Manual.ly Logo

Teufel AC 5011 AP Manual

0.0 · 0 Ratings

PDF manual · 1 Pages

English

M: OA-GPT-54-NAN
page

/ 1

Loading...
76e3eef98538838e0f632f7278d93485a963 page 1
D
Dieser Level Converter ermöglicht
den Anschluss einer Teufel RearStation 4
an einen AV-Receiver/Verstärker ohne
Line-Pegel-Ausgänge.
Level Converter anschließen
Anschlüsse am AV-
Receiver/Verstärker
Input-Drähte am
Level Converter
Lautsprecher-
Ausgang rechts
(+) lila/schwarz
(–) weiß/schwarz
Lautsprecher-
Ausgang links
(+) lila
(–) weiß
Erdung grün
• Die Output-Buchsen des Level Conver-
ters per Cinchkabel mit den Line-In-
Buchsen der RearStation 4 verbinden.
• Zur Anpassung der Lautstärke die bei-
den Potentiometer »LEVEL« mithilfe
eines kleinen Schraubendrehers ein-
stellen. Die Max-Position passt in den
meisten Anwendungsfällen.
• Um Brummprobleme zu vermeiden,
den grünen Erdungsdraht mit der Mas-
se des AV-Receivers verbinden (z.B.
am AM-Antennenanschluss).
Entsorgung des Geräts
Altgeräte dürfen nicht in den
Hausmüll!
Jeder Verbraucher ist gesetzlich
verpflichtet, Altgeräte getrennt vom
Hausmüll z. B. bei einer Sammelstelle sei-
ner Gemeinde/seines Stadtteils abzuge-
ben. Deshalb sind Elektrogeräte mit dem
abgebildeten Symbol gekennzeichnet.
Technische Daten
Eingangsleistung: max. 100 W
Anpassung des
Ausgangspegels: 50 %
Maße (LxBxH): 90 x 65 x 27 mm
GB
This level converter enables you to
connect a Teufel RearStation 4 to an
AV receiver/amplifier without line level
outputs.
Connecting the level converter
Connections on the
AV receiver/amplifier
Input wires on the
level converter
Right speaker
output
(+) purple/black
(–) white/black
Left speaker
output
(+) purple
(–) white
Grounding green
• Connect the output jacks of the level
converter to the Line In jacks of the
RearStation 4 using the RCA cable.
• To adjust the volume, set the two
“LEVEL” potentiometers with a small
screw driver. The max position suits
most applications.
• To prevent buzzing, connect the green
grounding wire with the AV receiver
ground (e.g. at the AM antenna con-
nection).
Disposal of the unit
Used units must not be disposed
of with household waste.
Every consumer is required by law
to dispose of used devices separately
from household waste, e.g. at a collec-
tion point run by the communal author-
ity borough. For this reason, electrical
equipment is labelled with the displayed
symbol.
Technical data
Power input: max. 100 W
Adjustment of the
output level: 50 %
Dimensions (LxWxH): 90 x 65 x 27 mm
Level Converter AC 5011 AP
No responsibility is assumed for the correct-
ness of this information. Technical changes,
typographical errors and other errors reserved.
Alle Angaben ohne Gewähr.
Technische Änderungen, Tippfehler und Irrtum
vorbehalten.
92122 20120416
Lautsprecher Teufel GmbH • Gewerbehof Buelowbogen
Buelowstrasse 66 • 10783 Berlin (Germany)
Telefon: +49 (0)30-300 930 0
E-Mail: info@teufel.de
www.teufel.de / www.teufelaudio.com
Phone: 00800 - 200 300 400 (free of charge)
E-Mail: service@teufelaudio.com
www.teufelaudio.com
92122 20120416.indd 1 16.04.12 11:29

Chat with your Teufel AC 5011 AP manual using AI

Get instant AI answers from your Teufel AC 5011 AP manual

Ask anything about the Teufel AC 5011 AP. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend AC 5011 AP?

Yes No

Frequently Asked Questions

A

It is used to connect a Teufel RearStation 4 to an AV receiver or amplifier that does not have line-level outputs. It converts speaker-level signals into a form the RearStation can use.

Is this answer helpful?

A

The converter connects to the receiver’s speaker outputs using color-coded input wires. The output jacks are then linked to the RearStation 4 with an RCA cable.

Is this answer helpful?

A

The green grounding wire helps reduce hum or buzzing in the audio signal. Connecting it to the receiver ground can improve noise control and overall stability.

Is this answer helpful?

A

Yes. The unit has two LEVEL potentiometers that can be adjusted with a small screwdriver. This lets you fine-tune the sound level for better balance.

Is this answer helpful?

A

It is mainly designed for use with the Teufel RearStation 4. It is especially helpful when the AV receiver or amplifier lacks line-level outputs.

Is this answer helpful?

A

The converter supports an input power of up to 100 W, offers 50% adjustment of the output level, and measures 90 x 65 x 27 mm.

Is this answer helpful?

M: OA-GPT-54-NAN

Advantages and Disadvantages

Advantages

  • Enables a RearStation 4 to work with AV receivers that lack line-level outputs.
  • Compact design fits easily into a home audio setup without taking much space.
  • LEVEL knobs allow simple output tuning for better balance across channels.
  • Ground wire support helps reduce buzzing and improve signal stability.
VS

Disadvantages

  • Requires manual wiring, so installation may be less convenient for beginners.
  • Volume balancing may need trial and error with the small screwdriver adjustment.
  • Limited to setups compatible with speaker-level input conversion.
  • Not a universal audio solution; it is mainly intended for RearStation 4 use.
M: OA-GPT-54-NAN

Product Specification

Type

Converter

M: OA-GPT-54-NAN

Product Description

Teufel Level Converter AC 5011 AP Voltage Converter

The Teufel Level Converter AC 5011 AP is a practical solution for anyone who wants to connect a Teufel RearStation 4 to an AV receiver or amplifier that does not provide line-level outputs. Instead of forcing users to replace their audio gear, this compact converter bridges the gap between speaker outputs and line inputs, making surround sound expansion far more accessible.

What makes this unit useful is its straightforward role in a home audio setup. It takes the speaker-level signal from the receiver, converts it, and sends it onward to the RearStation 4 through RCA connections. For many users, that means a cleaner path to adding rear speakers without complicated upgrades. The wiring is color-coded, which helps simplify installation, and the converter is small enough to fit neatly into most entertainment setups.

Another important feature is the pair of LEVEL potentiometers. These allow fine-tuning of the output signal with a small screwdriver, so the rear channel volume can be balanced to match the rest of the system. In most cases, the maximum position is suitable, but the adjustment option is especially helpful when different amplifiers or room layouts produce slightly different results.

The grounding wire is also worth noting. By connecting the green earth wire to the receiver’s ground point, users can reduce buzzing or unwanted hum. That detail may seem minor, but it often makes the difference between an average setup and a stable, quiet listening experience. For a product of this type, reliability and noise control are just as important as sound conversion itself.

From a technical standpoint, the converter handles an input power of up to 100 W and offers an output level adjustment of 50%. Its compact dimensions of 90 x 65 x 27 mm make it easy to position near existing equipment. It is clearly designed for practical home use rather than flashy features, and that simplicity is part of its appeal.

Notes

  • Best suited for connecting a RearStation 4 to receivers without line outputs.
  • Use the grounding wire to help prevent hum or buzzing.
  • Adjust LEVEL carefully for the most balanced surround sound result.
  • Check compatibility before installation to ensure the cleanest setup.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly