Spelsberg BCS Pure Manual
PDF manual · 12 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your Spelsberg BCS Pure manual using AI
Get instant AI answers from your Spelsberg BCS Pure manual
Ask anything about the Spelsberg BCS Pure. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend BCS Pure?
Yes NoFrequently Asked Questions
It is intended for light electric vehicles, including E-bikes, pedelecs, and E-scooters. Direct charging depends on the installed system connector, while other compatible batteries may be charged with their own external charger through a 230 V socket.
Is this answer helpful?
Depending on the installed version, direct charging supports selected Bosch Active Line, Active Line Plus, Cargo Line, Performance Line, and Performance Line CX batteries, plus Shimano BT-E6000, BT-E6001, BT-E6010, BT-E8010, and BT-E8020 models.
Is this answer helpful?
A flashing green LED means charging is in progress. A steady green LED means the charging point is ready or charging is complete. A red LED signals a fault at that charging point. No light means the charging point is off.
Is this answer helpful?
Yes. Batteries from other manufacturers can be charged through the integrated 230 V sockets using the relevant external charger. The socket load must not exceed 2.5 A, and extension cables or multi-socket adapters should not be used.
Is this answer helpful?
Use the station only when the outside temperature is between 0 degrees C and +40 degrees C. Outside this range, the system switches off to help protect the battery.
Is this answer helpful?
Remove the charging connector from the station immediately and inform the operator. Do not continue using a charging point showing a fault, and do not use the station if visible damage, damaged cables, or moisture are present.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Supports direct charging for selected Bosch and Shimano E-bike battery systems.
- Provides 230 V sockets with child protection for compatible external chargers up to 2.5 A.
- LED status lights clearly show readiness, active charging, completion, and faults.
- Allows charging flexibility for various LEVs, including E-bikes, pedelecs, and e-scooters.
- Covered design and external fixing lugs support organized installation and cable handling.
Disadvantages
- Operation is limited to ambient temperatures from 0 degrees C to +40 degrees C.
- The 230 V outlets have a 2.5 A maximum charging current and switch off with higher loads.
- External charger cable length must be below 3 m, with no extension cables or power strips.
- Direct connection compatibility depends on the installed connector configuration and battery model.
- Users must keep plugs, sockets, and cables dry, clean, and free from damage.
Product Specification
Number of charging points
1
Number of phases
single-phase
Voltage
230 V (AC)
Connection type
2x socket, 2x cable
Installation
wall-mounted
Protection rating
IP54
Dimensions
20.79 x 20.87 x 8.90 in (W x H x D)
Product Description
Spelsberg BCS Pure - Read, Download & Print Free
The Spelsberg BCS Pure is an E-bike charging station designed to support practical, organized charging for light electric vehicles such as E-bikes, pedelecs, and e-scooters. Built for locations where riders need dependable access to power, it combines direct battery connection options with protected 230 V sockets for compatible external chargers. Its clear layout and covered construction help make everyday charging easier to manage in public, commercial, residential, or workplace settings.
Flexible charging for common E-bike systems
Depending on configuration, the BCS Pure supports direct charging through system connectors for selected Bosch and Shimano battery families. Compatible Bosch options include Active Line, Active Line Plus, Cargo Line, Performance Line, and Performance Line CX. Supported Shimano battery types include BT-E6000, BT-E6001, BT-E6010, BT-E8010, and BT-E8020. Riders using other battery systems can connect their own charger through the integrated 230 V outlets.
The two socket connections include child protection and are intended for chargers drawing up to 2.5 A. This approach gives operators and users a useful balance between dedicated charging connections and broader compatibility with manufacturer-supplied charging equipment.
Clear status information during use
LED indicators beneath the housing cover provide an easy way to check each charging point. A flashing green light indicates an active charging process, while steady green confirms that the point is ready or that charging has finished. A red indicator identifies a fault, allowing users to stop charging and report the issue promptly. This simple visual feedback supports a smoother charging routine without unnecessary guesswork.
Designed around safe charging practices
The BCS Pure should be used only with clean, dry, undamaged plugs, cables, and battery connections. Charging is intended for ambient temperatures between 0 degrees C and +40 degrees C, helping protect batteries from unsuitable conditions. Users should avoid wet hands, moisture, cable strain, extension leads, and overloaded sockets. Vehicles should also not be left unattended while charging.
For external chargers, cable length between the station and bicycle socket must remain below 3 m. Chargers can become hot during operation and should be placed on a dry, non-flammable surface with adequate space to cool. These measures support reliable operation while reducing avoidable electrical, heat, and battery risks.
Notes
- Check battery, charger, and vehicle manufacturer guidance before connecting.
- Disconnect charging equipment immediately if a fault is indicated.
- The BCS Smart variant adds monitored charging, LAN connectivity, and optional BCS Finder app features.
Search for 67,706 Manuals online
Type-in Brand or Model