to help maintain the selected room temperature.
- Optional fan supports faster warm-air circulation and can run without heat for cool-air airflow.
- Built-in overheating protection automatically shuts the heater down if excessive temperature is detected.
- Simple manual controls and upright floor placement make it easy to operate in suitable indoor spaces.
Disadvantages
- Designed only for well-insulated spaces or occasional use, limiting its suitability as a primary heating source.
- High 2700-3000 W consumption may require careful consideration of household electrical load.
- No electronic thermostat, timer, remote control, open-window detection, or presence sensing.
- Must be kept at least 0.5 m from furniture and objects, which can restrict placement in compact rooms.
- Not suitable for bathrooms, shower areas, pool surroundings, or locations near flammable materials.
Product Specification
Power
3 kW (230 V)
Color
white, black
Heating capacity
up to 2,649 ft3
Temperature settings
3 heating levels (1,200/1,800/3,000 W)
Features
carry handle, overheat protection, thermostat control
Protection rating
IP20
Mounting type
freestanding
Dimensions
30.51 x 17.72 x 6.77 in (W x H x D)
Weight
9.26 lb
Product Description
Velleman Perel CH0005 Convector Heater - Read, Download & Print Free
The Velleman Perel CH0005 Convector Heater is a practical indoor heating solution designed for well-insulated rooms and occasional use. With a maximum continuous heat output of 3.0 kW, it offers fast, flexible warmth for living areas, home offices, bedrooms, workshops, or other domestic spaces where extra heat is needed. Its straightforward controls make it suitable for users who prefer direct, manual adjustment rather than complicated digital settings.
Adjustable Heat for Everyday Comfort
The heater operates from a 220-240 V, 50/60 Hz mains supply and has a power consumption range of 2700-3000 W. Two heat-setting buttons allow users to select a lower output or combine both settings for stronger heating. The indicative minimum heat output is 1.2 kW, providing a useful option when full power is unnecessary.
A mechanical thermostat helps maintain a chosen room temperature. Start by turning the thermostat fully clockwise, choose the desired heat setting, and then turn the dial back once the room feels comfortable. The heater will cycle on and off automatically to help keep the temperature steady. This simple approach supports convenient heating without requiring constant manual attention.
Fan Assistance and Simple Placement
For quicker heat circulation, the CH0005 includes a fan button. Activating the fan helps distribute warm air around the room more rapidly. It can also be used without heating to provide a flow of cool air, adding seasonal versatility beyond colder months.
The unit must be installed upright on its supplied feet, using two screws for each foot. Position it on a flat, dry, stable, non-slip surface and leave at least 0.5 m of clearance from furniture and other objects. These placement requirements help support safe airflow and effective operation.
Built-In Safety Considerations
An overheating protection system automatically switches the heater off if it becomes too hot. If this occurs, disconnect it from the mains and allow it to cool for 30 minutes before restarting. Keep air intakes clear and never cover the appliance. Its surfaces can become very hot during use, so extra care is essential around children and vulnerable people.
The heater is intended for indoor household use only. It should not be used near baths, showers, swimming pools, flammable materials, or explosive gases. Avoid extension leads, multi-plug adapters, timers, and automatic switching devices.
Notes
- A slight smell or small amount of smoke may occur during first use and is normal.
- Switch off and unplug the heater after use.
- Clean only after it has cooled completely, using a damp cloth without harsh chemicals.
Search for 67,706 Manuals online
Type-in Brand or Model