Manual.ly Logo

Stiebel Eltron DHB-E 18/21/24 LCD Manual

5.0 · 3 Ratings

PDF manual · 116 Pages

English

M: QW-35-FL
page

/ 116

Loading...
a96c16f4dee662a67ef6cfa2359008e53cc2 page 6
BEDIENUNG

6 | DHB-E LCD www.stiebel-eltron.com
4.2 Einstellungsempfehlungen
Ihr Durchlauferhitzer sorgt für max. Genauigkeit und max. Komfort
der Warmwasserdarbietung. Sollten Sie das Gerät trotzdem mit
einer Thermostat-Armatur betreiben, empfehlen wir:
Stellen Sie die Soll-Temperatur am Gerät größer 50°C ein.
Die gewünschte Soll-Temperatur stellen Sie dann an der
Thermostat-Armatur ein.
Energie sparen
Die wenigste Energie benötigen Sie bei folgenden, von uns emp-
fohlenen Einstellungen:
- 38°C für Handwaschbecken, Dusche, Wanne
- 55°C für Küchenspüle
Interner Verbrühschutz (Fachandwerker)
Auf Wunsch kann der Fachhandwerker eine dauerhafte Tempera-
turbegrenzung einstellen, z.B. in Kindergärten, Krankenhäusern
usw.
Bei Versorgung einer Dusche muss des Fachhandwerker den Tem-
peratureinstellbereich im Gerät auf 55°C oder geringer begrenzen.
Durch die Begrenzung wird verhindert, dass Wasser mit Tem-
peraturen aus dem Gerät fließt, bei denen es zu Verbrühungen
kommen kann.
Einstellungsempfehlung bei Betrieb mit einer Thermostat-
Armatur und solar vorgewärmtem Wasser
Stellen Sie die Temperatur am Gerät auf maximale Tempera-
tur ein.
Nach Unterbrechung der Wasserversorgung
!
Sachschaden
Damit das Blankdraht-Heizsystem nach Unterbrechung
der Wasserversorgung nicht zerstört wird, muss das
Gerät mit folgenden Schritten wieder in Betrieb genom-
men werden.
Schalten Sie das Gerät spannungsfrei, indem Sie die
Sicherungen ausschalten.
Öffnen Sie die Armatur eine Minute lang, bis das
Gerät und die vorgeschaltete Kaltwasser-Zuleitung
luftfrei sind.
Schalten Sie die Spannungsversorgung wieder ein.
5. Reinigung, Pflege und Wartung
Verwenden Sie keine scheuernden oder anlösenden Reini-
gungsmittel. Zur Pflege und Reinigung des Gerätes genügt
ein feuchtes Tuch.
Kontrollieren Sie regelmäßig die Armaturen. Kalk an den
Armaturausläufen können Sie mit handelsüblichen Entkal-
kungsmitteln entfernen.
6. Problembehebung
Problem Ursache Behebung
Das Gerät schaltet trotz voll geöffnetem
Warmwasser-Ventil nicht ein.
Es liegt keine Spannung an. Prüfen Sie die Sicherungen in der Hausinstallation.
Der Strahlregler in der Armatur oder der
Duschkopf ist verkalkt oder verschmutzt.
Reinigen und/ oder entkalken Sie den Strahlregler oder den Duschkopf.
Die Wasserversorgung ist unterbrochen. Entlüften Sie das Gerät und die Kaltwasser-Zuleitung.
Während warmes Wasser entnommen
wird, fließt kurzzeitig kaltes Wasser.
Die Lufterkennung erkennt Luft im Wasser.
Sie schaltet die Heizleistung kurzzeitig ab.
Das Gerät geht nach 1Minute selbstständig wieder in Betrieb.
Die Wunschtemperatur lässt sich nicht
einstellen.
Der interne Verbrühschutz ist aktiviert. Den internen Verbrühschutz kann nur der Fachhandwerker verändern.
Hinweis
Nach einem Ausfall der Spannungsversorgung
Die Anzeigen in der Bedieneinheit und die gewählten Ein-
stellungen bleiben nach einem Ausfall der Spannungs-
versorgung erhalten.
Wenn Sie die Ursache nicht beheben können, rufen Sie den Fach-
handwerker. Zur besseren und schnelleren Hilfe teilen Sie ihm die
Nummer vom Typenschild mit (000000-0000-000000).
Nr. 000000-0000-00000
Nr. 000000-0000-00000
D0000053312

Chat with your Stiebel Eltron DHB-E 18/21/24 LCD manual using AI

Get instant AI answers from your Stiebel Eltron DHB-E 18/21/24 LCD manual

Ask anything about the Stiebel Eltron DHB-E 18/21/24 LCD. Answers come from this manual, with the pages they are based on.

DHB-E 18/21/24 LCD Maintenance Schedule

Regularly
Check taps and remove limescale

Check the taps regularly. Remove limescale deposits at tap outlets using commercially available descaling agents.

As needed
Clean strainer if dirty

If dirty, clean the strainer in the cold water threaded fitting. Close shut-off valves before removing, cleaning, and refitting.

