Manual.ly Logo

Studer AJ 350-24 Manual

0.0 · 0 Ratings

PDF manual · 52 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 52

Loading...
38438df7c118ad72a2307f34fa24aa14a2e5 page 6
AJ STUDER Innotec SA
4 V3.4.2
ENGLISH DESCRIPTION
INTRODUCTION
The AJ series sine wave inverters have been
designed to meet industrial and domestic
needs. They meet the highest requirements in
terms of comfort, safety and reliability.
Any device designed for the public electrical
grid of 230 V 50 Hz can be connected to them
(up to the nominal power of the inverter).
The AJ series is the perfect source of voltage in
any place where the public grid is not
available.
This document is an essential part of the inverter
and must always be carried with it and be
available for anyone working on the
installation.
Should you have any doubt or question, do not
hesitate to contact your specialist salesperson
who will give you the best advice.
WARNING
A deficient assembly could result in damage to
the device, cause function failures or potential
damage to the users.
The working device generates a high voltage
which might be lethal in case of contact. So,
any manipulation of the inverter must be
carried out with utmost care and meet the
local rules.
THE OWNER MUST NOT MANIPULATE ANY PIECE
INSIDE THE INVERTER.
Opening the inverter or using it incorrectly will
result in the immediate loss of the warranty.
The inverter AJ is to be used only with a lead
battery. As for the use of batteries, follow the
manufacturer’s instructions.
No current or voltage generating device
(public grid, generator, ...) may be connected
to the output of the inverter because this could
result into its destruction.
INSTALLATION
The AJ sine wave inverter is an electronic
device, for which some caution must be taken
when installing it.
Inverter mounting place
Out of reach for unauthorized persons,
especially children.
In a dry place (max. 95% humidity), and in any
case with no condensation.
Not directly on top of the batteries.
No easily inflammable material should be
placed directly underneath or close to the AJ.
Ventilation must be free, and a space of 10 cm.
on each side is needed for good evacuation of
the internal heat.
Mounting the inverter
The inverter shall be mounted on a
nonflammable surface by screws (diameter
max. 4 mm for AJ 275-AJ 1300 or max. 8 mm for
AJ 2100 and 2400) using the four holes
provided. The fixing screws are not supplied
with the inverter. It may be fixed in any position.

Chat with your Studer AJ 350-24 manual using AI

Get instant AI answers from your Studer AJ 350-24 manual

Ask anything about the Studer AJ 350-24. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend AJ 350-24?

Yes No

Frequently Asked Questions

A

The warranty period is 5 years. It does not cover damages arising from use not conforming to user manual.

Is this answer helpful?

A

Connect using black cable for negative pole and red cable for positive pole. Observe polarity carefully to avoid damage.

Is this answer helpful?

A

No. No current or voltage generating device may be connected to the output because this could result in destruction.

Is this answer helpful?

A

Adjust the yellow turning knob marked Stand-by to change the minimal detected load between 1 and 20 W.

Is this answer helpful?

A

Yes, provided it is installed correctly. However, ensure ventilation is free and no inflammable material is nearby.

Is this answer helpful?

A

Operating temperature is -20 degrees C up to +50 degrees C with relative humidity up to 95%.

Is this answer helpful?

A

Yes, models with option -S have a built-in solar charge controller for photovoltaic modules.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • High efficiency up to 94% ensures optimal energy usage.
  • Built-in Battery Lifetime Optimizer extends battery life.
  • Five year warranty provides long-term security.
  • Pure sine wave output supports all standard appliances.
  • Stand-by system reduces unnecessary power consumption.
VS

Disadvantages

  • Fixing screws must be purchased separately from unit.
  • Battery connection can spark due to capacitor charging.
  • Reverse polarity breaks internal fuse and requires service.
  • High voltage output poses lethal risk if mishandled.
  • Adjustment of functions needs small screwdriver access.
M: qwen/qwen3.5-flash-20260224

Product Specification

Output Voltage

230V AC Modified Sine Wave

Features

Remote Control, Overheat Protection

M: qwen/qwen3.5-flash-20260224

Product Description

Enhancing Power Reliability with Studer AJ

The Studer AJ 350-24 inverter stands out as a reliable solution for off-grid power systems. Designed to meet industrial and domestic needs, it delivers high safety and reliability standards. Any device designed for the public electrical grid of 230V 50Hz can be connected to it. This makes it an ideal voltage source where the public grid is not available. The system relies on lead batteries for performance. Owners must follow strict assembly rules to maintain warranty. A deficient assembly could result in damage to the device. The working device generates high voltage which might be lethal in case of contact. So, any manipulation of the inverter must be carried out with utmost care. The owner must not manipulate any piece inside the inverter. Opening the inverter results in immediate loss of warranty.

Installing the unit requires careful planning. Mounting place should be out of reach for unauthorized persons, especially children. A dry place with no condensation is essential. No easily inflammable material should be placed directly underneath. Ventilation must be free with 10cm space on each side. Mounting the inverter is done with screws on a nonflammable surface. The fixing screws are not supplied with the inverter. It may be fixed in any position.

Connection involves connecting consumer devices before the battery. First connect the consumer devices and install a plug. Installation is to be made only by authorized persons. Connect the battery observing carefully the polarity. The AJ inverter is protected against reverse polarity by a fuse. Connect the battery using colours. Black cable for negative pole. Red cable for positive pole. When connecting the battery, there is a spark because of charging internal filtering capacitors.

Use includes control and indicators. Control switch on off. Use this function to save energy of the batteries when you are not using the inverter. The solar charge controller remains in operation even when the inverter is off. Green LED indicates functioning mode. Illuminated means 230V voltage present at output. Blinking means no load or alarm. Acoustic indicator warns of failures or Overheat. Low battery voltage triggers beep before interruption. Alarm by voltage flickering warns of imminent stop. Models with stand by system save energy by turning off intermittently. Activation deactivation of functions allows user customization. Safety features include battery lifetime optimizer. This function readsjusts the low voltage disconnection threshold. It enhances battery lifetime. Warranty limit is 5 years. Product recycling follows European directive.

Reference the Studer AJ 350-24 Manual. Technical data shows continuous power at 25 degrees C is 300VA. Max efficiency is 94%. Output is Sine wave 230Vac. Warranty lasts 5 years. Maintenance is minimal, casing may be cleaned with damp cloth. In case of malfunction, send back to manufacturer. Product recycling should utilize electrical waste collection.

Notes

Ensure proper ventilation to prevent overheating. Check wiring annually.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly