Sungrow AC011E-01 Manual
PDF manual · 52 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Sungrow AC011E-01 manual using AI
Get instant AI answers from your Sungrow AC011E-01 manual
Ask anything about the Sungrow AC011E-01. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend AC011E-01?
Yes NoFrequently Asked Questions
The Sungrow AC011E-01 delivers up to 11 kW of AC charging power. It is designed for a 400 V three-phase electrical supply and supports a maximum current of 16 A.
Is this answer helpful?
The charger includes an integrated 7 m charging cable with a Type 2 connector. This cable length can make it easier to reach an EV inlet in common driveway and parking arrangements.
Is this answer helpful?
Yes. Its IP65-rated enclosure is designed to resist dust and water ingress, making it suitable for appropriate indoor or outdoor locations. Installation should still avoid direct sunlight, heavy rain exposure, snow accumulation, flammable hazards, and poorly ventilated spaces.
Is this answer helpful?
Charging can be started through an RFID card, the iEnergyCharge app, an EMS setup, or Plug and Play mode. Plug and Play begins charging automatically after the connector is inserted into the vehicle.
Is this answer helpful?
Yes. The iEnergyCharge app can connect the charger to an account and lets users start or stop sessions, check live charging information, manage RFID cards, and review charging results. Internet access and charger configuration are needed for connected functions.
Is this answer helpful?
The charger includes 6 mA DC leakage detection, overvoltage, undervoltage, overload, and overtemperature protection. A suitable external Type A 30 mA residual current device and circuit protection are also required as part of the installation.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Up to 11 kW three-phase AC charging supports efficient everyday EV charging.
- Integrated 7 m Type 2 cable provides flexible reach for varied parking positions.
- IP65 enclosure supports suitable indoor and outdoor installation.
- RFID, app, EMS, and Plug and Play modes offer flexible access and control.
- Wi-Fi, RS485, iEnergyCharge, and iSolarCloud support connected management.
Disadvantages
- Requires a 400 V three-phase supply to achieve its stated 11 kW maximum output.
- Professional installation and dedicated upstream electrical protection are required.
- Optional pole mounting hardware is purchased separately.
- Wi-Fi commissioning access is available for a limited 15-minute period after startup.
- Outdoor placement still benefits from protection against direct sun, rain, and snow.
Product Specification
Number of charging points
1
Max. charging power
11 kW, three-phase
Charging mode
IEC 61851-1 (Mode 3)
Number of phases
three-phase
Voltage
400 V (AC)
Max. current per phase
16 A
Connector type
Type 2
Connection type
23 ft cable
Installation
Wall-mounted
Authorization
App, RFID
Interfaces
RS-485, OCPP 1.6
Protection rating
IP65
Color
white
Dimensions
8.07 x 12.2 x 3.62 in (W x H x D)
Weight
8.38 lb
Product Description
Sungrow AC011E-01, 7m Charging Cable Manual: Smart EV Charging at Home and Beyond
The Sungrow AC011E-01 is a compact AC electric vehicle charger designed for convenient, reliable daily charging. With an integrated 7 m Type 2 charging cable, it gives drivers useful reach for parking layouts where the vehicle inlet is not close to the installation point. This Sungrow AC011E-01, 7m Charging Cable Manual overview highlights its key functions, installation options, charging controls, and protection features.
Flexible Charging for Connected EV Ownership
Delivering up to 11 kW of AC charging power, the AC011E-01 operates on a 400 V, three-phase supply with a maximum current of 16 A. It supports several ways to begin a session: Plug and Play, RFID card, mobile app, or an energy management system. This flexibility helps the charger suit private homes, shared parking spaces, and solar-aware energy setups.
A blue LED indicator provides clear at-a-glance status information. It identifies standby operation, vehicle connection, active charging, completed charging, RFID card use, and firmware updates. Red LED patterns flag abnormal conditions, helping users and installers recognize issues such as voltage, frequency, leakage current, overcurrent, or wiring concerns.
Built for Indoor and Outdoor Locations
The charger has an IP65 enclosure rating, providing protection against dust and water ingress for suitable indoor or outdoor placement. Its compact 205 x 310 x 92 mm enclosure and 3.8 kg weight support a neat installation. It can be mounted directly on a wall or installed on an optional mounting pole.
For safe operation, the unit should be fitted vertically on a robust surface, in a well-ventilated location away from flammable hazards and direct exposure to strong sunlight, rain, or snow where possible. Professional installation is important: each charger requires suitable upstream circuit protection, including a Type A 30 mA residual current device. The charger also includes 6 mA DC leakage detection.
App and Network Management
Wi-Fi and RS485 communication support connected monitoring and setup. The iEnergyCharge app allows users to link the charger to an account, start or stop sessions, review live charging information, manage RFID cards, and enable selected cards for offline charging. The charger can also work with iSolarCloud when paired with a compatible Sungrow inverter in an EMS configuration.
Wireless commissioning can be completed through the built-in access point and local web interface. Network settings, charging modes, firmware updates, and factory reset functions are available for streamlined device management.
Notes
- The 7 m cable should be stored on its holder to keep the connector protected and the area tidy.
- Confirm local electrical rules, cable routing, circuit protection, and mounting strength before installation.
- Use qualified electrical personnel for wiring, commissioning, repairs, and safety checks.
Search for 67,706 Manuals online
Type-in Brand or Model