Manual.ly Logo

Tunze Comline Manual

0.0 · 0 Ratings

PDF manual · 45 Pages

English

M: QW-35-FL
page

/ 45

Loading...
51b299c73c3670d5c3076bf77cdb57908486 page b
20 21
Leistungsregulierung
Die Comline
®
Pump 900 besitzt eine variable Leistung
von 250 bis 850 l/h, die sehr leicht am Pumpengehäuse
eingestellt werden kann:
Dazu Rasthaken (1) der forderen Filter- Blende (2)
durch gleichzeitigen Druck auf die Stellen (3) lösen und
aufmachen. Ein Stück Pumpenkabel (4) ins Gehäuse
schieben.
Pumpenregulierung (5) von + bis - drehen, ab Werk ist
die Pumpe immer auf „max“ eingestellt.
Am Pumpenausgang bendet sich ein drehbarer
Strömungswinkel (6), damit kann die Strömungsrichtung
für eine perfekte Ringströmung optimal eingestellt
werden.
Die verschiedenen Komponenten wieder
zusammensetzen. Gehäuse und Blende auf eine gerade
Fläche stellen und zusammenschieben.
Power regulation
The Comline
®
Pump 900 pump has a variable output of
250 to 850 l/h (65 - 225 US gal./h), which can be easily
adjusted on the pump housing:
For this, loosen and open the latch hook (1) of the front
lter panel (2) by simultaneously applying pressure to
the points (3). Slide a piece of pump cable (4) into the
housing.
Turn the pump regulation (5) from + to -. Ex factory the
pump is always set to “max”.
At the pump outlet, there is a rotating ow deector (6)
so that the ow direction can be optimally set to create a
perfect annular ow.
Reassemble the various components. Place the housing
and panel onto a at surface and slide them together.
Réglage de débit
La pompe Comline
®
900 possède un débit variable de
250 à 850 l/h très facile à régler en tournant le couvercle
de la pompe:
Pour cela, libérez les clips de xation (1) de la plaque
avant du ltre (2) en poussant sur les zones (3) tout en
tirant la plaque. Puis insérez un peu de câble (4) dans
le corps.
Réglez la pompe (5) de + à – par une rotation de son
couvercle, la pompe est réglée d’usine à son maximum.
La sortie de pompe comporte un déecteur de ux (6)
réglable en rotation, permettant d’ajuster le brassage
circulaire dans l’aquarium de manière optimale.
Remontez à nouveau les différents composants et
refermez la Comline
®
. Pour cela, réunissez avec une
légère pression le corps Comline
®
et la plaque avant sur
une surface parfaitement plane.

Chat with your Tunze Comline manual using AI

Get instant AI answers from your Tunze Comline manual

Ask anything about the Tunze Comline. Answers come from this manual, with the pages they are based on.

Comline Maintenance Schedule

Remind me when maintenance is due
Yearly
Clean filter housing and components

Rinse the housing thoroughly and remove algae. Perform maintenance on the pump as described in the pump section.

Show in the manual (page 11)
Yearly
Clean pump and drive unit

Remove covers and rinse the pump chamber. Soak in diluted acetic or citric acid for 24 hours if clogged by lime or debris.

Show in the manual (page 17)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend Comline?

Yes No

Frequently Asked Questions

A

Yes, the Comline MultiFilter 3168 is excellent for saltwater aquariums. It supports high flow rates up to 2,100 l/h and can be paired with the Osmolator and DOC Skimmer for reef systems.

Is this answer helpful?

A

Remove the standard filter bell and replace the intermediate plate with the included rear plate. This opens up a 1200cm³ space where you can add loose wadding, carbon, or other media.

Is this answer helpful?

A

Yes, the Comline Pump 2000 allows for easy mechanical adjustment of the flow rate using a screwdriver through the housing without needing full disassembly.

Is this answer helpful?

A

Air bubbles often occur during the initial run-in phase due to oxygen supersaturation. Reducing the pump speed slightly usually resolves this, and they typically disappear after one to two weeks.

Is this answer helpful?

A

Absolutely. The MultiFilter works perfectly in under-tank cabinets with variable water levels. You simply remove the intake tube and strainer for this setup.

Is this answer helpful?

A

For best results, wash or replace the mechanical filter cartridges every one to two weeks depending on the organic load in your aquarium.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Adjustable flow rate between 500 and 2,100 l/h suits various aquarium types
  • Converts to a universal internal filter with 1200cm³ volume for custom media
  • Compatible with TUNZE Osmolator for automatic water level regulation
  • Silicone buffers eliminate vibration noise transmitted to aquarium glass
  • Self-cleaning pump system reduces long-term maintenance requirements
VS

Disadvantages

  • Not designed for outdoor operation or swimming pools
  • Strong magnets require careful handling to avoid injury or damage
  • Initial run-in period may produce minor air bubbles in new setups
  • Requires specific spare cartridges for optimal mechanical filtration
  • Magnet holders must be installed only when the aquarium contains water
M: QW-35-FL

Product Specification

Type

Internal filter, surface extraction, skimmer

Suitability

Freshwater, saltwater, aquarium keeping, terrarium keeping

Filtration

2x filter chamber

Manufacturer warranty

two years

M: QW-35-FL

Product Description

Discover the Tunze COMLINE Aquarium Internal Filter with Surface Skimmer

The Tunze COMLINE Aquarium internal filter with surface skimmer, specifically the Comline MultiFilter 3168, represents a pinnacle of aquatic eco-engineering designed for aquariums ranging from 200 to 500 liters. This versatile mechanical quick filter is completely installation-ready and integrates the powerful Comline Pump 2000 with a Silence Magnet Holder. Its unique design allows it to filter both bottom and surface water, ensuring a pristine environment for your aquatic life.

One of the standout features of this system is its adaptability. The MultiFilter can be easily modified into a universal internal filter capable of holding any type of filter media. By simply replacing two standard parts, users gain access to a spacious 1200cm³ filter volume. This transformation allows for the use of loose micro and macro wadding, activated carbon, zeolite, or other specialized media, making it suitable as a primary filter for medium-sized tanks or an auxiliary unit for larger setups targeting specific chemical treatments.

Performance control is effortless thanks to the variable Comline Pump 2000. Users can mechanically adjust the flow rate from a gentle 500 liters per hour, ideal for planted tanks with low fish stock, up to a robust 2,100 liters per hour for heavily stocked or saltwater aquariums. The pump also features a revolving flow angle at the outlet, enabling perfect circulation patterns within the tank. To maintain optimal water levels, the system is compatible with the TUNZE Osmolator 3155, which provides precise surface suction and compensates for evaporation automatically.

Safety and ease of maintenance are paramount in the design. Silicone buffers prevent vibration transfer to the glass, while the self-cleaning system minimizes routine upkeep. Weekly cleaning involves a simple cartridge swap, and a thorough disassembly every two years keeps the unit running like new. Whether used in a main aquarium or a cabinet filtration system with variable water levels, the Tunze COMLINE offers reliability, efficiency, and superior water quality.

M: QW-35-FL

© Copyright 2026 Manual.ly