Manual.ly Logo

Spinder SL3 Manual

0.0 · 0 Ratings

PDF manual · 92 Pages

English

M: QW-35-FL
page

/ 92

Loading...
69896ee194a22daf84c54791a75c9cdf5b7e page 40
64
CLEANING AND MAINTANANCE
Under normal conditions and use, the bike carrier only requires cleaning, and is
otherwise maintenance free.
Clean the bicycle carrier regularly when used in coastal areas or in winter
conditions in order to wash off any salt and prolong the service life of the bicycle
carrier.
The bike carrier can be cleaned with a mild cleaning agent, with warm water
and/or a soft cloth. First remove any coarse dirt and dust.
Do not use any solvents or similar cleaning agents, since these can
damage the bike carrier.
Leave the bike carrier to dry on its own. Do not use any electrical driers or other
heating equipment to speed up the drying process.
Clean the bike carrier regularly when used in coastal areas or in winter conditions
in order to wash off any salt and prolong the service life of the bike carrier.
Store the bike carrier in a dry and protected area when not used for extended
periods (e.g. over winter) in order to prolong the service life of the bike carrier.
Always slide the bicycle carrier back into the transport position so no dirt or dust
can remain in the sliding mechanism and limit a smooth sliding. In case of
fouling of the sliding mechanism, rinse it with water.
Check the bike carrier for wear before the start of every journey.
Defective parts and straps must be replaced.
The steel parts of the bike carrier are protected in the works against corrosion by
a powder coating. If this paint coating is damaged, please have the damage
rectified professionally as soon as possible.
Please refer to our customer service for the replacement of parts.
Any modification of original parts and materials or the construction of bike carrier
can adversely affect its safety and serviceability.
DISPOSAL
Local regulations must be observed for the disposal of the product.
The packaging should also be sorted by type and disposed of in the relevant
collection containers.
Further information is available from your communal disposal point.

Chat with your Spinder SL3 manual using AI

Get instant AI answers from your Spinder SL3 manual

Ask anything about the Spinder SL3. Answers come from this manual, with the pages they are based on.

SL3 Maintenance Schedule

Before every journey
Check strap condition and attachment

Inspect safety straps for damage or wear before each trip. Ensure they are firmly attached to the frame and wheels. Replace damaged straps immediately.

Show in the manual (page 53)
Before every journey
Check lighting system operation

Verify that all lights on the bike carrier function correctly. Check the connection between the plug and the vehicle socket. Replace defective bulbs if necessary.

Show in the manual (page 57)
After a few kilometers
Re-check coupling attachment security

The carrier settles after initial driving. Check the attachment to the trailer coupling after a few kilometers. Re-tighten or adjust the quick connector if loose.

Show in the manual (page 53)
Regularly (coastal/winter)
Clean carrier to remove salt

If used in coastal areas or winter conditions, clean regularly with mild detergent and warm water to wash off salt. Do not use solvents. Air dry only.

Show in the manual (page 64)
After use
Slide carrier back to transport position

Always slide the carrier back into the transport position after use to prevent dirt accumulation in the sliding mechanism which hinders smooth operation.

Show in the manual (page 64)
As needed
Rinse sliding mechanism if fouled

If the sliding mechanism is dirty or fouled, rinse it with water to ensure smooth gliding and proper locking of the carrier.

Show in the manual (page 64)
Before every journey
Check carrier for general wear

Inspect the entire bike carrier for signs of wear or damage before starting any journey. Defective parts must be replaced by authorized components.

Show in the manual (page 64)
M: qwen/qwen3.8-flash

Ask a Question

0/1000

Do you recommend SL3?

Yes No

Frequently Asked Questions

A

The Spinder SL3 has a maximum carrying capacity of 60kg. This limit applies whether you are transporting two or three bikes depending on the configuration used.

Is this answer helpful?

A

No, you must never mount the Spinder SL3 on an aluminum tow bar. It requires a tow ball made of steel St52, grey cast iron GG52, or better quality to prevent breakage.

Is this answer helpful?

A

You can slide the carrier backwards to access the trunk. Unlock the sliding mechanism by lifting both knobs, then carefully push the carrier back. Always check that no body parts are in the way before moving it.

Is this answer helpful?

A

Yes, you should never exceed 130 km/h when driving with the Spinder SL3 mounted. Sudden steering movements should also be avoided to maintain stability.

Is this answer helpful?

A

If the carrier is loose, you must adjust the quick connector. Loosen the lock nut slightly, turn the setting screw a quarter turn tighter, and retighten the lock nut. Recheck the fit afterwards.

Is this answer helpful?

A

No, using a tarpaulin is strictly prohibited. Tarpaulins increase air resistance significantly and can fly off during driving, causing serious accidents.

Is this answer helpful?

M: QW-35-FL

Advantages and Disadvantages

Advantages

  • Durable steel and aluminum construction ensures long-lasting performance
  • Sliding mechanism provides easy trunk access without unloading bikes
  • Integrated LED lighting works with both 7-pin and 13-pin sockets
  • Optional adapter allows transport of up to three bicycles
  • Folding design makes storage and transport convenient when not in use
VS

Disadvantages

  • Requires strict adherence to tow ball material specifications to prevent breakage
  • Maximum speed limited to 130 km/h which may restrict highway travel
  • No tarpaulin allowed due to safety risks from wind resistance
  • Not suitable for off-road driving as it may cause structural damage
  • Regular inspection of straps and bolts is mandatory before every trip
M: QW-35-FL

Product Specification

Type

Bike rack

Mounting

Rear / Trailer hitch

Load capacity for sports equipment

3 bikes

Max load capacity

132.28 lbs

Features

Tail lights (13-pin)

Color

Black

Weight

48.50 lbs

M: QW-35-FL

Product Description

Spinder SL3 Manual: The Ultimate Guide to Secure Bike Transport

The Spinder SL3 is a robust and versatile bike carrier designed by Tradekar Benelux BV to ensure your bicycles are transported safely and efficiently. Whether you are heading out for a weekend ride or embarking on a long-distance cycling holiday, this manual provides comprehensive instructions for the proper installation, use, and maintenance of the Spinder SL3. This guide emphasizes safety above all else, ensuring that every user understands how to maximize the carrier's capabilities while minimizing risks.

Constructed from durable steel and aluminum, the Spinder SL3 offers a sleek design that can be folded away when not in use. It is capable of carrying up to two bicycles as standard, with an optional adapter (XB1) allowing it to transport three bikes. The carrier features a sliding mechanism that allows easy access to the vehicle's trunk without removing the bikes, though users must exercise caution to avoid damaging the car door. Safety is paramount, with detailed warnings regarding load limits, coupling requirements, and the importance of securing straps before every journey.

Key Features and Specifications

The Spinder SL3 is built to handle various bicycle types, accommodating wheelbases up to 140cm and tire widths up to 8cm. Its integrated LED lighting system ensures visibility on the road, compatible with both 7-pin and 13-pin trailer sockets. The carrier includes essential accessories like frame holders, wheel straps, and keys for locking the quick-release mechanism. Regular cleaning and maintenance are recommended, especially after exposure to salt or winter conditions, to prevent corrosion and ensure longevity.

Important Safety Notes

Always verify that your tow ball meets the minimum specifications of St52 steel or GG52 cast iron. Never exceed the maximum permissible ball load indicated on your vehicle's type plate. Ensure all straps are tight and undamaged before driving. Avoid using tarpaulins as they increase wind resistance and can become hazardous. By following these guidelines, you ensure a safe and enjoyable experience for yourself and other road users.

M: QW-35-FL

© Copyright 2026 Manual.ly