Manual.ly Logo

TC Helicon Go Solo Manual

0.0 · 0 Ratings

PDF manual · 2 Pages

English

M: OA-GPT-5-NAN
page

/ 2

Loading...
9b72c453bed3c190f4298dc6922c89c6973a page 1
GO SOLO
High-Denition Audio/MIDI Interface for Mobile Devices
Connect GO SOLO to a computer, phone or
tablet using the included cables. If using the
provided lightning cable, insert a pair of AA
batteries to power GO SOLO, or connect a 5V power
supply (not included) to power GO SOLO and charge
your iOS device.
Connect microphone, instrument or line-level
source to the input using XLR or ¼" cables.
Plug a pair of headphones into the HEADPHONE
output. Set LEVEL control to minimum to start.
To enable phantom power move the 48 V
power switch to the ON position. The 48 V LED on
the front panel will light blue.
While speaking into the microphone or playing
your instrument, turn up the GAIN wheel. The SIG
LED should light green to indicate a signal present.
If the SIG LED lights red, turn the GAIN wheel down
to avoid clipping.
Connect MIDI devices to the mini 2.5 mm input
and output jacks using the included adapter cables.
Download your favorite TC Helicon app to
begin experimenting with eects.
Quick Start Guide
Getting started

Chat with your TC Helicon Go Solo manual using AI

Get instant AI answers from your TC Helicon Go Solo manual

Ask anything about the TC Helicon Go Solo. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Go Solo?

Yes No

Frequently Asked Questions

A

Go Solo is class-compliant USB Audio 1.0, so it works with most computers, phones and tablets that support USB audio. For iOS devices using the included Lightning cable, insert two AA batteries or use a 5 V DC supply to power the unit and charge the device.

Is this answer helpful?

A

Yes. Go Solo provides switchable +48 V phantom power. Flip the 48 V switch to ON and confirm the 48 V LED lights blue before using a condenser microphone. Always enable phantom power only when a condenser mic that requires it is connected.

Is this answer helpful?

A

The interface uses 24-bit A/D and D/A conversion at 44.1 kHz or 48 kHz, with a frequency response of 20 Hz–20 kHz (±3 dB) and a dynamic range greater than 98 dB, delivering transparent capture for vocals and instruments.

Is this answer helpful?

A

Power options include USB bus power from a computer, an external 5 V DC supply (≥2.5 A, center positive), or two AA batteries. Batteries enable portable use, especially with iOS devices when using the Lightning cable.

Is this answer helpful?

A

Yes. It features MIDI input and output via mini 2.5 mm jacks and ships with adapter cables for standard MIDI connections, allowing you to connect MIDI controllers or hardware synths for performance or recording.

Is this answer helpful?

A

Go Solo offers one XLR microphone input, one 1/4" TS instrument input, a stereo headphone output, USB audio for computer/device I/O, and mini 2.5 mm MIDI in/out jacks. It’s a single-channel audio interface for straightforward setups.

Is this answer helpful?

A

The DC power supply is not included and must meet the 5 V ≥2.5 A specification. Only one audio channel is available, and MIDI uses small adapter cables that should be handled carefully. USB Audio 1.0 is broadly compatible but lacks some advanced driver features.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Portable, lightweight design ideal for mobile recording and travel.
  • XLR and 1/4" inputs plus switchable 48 V phantom power for condenser mics.
  • 24-bit A/D and D/A conversion at 44.1/48 kHz with >98 dB dynamic range.
  • Class-compliant USB Audio 1.0 for plug-and-play on most devices.
  • Multiple power options: USB bus, 5 V DC supply or 2xAA batteries.
VS

Disadvantages

  • USB Audio 1.0 limits sample rate/feature set compared with newer interfaces.
  • DC power supply not included; requires ≥2.5 A adapter for best results.
  • Single-channel input limits multi-source simultaneous recording.
  • Mini 2.5 mm MIDI jacks require adapter cables that are included but fragile.
  • No onboard DSP for advanced monitoring or multi-channel routing.
M: OA-GPT-5-NAN

Product Specification

Interface

USB 2.0

Input Channels

1

Output Channels

2

Mic Preamps

1

Analog Inputs

1x Mic/Line/Instrument In (XLR/6.35mm Combo)

Analog Outputs

1x Headphone (3.5mm Jack)

Digital Inputs

no

Digital Outputs

no

AD/DA Converter

24bit/44.1kHz

Features

Bus powered, MIDI In/Out

Dimensions

1.57x1.77x5.04in (WxHxD)

Weight

0.62lb

M: OA-GPT-54-NAN

Product Description

TC Helicon Go Solo — Compact Audio/MIDI Interface

The TC Helicon Go Solo is a portable, high-definition audio and MIDI interface designed for mobile creators, singer-songwriters and podcasters who need simple, reliable recording on the go. Small enough to slip into a bag, Go Solo connects to computers, phones and tablets using the included cables and offers a straightforward signal chain for microphone, instrument or line-level sources.

Equipped with an XLR input for microphones and a 1/4" TS instrument input, Go Solo handles both dynamic and condenser mics (48 V phantom power switchable). A single LEVEL control and GAIN knob make setup fast: start with LEVEL at minimum, bring up GAIN until the SIG LED shows green, and reduce if the LED turns red to avoid clipping. Headphones output provides direct monitoring for latency-free performance.

Go Solo’s digital section is class-compliant USB Audio 1.0 with 24-bit A/D and D/A conversion at 44.1 or 48 kHz, delivering a clear 20 Hz–20 kHz frequency response and a dynamic range greater than 98 dB. MIDI I/O is available via mini 2.5 mm jacks with included adapter cables, allowing easy connection to external controllers or synths. The unit can be powered several ways: USB bus power, a 5 V DC supply (≥2.5 A, center positive), or two AA batteries for true mobile operation; using the Lightning cable with iOS devices requires the AA batteries or an external 5 V supply.

Build and specs are focused on usability and portability: compact dimensions (40 x 45 x 128 mm) and a lightweight 0.28 kg frame make it ideal for travel. The straightforward front-panel LED indicators (SIG and 48 V) and intuitive controls reduce setup time so creators can focus on performance and sound. Compatibility with TC Helicon apps extends creative possibilities with built-in effects and tools for vocal processing and practice.

Whether you’re capturing a quick demo, streaming with better audio, or recording on a laptop or phone, Go Solo balances essential features with plug-and-play simplicity. It’s engineered to be a reliable companion for musicians who value portability without sacrificing audio fidelity.

Notes

  • Includes cables and MIDI adapter cables; DC power supply not included.
  • Use AA batteries for true mobile iOS compatibility when using the provided Lightning cable.
  • Phantom power is switchable; ensure condenser mics can accept +48 V.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly