Manual.ly Logo

SW-Stahl S3296 Manual

0.0 · 0 Ratings

PDF manual · 12 Pages

English

M: QW-35-FL
page

/ 12

Loading...
0cd5d4bc163e2e007714d6de4d81b6b97eba page 5
5
S3296
DESCRIPTION
Speed: 8.500 rpm
Drive: 12.5 mm (1/2“)
Maximum Torque: 325 Nm
Maximum loosening torque: 450 Nm
Sound pressure level: 92.2 dB (A)
Sound level: 103.2 dB (A)
Operating pressure: 6.3 bar
Air consumption: 113 l/min
Compressed air connection: 1/4 “
Vibrations: 9,96 m/s²
Length: 88 mm
Weight: 1.16 kg
1. Branch pipe
2. Main pipe downward
pitch 40 mm over 3 mm
3. Drain tap
4. Shut-off valve
5. Filter
6. Regulator
7. Oiler
8. Coupler
9. Air hose
10. Compressor
11. Main pipe
SAFETY INSTRUCTIONS
1. In the case of a drive square with bore hole, the socket must be secured using a steel pin
andrubberring.Ifthedrivesquareisfittedwithaspringring,thismustbecheckedfor
sufficienttensionatregularintervalsandreplacedifnecessary.Asocketwhichisnot
securedasdescribedinthewaydescribedherecanbecomeloosefromthetooland
cause damage. For this reason, never allow the pneumatic tool to rev up in idling gear if
there is a socket on the drive.
2. Onlyusesocketswhicharesuitableforimpactscrewdrivers.
1. Branch pipe
2.
pitch 40 mm over 3 mm
3.
4.
5. Filter
6. Regulator
7. Oiler
8. Coupler
9. Air hose
10. Compressor
11. Main pipe

Chat with your SW-Stahl S3296 manual using AI

Get instant AI answers from your SW-Stahl S3296 manual

Ask anything about the SW-Stahl S3296. Answers come from this manual, with the pages they are based on.

S3296 Maintenance Schedule

Every 60 working hours
Lubricate the hammer mechanism

Lightly lubricate the impact wrench's hammer mechanism after every 60 working hours. Avoid using too much grease as it can cause the mechanism to stick and impair performance.

Regularly
Check spring ring tension on drive square

If the drive square is fitted with a spring ring, check it for sufficient tension at regular intervals and replace if necessary to ensure socket security.

M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend S3296?

Yes No

Frequently Asked Questions

A

The tool provides a maximum tightening torque of 325 Nm and a maximum loosening torque of 450 Nm, suitable for demanding industrial applications.

Is this answer helpful?

A

You should lightly lubricate the hammer mechanism after every 60 working hours. Over-lubrication can cause the mechanism to stick and reduce performance.

Is this answer helpful?

A

The recommended operating pressure measured under load is 6.3 bar. Pressures below 5.5 bar result in extreme power loss, while higher pressures increase wear.

Is this answer helpful?

A

No, safety gear is mandatory. You must wear ear protection, safety gloves, and goggles due to high noise levels and vibration risks during operation.

Is this answer helpful?

A

Yes, the rotation direction is adjustable by turning the setting ring. Clockwise rotation is set to F and counter-clockwise to R.

Is this answer helpful?

A

A complete maintenance unit with an air filter, regulator, and oil-fog lubricator is recommended, installed within 6 to 8 meters of the tool.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • High torque output of 325 Nm tightening and 450 Nm loosening capabilities
  • Compact and lightweight design at 1.16 kg for easy handling in tight spaces
  • Adjustable rotation direction and three-stage power output settings
  • Compatible with standard 1/2 inch drive sockets and accessories
  • Complies with EU Machinery Safety Directives and international standards
VS

Disadvantages

  • Requires strict adherence to air quality and pressure specifications
  • Noise level of 103.2 dB necessitates mandatory hearing protection
  • Vibration level of 9.96 m/s² may cause fatigue without anti-vibration gloves
  • Lubrication must be performed every 60 hours to prevent mechanism sticking
  • Hose diameter must be carefully selected to avoid excessive pressure drop
M: QW-35-FL

Product Specification

Type

Impact wrench

Operating pressure

91.35 psi

Air consumption

4.00 cfm

No-load speed

8500 rpm

Torque

240 lb-ft

Breakaway torque

332 lb-ft

Drive size

1/2" square

Features

Right/left rotation, torque preset, soft grip, vibration damping

Weight

2.56 lbs

M: QW-35-FL

Product Description

SW-Stahl S3296 Air Impact Wrench - Read, Download & Print Free

The SW-Stahl S3296 Air Impact Wrench is a high-performance pneumatic tool designed for professional mechanics and industrial applications requiring robust torque and precision. This angle impact wrench delivers a maximum tightening torque of 325 Nm and a loosening torque of up to 450 Nm, making it ideal for heavy-duty bolt removal and installation tasks. With a compact design weighing only 1.16 kg and a length of just 88 mm, the tool offers excellent maneuverability in tight spaces while maintaining powerful output.

Operating at a speed of 8,500 rpm, the S3296 ensures rapid fastener handling. It requires an operating pressure of 6.3 bar and consumes approximately 113 liters of air per minute through its 1/4 inch compressed air connection. The tool features a 12.5 mm (1/2 inch) drive square, compatible with standard impact sockets. Safety is paramount; users must wear hearing protection, safety gloves, and goggles due to noise levels reaching 103.2 dB(A). Proper maintenance includes regular lubrication every 60 hours and ensuring clean, dry, and oil-filtered air supply to prevent internal damage.

Key Features and Usage

To ensure optimal performance, the air inlet should be lubricated with acid-free pneumatic oil before use. The rotation direction is easily adjustable via a setting ring, allowing for clockwise or counter-clockwise operation. The output power can be fine-tuned in three stages for different applications. Always secure sockets properly using steel pins or rubber rings if the drive square has a bore hole to prevent accidental detachment during high-speed operation.

Important Maintenance Notes

Regular cleaning of couplers and hoses is essential before connecting the tool. Avoid using damaged pressure hoses and ensure hose diameters are sufficient to maintain pressure above 5.5 bar under load. Storing the tool after long periods requires thorough lubrication to protect internal components from corrosion.

M: QW-35-FL

© Copyright 2026 Manual.ly