Manual.ly Logo

Supermicro SuperServer E200-9A Manual

0.0 · 0 Ratings

PDF manual · 106 Pages

English

M: QW-35-FL
page

/ 106

Loading...
613755618523ba06ee6991ddbc5ae1a90425 page 2
The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes
no responsibility for any inaccuracies that may be contained in this document, and makes no commitment to update
or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note:
For the most up-to-date version of this manual, please see our website at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this manual
at any time and without notice. This product, including software and documentation, is the property of Supermicro and/
or its licensors, and is supplied only under a license. Any use or reproduction of this product is not allowed, except
as expressly permitted by the terms of said license.
IN NO EVENT WILL Super Micro Computer, Inc. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT
OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER
MICRO COMPUTER, INC. SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED
OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the
State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution
of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual,
may cause harmful interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only
to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate”.
WARNING: Handling of lead solder materials used in this product may expose you to lead, a
chemical known to the State of California to cause birth defects and other reproductive harm.
The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment,
nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical

property damage. Accordingly, Supermicro disclaims any and all liability, and should buyer use or sell such products
for use in such ultra-hazardous applications, it does so entirely at its own risk. Furthermore, buyer agrees to fully
indemnify, defend and hold Supermicro harmless for and against any and all claims, demands, actions, litigation, and
proceedings of any kind arising out of or related to such ultra-hazardous use or sale.
Manual Revision 1.0
Release Date: December 29, 2017
Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part of this

to herein are trademarks or registered trademarks of their respective companies or mark holders.
Copyright © 2017 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America

Chat with your Supermicro SuperServer E200-9A manual using AI

Get instant AI answers from your Supermicro SuperServer E200-9A manual

Ask anything about the Supermicro SuperServer E200-9A. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend SuperServer E200-9A?

Yes No

Frequently Asked Questions

A

It utilizes an Intel Atom SoC C3000 Series single socket processor integrated directly onto the A2SDi-4C-HLN4F motherboard.

Is this answer helpful?

A

The system supports up to 256GB of RDIMM or 64GB of UDIMM DDR4 memory across four DIMM slots, running at speeds up to 2133 MHz.

Is this answer helpful?

A

Yes, it includes one 2.5-inch drive bay for a hard drive and one M.2 slot for solid-state storage devices.

Is this answer helpful?

A

Absolutely. It features IPMI v2.0 support with a dedicated LAN port and SuperDoctor 5 software for comprehensive system monitoring.

Is this answer helpful?

A

Yes, the SC101F chassis comes with two 4 cm fans installed, plus an optional third fan location for enhanced cooling.

Is this answer helpful?

A

You can clear the CMOS by moving the JBT1 jumper to the clear position or removing the onboard battery temporarily after powering down.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Compact Mini ITX design saves valuable rack or desk space
  • Supports up to 256GB of DDR4 memory for high performance
  • Dedicated IPMI port enables powerful remote management capabilities
  • Multiple I/O options including four Gigabit LAN ports
  • Flexible storage with M.2 and 2.5-inch drive support
VS

Disadvantages

  • Requires manual installation of memory and storage components
  • Single socket limits CPU upgrade potential compared to dual-socket servers
  • Fan replacement requires full chassis disassembly
  • No hot-swap drive bays included in standard configuration
  • Limited expansion slots restrict adding additional PCIe cards
M: QW-35-FL

Product Specification

Type

Mini-PC

Chipset

System-on-Chip (SoC)

Socket

N/A

External bays

N/A

Internal bays

1 x 2.5"

Wireless

N/A

Card reader

N/A

CPU cooler

included

USB writing

Link

M: QW-35-FL

Product Description

Supermicro SuperServer E200-9A: Compact Power for Embedded Applications

The Supermicro SuperServer E200-9A stands as a pinnacle of compact server engineering, designed specifically for demanding embedded and edge computing environments. This system integrates the robust SC101F mini-ITX chassis with the powerful A2SDi-4C-HLN4F motherboard, creating a solution that balances high performance with minimal physical footprint. Ideal for professional system integrators and technicians, this unit delivers reliable processing power through its Intel Atom SoC C3000 Series processor, making it perfect for applications requiring continuous operation in tight spaces.

At the heart of the E200-9A lies its flexible memory architecture. The motherboard features four DDR4 DIMM sockets capable of supporting up to 256GB of RDIMM or 64GB of UDIMM, operating at speeds up to 2133 MHz. Whether you require ECC reliability or non-ECC speed, the system adapts to your needs while maintaining optimal interleaved performance when modules are populated correctly. Storage flexibility is equally impressive, offering a dedicated slot for an M.2 SSD and support for a 2.5-inch hard drive with a 9.5mm thickness limit, ensuring fast boot times and ample data capacity.

Connectivity options are extensive for such a small form factor. Users gain access to four Gigabit Ethernet ports for network redundancy and speed, alongside a dedicated IPMI LAN port for out-of-band management. The inclusion of USB 2.0 ports, a VGA interface, and a TPM 2.0 header ensures compatibility with a wide range of peripherals and security requirements. The chassis design further enhances usability with front-facing LED indicators for power, network activity, and hard drive status, allowing for quick visual diagnostics without opening the case.

Installation is streamlined with clear instructions for mounting brackets and rack configurations, though users must remember that adding components like memory or drives requires careful handling and power removal. The system also supports advanced management features via SuperDoctor 5 and IPMI v2.0, enabling remote monitoring of temperatures, voltages, and fan speeds. With its passive CPU cooling and efficient dual-fan setup, the E200-9A maintains thermal stability even in confined enclosures. This server represents a versatile choice for industrial automation, network gateways, and virtualization tasks where space and efficiency are paramount.

Important Notes

  • Always use a UPS to protect against power surges.
  • Do not operate the server without the cover installed for extended periods.
  • Clearing CMOS will reset all passwords and settings to default.
M: QW-35-FL

© Copyright 2026 Manual.ly