Manual.ly Logo

Trek Supercaliber SL 9.7 AXS Gen 2 Manual

0.0 · 0 Ratings

PDF manual · 20 Pages

English

M: OA-GPT-54-NAN
page

/ 20

Loading...
851b7cdc8214111409fbb438dac1f027cd6b page 2
2024 Supercaliber
1
Inhalt
Sicherheit Hinterachse mit UDH Hinterachse mit SRAM
Transmission
Schaltwerk
Hauptschwinge Schwinge
SLR Zugführung bei
AXS-Schaltung
SLR Zugführung bei
mechanischer
Schaltung
SL Zugführung bei
AXS-Schaltung
SL Zugführung bei
mechanischer
Schaltung
Rahmenschutz
2024 Supercaliber
19
Specifications
Chainline (1x only)
55mm
Chainring (1x only)
Minimum Maximum
30T Round 38T Round
Rear brake mount
160mm Direct Post Mount
OLD
Rear Hub: 148mm
Maximum tire size
29" x 2.4"
Notice: Measurements of actual tires may vary. Always
verify there is sufcient clearance between the tire and
the frame. Improper tire size could damage the bicycle
frame. Trek recommends 6mm clearance above and on
the sides of the tire.
Bottom bracket
Press t BB92
Seat post
WARNING
Always follow the seatpost manufacturer’s minimum
insertion recommendation. Failure to follow the recom-
mendation could cause damage to the seatpost and
result in injury to the rider.
Minimum insertion: Refer to seatpost manufacturer
Maximum insertion:
S: 215
M: 225
ML: 250
L: 270
XL: 330
Seat tube inside diameter: 31.6mm
Seat tube post clamp outer diameter: 36.2mm
Fork
WARNING
Exceeding the recommended maximum fork length could
damage the bicycle and result in injury to the rider.
Travel
Sag
Axle to Crown
Frame/Size Axle to Crown (mm) Travel (mm)
S, M, ML, L, XL Recommended 515 1 10
Maximum 533 120
Recommended sag: Refer to the suspension setup card
included with your bike or the suspension calculator at
Trekbikes.com/suspension-calculator.
IsoStrut Wartung des IsoStrut Buchsen, Gehäuseab-
streifdichtung und
Schaumstoffblöcke
Austausch der
Buchsen und Gehäu-
seabstreifdichtungen
Spezikationen
Copyright 2023 Trek Bicycle Corporation Alle Rechte vorbehalten

Chat with your Trek Supercaliber SL 9.7 AXS Gen 2 manual using AI

Get instant AI answers from your Trek Supercaliber SL 9.7 AXS Gen 2 manual

Ask anything about the Trek Supercaliber SL 9.7 AXS Gen 2. Answers come from this manual, with the pages they are based on.

Supercaliber SL 9.7 AXS Gen 2 Maintenance Schedule

Remind me when maintenance is due
Yearly
Service IsoStrut components

Refer to the RockShox SIDLuxe IsoStrut maintenance manual available via the SRAM dealer portal for exact service instructions.

Show in the manual (page 14)
Before every IsoStrut installation
Apply oil to seals and bushings

Apply a thin layer of Maxima Suspension Plush Fluid 10WT oil to the inner edge of wiper seals before installing the IsoStrut.

Show in the manual (page 15)
Before every IsoStrut installation
Soak foam ring in oil

Soak the foam ring in Maxima Suspension Plush Fluid 10WT oil before inserting it into the front end of the housing.

Show in the manual (page 19)

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend Supercaliber SL 9.7 AXS Gen 2?

Yes No

Frequently Asked Questions

A

It is a cross-country race bike built for speed, efficient climbing, and precise handling. Its lightweight frame and IsoStrut suspension are designed to keep power transfer strong while adding comfort and control on technical trails.

Is this answer helpful?

A

The frame supports up to 29 x 2.4 tires. Trek also recommends keeping at least 6 mm of clearance on the sides and above the tire to avoid rubbing and potential frame damage.

Is this answer helpful?

A

Yes. The frame includes routing options for AXS setups, and the manual provides specific guidance for cable and housing placement. It is built to work cleanly with modern wireless or mechanical configurations.

Is this answer helpful?

A

Trek recommends 110 mm fork travel, with an allowed range from 100 mm to 120 mm. The manual also advises setting sag according to the suspension calculator or the setup card supplied with the bike.

Is this answer helpful?

A

The frame uses a 31.6 mm seatpost diameter. Maximum insertion depth varies by frame size, so riders should follow the seatpost manufacturer’s guidance and Trek’s size-specific limits.

Is this answer helpful?

A

It explains important setup details such as torque values, routing paths, protection placement, and IsoStrut maintenance. That helps keep the bike performing well and reduces the risk of damage during assembly or service.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Lightweight XC-focused frame with efficient IsoStrut rear suspension for fast climbing and better control on rough sections.
  • Clean 1x setup with AXS compatibility keeps the cockpit and drivetrain simple, modern, and race-oriented.
  • Supports up to 29 x 2.4 tires, giving more grip and comfort without losing the bike’s quick handling.
  • Clear maintenance guidance helps with torque, routing, frame protection, and IsoStrut service.
VS

Disadvantages

  • Requires careful setup and torque accuracy, so it is less forgiving for rushed assembly or casual home mechanics.
  • Tire clearance is limited and must be checked closely to avoid frame damage or rubbing.
  • Designed around 1x drivetrain standards, which limits drivetrain flexibility for riders wanting multiple chainrings.
  • IsoStrut service and some routing tasks can be time-consuming and may require specific tools.
M: OA-GPT-54-NAN

Product Specification

Frame Shape

Full Suspension

Frame Material

Carbon

Wheel Size

29"

Fork Type

Suspension

Suspension Fork

RockShox Reba RL, remote lockout

Shock

RockShox SIDLuxe, remote lockout

Travel

4.33-4.72in/3.15in (front/rear)

Brake Type

Hydraulic Disc

Brake

SRAM Level Bronze (front), Avid BB5 (rear)

Shift Lever

SRAM AXS Pod Controller

Rear Derailleur

SRAM GX Eagle AXS

Crankset

SRAM, Pressfit (38)

Cassette

10-52

Gears

12 (1x12)

Max. permissible total weight

299.44 lb

Weight

24.88 lb

Special Features

Adjustable travel fork, internal cable routing, X-12 thru-axle system, 15mm thru-axle system, electronic shifting

M: OA-GPT-54-NAN

Product Description

Trek Supercaliber SL 9.7 AXS Gen 2 Model 2024

The Trek Supercaliber SL 9.7 AXS Gen 2 Model 2024 is made for riders who want XC speed with a smooth, controlled feel. It blends a lightweight race-ready frame with Trek’s signature IsoStrut rear suspension, creating a bike that climbs efficiently, accelerates quickly, and still stays calm when the trail gets choppy.

What makes this model especially appealing is its balance of simplicity and precision. The 1x drivetrain layout keeps things clean and focused, while the 55 mm chainline and 30T to 38T chainring range let riders tune the bike for fast sprints or all-day racing rhythm. It is a setup that feels purposeful, not overloaded.

The frame is built around practical standards that matter in real use: a 148 mm rear hub, BB92 press-fit bottom bracket, and a 31.6 mm seatpost size. Trek also gives clear guidance on tire fit, with support for up to 29 x 2.4 tires, which adds room for modern XC rubber without sacrificing efficiency. That extra clearance can make a difference in traction and comfort when the course gets loose or technical.

For riders who care about maintenance and setup, the Trek Supercaliber SL 9.7 AXS Gen 2 Model 2024 Manual is a useful companion. It explains cable routing for AXS and mechanical builds, outlines torque values, and shows where frame protection should be applied. It also covers IsoStrut service details, including lubrication, bushing care, seal replacement, and token setup, helping the bike stay race-ready over time.

The ride character of the Supercaliber is all about speed with control. Recommended fork travel is 110 mm, with a workable range from 100 mm to 120 mm, so the bike can be tuned to match track conditions and rider style. That makes it a strong choice for racers and performance-minded riders who want a fast machine that still feels composed and adaptable.

Notes

  • Check all torque settings carefully before riding.
  • Confirm tire and fork clearance after any setup change.
  • Follow IsoStrut service guidance for long-term performance.
  • Use only compatible 1x components and approved hardware.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly