Ubiquiti NanoSwitch N-SW Manual
PDF manual · 20 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Ubiquiti NanoSwitch N-SW manual using AI
Get instant AI answers from your Ubiquiti NanoSwitch N-SW manual
Ask anything about the Ubiquiti NanoSwitch N-SW. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend NanoSwitch N-SW?
Yes NoFrequently Asked Questions
It is used to expand a network in outdoor or remote locations while passing passive PoE to compatible devices. It is a practical choice for small outdoor setups, wireless gear, and simple edge connections.
Is this answer helpful?
Not necessarily. The switch uses 24V passive PoE, so connected devices must support that voltage and style of power delivery. Always confirm compatibility before plugging in a device.
Is this answer helpful?
It has four Gigabit RJ-45 ports in total. One port is used for PoE input, and the other ports provide data and passive PoE passthrough for supported devices.
Is this answer helpful?
Yes. It supports pole and wall mounting. The package includes metal straps for pole installation, and wall mounting uses screws and the built-in keyhole slots.
Is this answer helpful?
Shielded CAT5 or better cabling is recommended for all Ethernet connections, especially outdoors. Grounding through the AC ground of the PoE source is also required for proper protection and warranty compliance.
Is this answer helpful?
Yes. Outdoor installs should use surge protection to reduce the risk of damage from electrical events. Ubiquiti recommends using Ethernet surge protectors near the switch and at the building entry point.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Compact outdoor-ready design suited for poles, walls, and exposed network points.
- Gigabit RJ-45 ports with passive 24V PoE input and passthrough support.
- Strong ESD/EMP protection and wide temperature tolerance for harsh environments.
- Simple deployment with low power use and straightforward mounting hardware.
Disadvantages
- Requires passive 24V PoE, so it will not fit every power setup.
- PoE is always active, which increases risk if connected devices are incompatible.
- Total PoE output is limited to 24W, restricting heavier deployments.
- Shielded cabling, grounding, and surge protection are essential for proper use.
Product Specification
Function
Switch, PoE Extender (1x Data/PoE PD, 3x Data/PoE)
Type
Standalone, Pole Mount (via Mounting Device)
Network Ports
4x RJ-45 (Bottom)
Speeds
4x RJ-45 (10/100/1000Base-T)
PoE
3x RJ-45 passive PoE (24V), total: 24W, 1x RJ-45 passive PoE PD (24V), PoE passthrough max. 24W, PoE Extender
Backplane
4Gb/s, 38.69Mp/s, 16k MAC Addresses
Configuration
unmanaged
Cooling
passive
Dimensions (WxHxD)
3.70x7.72x1.26in
Weight
0.60lb
Color
white
Special Features
Power supply only via PoE PD, detachable mounting brackets, extended operating range (Temperature: -22F to 158F, Humidity: 5% to 95%), firmware updates possible
Manufacturer's Warranty
one year
Product Description
Ubiquiti NanoSwitch 24 Outdoor Gigabit Switch, 4x RJ-45, PoE/PoE PD Manual
The Ubiquiti NanoSwitch is a compact outdoor switch built for simple, reliable network expansion in places where space, weather, and power availability can be challenging. With a rugged design and passive PoE pass-through support, it is especially useful for small outdoor deployments, wireless links, and remote device connections. The Ubiquiti NanoSwitch 24 Outdoor Gigabit Switch, 4x RJ-45, PoE/PoE PD Manual highlights a product that is straightforward to install while still meeting the needs of professional outdoor networking.
At its core, the NanoSwitch offers four Gigabit RJ-45 ports and supports a clean 24V passive PoE workflow. One port accepts power input, while the remaining ports can pass power to compatible devices. That makes it a practical choice for setups that need to deliver both data and power without adding bulky hardware. Its total non-blocking line rate of 4 Gbps helps keep traffic moving smoothly across connected devices.
Durability is another major strength. The enclosure is designed for outdoor use, and the unit is built to handle a wide operating temperature range. It also includes strong ESD and EMP protection, which is valuable in exposed installations. For reliability, grounding and shielded cabling are not just recommendations—they are part of proper installation and warranty conditions.
Installation flexibility is another reason this switch stands out. It can be mounted on a pole or wall, and the included straps make pole mounting easier. The design also supports optional grounding through a drain wire or direct bonding to a metal structure. For network builders working on towers, poles, or exterior walls, this can simplify deployment significantly.
The NanoSwitch is best understood as a compact, purpose-built outdoor network tool rather than a feature-heavy managed switch. It focuses on practical essentials: gigabit connectivity, passive PoE passthrough, weather-ready installation, and dependable protection. For the right environment, that balance can be a major advantage.
Notes
- Use shielded CAT5 or better cabling for outdoor runs.
- Passive PoE is always active, so verify device compatibility first.
- Total PoE output should not exceed 24W.
- Grounding and surge protection are strongly recommended for outdoor installations.
Search for 67,706 Manuals online
Type-in Brand or Model
maria_k
8 months ago
Can I power this camera with standard 48V PoE (IEEE 802.3af/at) or PoE cameras from other brands?
Manual.ly
8 months ago
This device is designed for 24V passive PoE only. It will not work with standard 48V IEEE 802.3af/at PoE unless you use an equipment setup that outputs the required 24V passive voltage. A common option is a suitable passive 24V injector such as Ubiquiti POE-24-24W-G or POE-24-30W-G. With a managed switch, it may work if the switch can be configured to provide passive 24V PoE. Many other brands that use only 48V standard PoE are not compatible.