Show in the manual (page 17)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend DHB-E 18/21/24 LCD?

Yes No
0
User Pic

nam_consequuntur

5 months ago

Does this tankless water heater maintain a stable temperature during continuous use?

0
User Pic

Manual.ly

5 months ago

Yes, this unit is designed to eliminate temperature fluctuations. Users report consistent warm water flow even with high demand from multiple fixtures. It successfully meets expectations for stable performance without the cold-water swings common in older models. Installation is straightforward for most plumbing setups and delivery is prompt.

M: QW-35-FL
M: QW-35-FL

Frequently Asked Questions

A

For devices used in private households, the warranty period is twenty-four months. For commercial or industrial use, it is twelve months from the start date.

Is this answer helpful?

A

Yes, it is suitable for nethermning preheated water. Ensure the inlet temperature does not exceed 55 degrees Celsius for shower operation safety.

Is this answer helpful?

A

Yes, an internal anti-scalding protection limits the temperature range. For shower use, contractors should set it to 55 degrees Celsius or lower.

Is this answer helpful?

A

Locate the reset button on the safety switch. Press it firmly to activate the switch if the device was delivered deactivated or trip occurred.

Is this answer helpful?

A

The specific electrical resistance of the water must not fall below the values on the type plate. Check local water supply data for conductivity limits.

Is this answer helpful?

A

Yes, you can select the temperature unit. Turn the selector past OFF five turns to enter unit selection mode and choose Fahrenheit.

Is this answer helpful?

A

Check taps regularly. Use a damp cloth for the device exterior. Descaling agents can be used commercially for limescale at the outlets.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Instant hot water supply ensures no waiting time for users.
  • Energy efficient class A rating saves electricity bills significantly.
  • LCD display allows easy temperature adjustment and monitoring.
  • Air detection system protects heating element from damage.
  • Multiple power variants suit different household flow needs.
VS

Disadvantages

  • Higher power models require three-phase electrical connection.
  • Installation must be performed by a qualified electrician only.
  • Water resistivity must meet specific standards to prevent issues.
  • Temperature may drop if flow rate exceeds device capacity.
  • Regular descaling needed to maintain efficiency over time.
M: QW-35-FL

Product Specification

Energy Efficiency Class

A (A+ to F)

Rated Power

18/21/24kW (400V)

Rated Current

29/31/35A

Circuit Protection

32/35A

Temperature Control

68-140°F, continuous

Capacity

13.53 fl oz

Construction

closed (pressure-resistant)

Mounting Type

Under-counter, Over-counter

Connection

1/2"

Display

yes

Features

electronic control, fan detection system, bare wire heating system

Ingress Protection

IP25

Dimensions

8.86x18.35x4.57in (WxHxD)

Weight

7.05 lbs

M: QW-35-FL

Product Description

Stiebel Eltron DHB-E 18/21/24 LCD Electric Instant Water Heater Manual Overview

The Stiebel Eltron DHB-E 18/21/24 LCD Electric Instant Water Heater Manual provides extensive information for users and installers. This electronically controlled device offers instant heating, eliminating the need for cold showers during peak demand times. The unit features a sleek LCD display, allowing users to set precise temperatures between 20 and 60 degrees Celsius with ease. This level of control ensures comfort while maximizing energy efficiency for daily household activities.

Installation flexibility is a key strength of this product line. Whether your bathroom layout involves undersink or oversink mounting, the DHB-E adapts to finished or unfinished wall scenarios effectively. The documentation details various connection options, including solder fittings and press-fit systems, ensuring compatibility with different plumbing standards. Safety is paramount, with built-in anti-scalding protection preventing water temperatures from exceeding 55 degrees Celsius when configured for shower operation. This feature is crucial for households with children or elderly residents who might be more vulnerable to burns from hot water.

The heating system utilizes a blank wire design enclosed in a pressure-resistant plastic jacket. This technology ensures the device remains largely insensitive to scale build-up, making it suitable for both hard and soft water areas. Additionally, an air detection system protects the heating element by shutting down power for a minute if air enters the unit during operation, preventing damage to the internal components. For energy consciousness, the device achieves an energy efficiency class A rating, significantly reducing electricity consumption compared to older storage models found in older homes.

Technical data indicates three specific power variants within the 18/21/24 series, catering to different flow rate requirements based on outlet count and usage. Proper electrical installation is mandatory, requiring fixed wiring and compliance with specific voltage standards, typically three-phase power for the higher kilowatt outputs needed. Maintenance involves regular checks of taps for limescale and ensuring the device remains free from frost risks during non-use in colder climates to prevent cracking.

Users should register their product online to access quick service help in warranty cases. The warranty period typically spans twenty-four months for domestic use cases. Troubleshooting is aided by diagnostic LED lights that indicate power status or faults clearly. This comprehensive appliance delivers consistent hot water on demand, combining robust engineering with user-friendly controls for a superior bathing and washing experience in today.

M: QW-35-FL

© Copyright 2026 Manual.ly