Manual.ly Logo

Telwin Force 145 Manual

0.0 · 0 Ratings

PDF manual · 104 Pages

English

M: QW-35-FL
page

/ 104

Loading...
1f10012051c24f87e24e6f5aa030a56bbbdd page 5
- 5 -
(EN)
INSTRUCTION MANUAL
WARNING! BEFORE USING THE WELDING MACHINE READ THE
INSTRUCTION MANUAL CAREFULLY.
1. GENERAL SAFETY CONSIDERATIONS FOR ARC WELDING
The operator should be properly trained to use the welding machine
safely and should be informed about the risks related to arc welding
procedures, the associated protection measures and emergency
procedures.
(Please refer to the applicable standard “EN 60974-9: Arc welding
equipment. Part 9: Installation and Use).
- Avoid direct contact with the welding circuit: the no-load voltage
supplied by the welding machine can be dangerous under certain
circumstances.
- When the welding cables are being connected or checks and
repairs are carried out the welding machine should be switched o
and disconnected from the power supply outlet.
- Switch o the welding machine and disconnect it from the power
supply outlet before replacing consumable torch parts.
- Make the electrical connections and installation according to the
safety rules and legislation in force.
- The welding machine should be connected only and exclusively to
a power source with the neutral lead connected to earth.
- Make sure that the power supply plug is correctly connected to the
earth protection outlet.
- Do not use the welding machine in damp or wet places and do not
weld in the rain.
- Do not use cables with worn insulation or loose connections.
- Do not weld on containers or piping that contains or has contained
ammable liquid or gaseous products.
- Do not operate on materials cleaned with chlorinated solvents or
near such substances.
- Do not weld on containers under pressure.
- Remove all ammable materials (e.g. wood, paper, rags etc.) from
the working area.
- Provide adequate ventilation or facilities for the removal of
welding fumes near the arc; a systematic approach is needed in
evaluating the exposure limits for the welding fumes, which will
depend on their composition, concentration and the length of
exposure itself.
- Keep the gas bottle (if used) away from heat sources, including
direct sunlight.
- Use adequate electrical insulation with regard to the electrode, the
work piece and any (accessible) earthed metal parts in the vicinity.
This is normally achieved by wearing gloves, shoes, head coverings
and clothing designed for this purpose and by using insulating
platforms or mats.
- Always protect your eyes with the relative lters, which must
comply with UNI EN 169 or UNI EN 379, mounted on masks or use
helmets that comply with UNI EN 175.
Use the relative re-resistant clothing (compliant with UNI EN
11611) and welding gloves (compliant with UNI EN 12477) without
exposing the skin to the ultraviolet and infrared rays produced by
the arc; the protection must extend to other people who are near
the arc by way of screens or non-reective sheets.
- Noise: If the daily personal noise exposure (LEPd) is equal to or
higher than 85 dB(A) because of particularly intensive welding
operations, suitable personal protective means must be used (Tab.
1).
- The ow of the welding current generates electromagnetic elds
(EMF) around the welding circuit.
Electromagnetic elds can interfere with certain medical equipment
(e.g. Pace-makers, respiratory equipment, metallic prostheses etc.).
Adequate protective measures must be adopted for persons
with these types of medical apparatus. For example, they must
be forbidden access to the area in which welding machines are in
operation.
This welding machine conforms to technical product standards for
exclusive use in an industrial environment for professional purposes.
It does not assure compliance with the basic limits relative to human
exposure to electromagnetic elds in the domestic environment.
The operator must adopt the following procedures in order to reduce
exposure to electromagnetic elds:
- Fasten the two welding cables as close together as possible.
- Keep head and trunk as far away as possible from the welding
circuit.
- Never wind welding cables around the body.
- Avoid welding with the body within the welding circuit. Keep both
cables on the same side of the body.
- Connect the welding current return cable to the piece being
welded, as close as possible to the welding joint.
- Do not weld while close to, sitting on or leaning against the
welding machine (keep at least 50 cm away from it).
- Do not leave objects in ferromagnetic material in proximity of the
welding circuit.
- Minimum distance d= 20 cm (Fig. I).
- Class A equipment:
This welding machine conforms to technical product standards
for exclusive use in an industrial environment and for professional
purposes. It does not assure compliance with electromagnetic
compatibility in domestic dwellings and in premises directly
connected to a low-voltage power supply system feeding buildings
for domestic use.
EXTRA PRECAUTIONS
- WELDING OPERATIONS:
- In environments with increased risk of electric shock
- In conned spaces
- In the presence of ammable or explosive materials
MUST BE evaluated in advance by an “Expert supervisor” and must
always be carried out in the presence of other people trained to
intervene in emergencies.
All protective technical measures MUST be taken as provided in
7.10; A.8; A.10 of the applicable standard EN 60974-9: Arc welding
equipment. Part 9: Installation and Use”.
- The operator MUST NOT BE ALLOWED to weld in raised positions
unless safety platforms are used.
- VOLTAGE BETWEEN ELECTRODE HOLDERS OR TORCHES: working
with more than one welding machine on a single piece or on
pieces that are connected electrically may generate a dangerous
accumulation of no-load voltage between two dierent electrode
holders or torches, the value of which may reach double the
allowed limit.
An expert coordinator must be designated to measuring the
apparatus to determine if any risks subsist and suitable protection
measures can be adopted, as foreseen by section 7.9 of the
applicable standard “EN 60974-9: Arc welding equipment. Part 9:
Installation and Use”.
RESIDUAL RISKS
- IMPROPER USE: it is hazardous to use the welding machine for any
work other than that for which it was designed (e.g. de-icing mains
water pipes).
- Do not use the handle to hang the welding machine.
2. INTRODUCTION AND GENERAL DESCRIPTION
This welding machine is a power source for arc welding, made specically
for direct current (DC) .
The specic characteristics of this regulation system (INVERTER), i.e. high
speed and precise regulation, mean the welding machine gives excellent
results when welding both with coated electrodes (rutile, acid, basic).
Regulation with the “inverter” system at the input of the power supply

Chat with your Telwin Force 145 manual using AI

Get instant AI answers from your Telwin Force 145 manual

Ask anything about the Telwin Force 145. Answers come from this manual, with the pages they are based on.

