UHU Allplast Manual
PDF manual · 11 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your UHU Allplast manual using AI
Get instant AI answers from your UHU Allplast manual
Ask anything about the UHU Allplast. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend Allplast?
Yes NoFrequently Asked Questions
It can be used indoors only if there is good ventilation or local exhaust. The adhesive contains volatile organic solvents and is classified as highly flammable. Avoid breathing vapors or aerosols, keep ignition sources away, and consider respiratory protection if ventilation is poor or exposure is prolonged.
Is this answer helpful?
Rinse cautiously with water for several minutes. If contact lenses are present and easy to remove, take them out and continue rinsing. If symptoms persist, consult a doctor. Eye irritation is a key hazard category for this product.
Is this answer helpful?
The formulation is solvent-based and contains volatile components such as acetone, ethyl acetate, and butanone. This means vapors can cause irritation and may lead to drowsiness or dizziness, so avoid inhalation and ensure airflow during use.
Is this answer helpful?
Follow chemical-handling precautions: avoid contact with eyes and skin, and wash hands after work. Solvent-resistant gloves are recommended, and goggles are advised during refilling or close handling. Work away from food and drinks.
Is this answer helpful?
Store in a cool, dry place and keep the container tightly sealed. Since it is a flammable liquid, avoid heat sources and keep it away from ignition. Keep it well sealed in appropriate receptacles.
Is this answer helpful?
No. Do not dispose with household garbage, and do not allow it to enter sewage systems. Dispose of contents and packaging according to local regulations. The recommended waste stream refers to solvent-containing adhesives and sealants.
Is this answer helpful?
The product is classified as an adhesive under UN 1133 and falls under Class 3 for flammable liquids, with Packing Group III. Use caution with ignition sources and follow applicable transport rules.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Designed as an adhesive for practical bonding tasks on plastics
- Colorless, fluid consistency supports controlled application from a tube
- Classification includes clear handling guidance (ventilation, storage, eye rinsing steps)
- Solvent system described with known components for predictable safety precautions
Disadvantages
- Highly flammable liquid and vapor, so strict ignition control is required
- Causes serious eye irritation, making eye protection essential
- May cause drowsiness or dizziness, requiring ventilation and exposure avoidance
- Not miscible with water, so cleanup requires appropriate methods and materials
Product Specification
Type
Universal adhesive
Application area
Plastic, Universal
Container
Tube
Color
transparent
Base
Acrylic ester, Polyvinyl chloride
Special features
waterproof, temperature resistant
Content
1.06 oz
Product Description
UHU Allplast Universal Plastic Glue Tube, 30g Manual
Bonding plastic parts at home or on the workshop bench calls for an adhesive that is reliable, practical, and easy to apply. The UHU Allplast Universal Plastic Glue Tube, 30g Manual is a solvent-based plastic glue designed for adhesive work, delivered in a convenient tube format for controlled application.
This formulation is a mixture of organic solvents, including acetone, ethyl acetate, and butanone. In use, that solvent character is part of what enables the adhesive system to spread and work effectively on compatible surfaces. The product appears as a colorless fluid and contains a high proportion of organic solvents, so drying and bonding depend on proper ventilation and responsible handling.
Key handling and safety highlights
For safe results, it is important to treat this adhesive as flammable and irritant-prone. The classification lists it as a highly flammable liquid and vapor. It can also cause serious eye irritation, and exposure may lead to drowsiness or dizziness. Always keep the container tightly sealed, work in good ventilation, and keep away from ignition sources and smoking.
If the adhesive gets in the eyes, rinse cautiously with water for several minutes and remove contact lenses if possible. For skin contact, wash promptly with water and soap, then rinse thoroughly. If inhaled, move to fresh air and seek medical advice if symptoms persist.
Key results (most important takeaways)
- Highly flammable liquid and vapor: keep away from heat, sparks, and open flames.
- Can irritate eyes severely: wear eye protection, especially during refilling or close work.
- Solvent exposure risk: use good ventilation and avoid breathing vapors or aerosols.
- Store cool and dry in tightly sealed packaging to maintain safe handling conditions.
- Dispose according to local regulations and do not pour into drains or sewage.
Notes for everyday use
Use protective measures typical for chemical adhesives: avoid contact with eyes and skin, remove contaminated clothing, and wash hands after use. Gloves with solvent resistance are recommended, and goggles are advised during refilling. For any spill, absorb with suitable binding materials and ensure adequate ventilation during cleanup.
In short, UHU Allplast Universal Plastic Glue Tube, 30g Manual is a versatile plastic adhesive solution paired with a formulation that demands thoughtful safety practices. When used with ventilation, eye protection, and proper storage, it is a practical choice for plastic bonding tasks.
Search for 67,706 Manuals online
Type-in Brand or Model
error_quasi
10 months ago
Will this adhesive properly bond Protex Light PVC rigid foam boards, especially if I glue the edges?
Manual.ly
10 months ago
Yes. Customers report a very good result when using it to glue Protex Light PVC rigid foam panels, including edge bonding. For best results, make sure the surfaces are clean and dry, apply an even layer along the bonding area (edges as needed), press the parts firmly into place, and let the adhesive cure according to the product instructions before further handling.