Force 145 Maintenance Schedule

Regularly
Inspect internal components and remove dust

Inspect the welding machine regularly depending on use and dustiness. Remove dust from transformer, reactance, and rectifier using dry compressed air (max 10 bar).

During inspection
Clean electronic boards with soft brush

Do not direct compressed air at electronic boards. Clean them if necessary with a very soft brush or suitable solvents.

During inspection
Check electrical connections and wiring insulation

Ensure electrical connections are tight and check wiring for damage to the insulation during periodic inspections.

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend Force 145?

Yes No

Frequently Asked Questions

A

This machine is classified as Class A equipment intended for professional industrial use. It does not guarantee electromagnetic compatibility in domestic dwellings. Using it at home may interfere with other electronics.

Is this answer helpful?

A

No. The welding current generates electromagnetic fields that can interfere with medical devices like pacemakers. People with such devices or metallic prostheses are strictly prohibited from using or being near the machine.

Is this answer helpful?

A

Do not use compressed air directly on the electronic boards. Clean them gently using a very soft brush or appropriate solvents to avoid damaging sensitive components.

Is this answer helpful?

A

If the internal temperature becomes excessive, the thermal protection will trigger. The machine will remain powered on but will not deliver current until it cools down to a safe level, after which it restarts automatically.

Is this answer helpful?

A

Absolutely not. Using the handle to hang the welding machine is strictly forbidden as it can damage the casing and compromise safety mechanisms.

Is this answer helpful?

A

The Telwin Force 145 supports coated electrodes including rutile, acid, basic, stainless steel, aluminum, and cellulose types, offering great versatility for different welding projects.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Compact and lightweight design thanks to inverter technology
  • Advanced anti-stick protection prevents electrode welding issues
  • High precision current regulation for superior weld quality
  • Comprehensive safety features including thermal and voltage protection
  • Includes durable carrying case for easy transport and storage
VS

Disadvantages

  • Requires proper grounding which may not be available in all locations
  • Not suitable for use by individuals with pacemakers or metallic prostheses
  • May require specific fuse ratings depending on local power grid impedance
  • Electronic boards are sensitive to direct compressed air cleaning
  • Class A equipment classification limits domestic use compliance
M: QW-35-FL

Product Specification

Power

3.5kW (230V)

Open-circuit voltage

72V

Regulation range

10-130A (MMA)

Electrodes

0.06-0.13in (MMA)

Protection class

IP21

Dimensions

14.96x16.54x6.69in (HxWxD)

Weight

11.46lbs

M: QW-35-FL

Product Description

Telwin Force 145: The Ultimate Inverter Welding Machine for Professionals

The Telwin Force 145 MMA Inverter Welding Machine incl. Case Manual represents a pinnacle of modern welding technology designed for serious professionals and demanding hobbyists alike. This compact yet powerful unit utilizes advanced inverter technology to deliver precise, stable arcs with minimal weight and volume. Whether you are working on construction sites, in a fabrication shop, or tackling mobile repair jobs, the inclusion of a dedicated carrying case ensures your equipment remains protected during transport.

At the heart of this machine lies a sophisticated regulation system that converts standard mains voltage into high-frequency alternating current. This process allows for exceptional control over the welding parameters, resulting in superior weld quality across various electrode types including rutile, basic, and stainless steel. The digital control interface features intuitive potentiometers and clear LED indicators that provide real-time feedback on thermal status, power supply stability, and anti-stick protection. Users can adjust current settings on the fly, ensuring optimal performance regardless of the task at hand.

Safety is paramount in the design of the Telwin Force 145. The unit incorporates multiple layers of protection against electrical shock, overheating, and voltage fluctuations. It strictly adheres to international safety standards, making it suitable for industrial environments while maintaining user-friendly operation. The machine includes robust thermal safeguards that automatically pause operation if internal temperatures exceed safe limits, resuming only when conditions normalize. Additionally, the anti-stick feature prevents electrodes from fusing to the workpiece, allowing for easy removal without damaging the clamp.

The versatility of the Telwin Force 145 extends beyond simple arc welding. Its ability to handle different electrode diameters makes it an essential tool for diverse applications. From thin sheet metal repairs to heavy structural joins, this inverter provides the reliability needed for consistent results. The included manual offers comprehensive guidance on installation, maintenance, and troubleshooting, ensuring users can maximize the lifespan and efficiency of their investment.

Key Notes

  • Compact design fits easily into the included carrying case.
  • Advanced IGBT technology ensures high energy efficiency.
  • Multiple safety protections prevent damage and injury.
  • Suitable for both single-phase and dual-voltage operations depending on the model variant.
M: QW-35-FL

© Copyright 2026 Manual.ly