Manual.ly Logo

Solo by AL-KO Comfort 64xx Manual

0.0 · 0 Ratings

PDF manual · 548 Pages

English

M: gpt-5.6-terra
page

/ 548

Loading...
959a77beef6b3b2ba21237b839c80e4a7bf1 page 23
2500096_b 35
About these operating instructions
1 ABOUT THESE OPERATING
INSTRUCTIONS
■
The German version is the original operating
instructions. All additional language versions
are translations of the original operating in-
structions.
■
Always safeguard these operating instruc-
tions so that they can be consulted if you
need any information about the appliance.
■
Only pass on the appliance to other persons
together with these operating instructions.
■
Comply with the safety and warning informa-
tion in these operating instructions.
1.1 Symbols on the title page
Symbol Meaning
It is essential to read through these
operating instructions carefully be-
fore start-up. This is essential for
safe working and trouble-free han-
dling.
Operating instructions
Never operate the petrol powered
device in the vicinity of open flames
or heat sources.
1.2 Legends and signal words
DANGER!
Denotes an imminently dangerous situa-
tion which will result in fatal or serious
injury if not avoided.
WARNING!
Denotes a potentially dangerous situa-
tion which can result in fatal or serious
injury if not avoided.
CAUTION!
Denotes a potentially dangerous situa-
tion which can result in minor or moder-
ate injury if not avoided.
IMPORTANT!
Denotes a situation which can result in
material damage if not avoided.
NOTE
Special instructions for ease of under-
standing and handling.
2 PRODUCT DESCRIPTION
These operating instructions describe a hand-op-
erated chain saw that is powered by a petrol en-
gine.
2.1 Intended use
The chain saw is exclusively designed for domes-
tic gardening applications. In this application area
the chain saw can be used for wood sawing
work, e.g. for:
■
Sawing of tree trunks
■
Sawing of squared timbers
■
Sawing of branches, depending on the length
of cut
The chain saw must only be used outdoors for
working with wood. While in use, it is necessary
to wear adequate personal protective equipment.
Further applications, such as professional tree
care within a tree, are expressly excluded. The
operator is liable for any damage caused by im-
proper operation. It is only permitted to use the
saw chains and bar combinations stated in the
operating instructions for this device. Any other
application not in accordance with the designated
use described here shall be regarded as misuse.
The chain saw must not be used in the commer-
cial sector.
CAUTION!
Danger of injury due to non-designat-
ed use!
If wood or other substances embedded
with foreign bodies are sawn with the
chain saw, injury can result.
■
Only use the chain saw for light
wood sawing work.
■
Before sawing wood, check for for-
eign bodies, e.g. nails, screws, fit-
tings.
2.2 Possible foreseeable misuse
■
Do not saw off any branches that are directly
or at an acute angle above the user or other
persons.
■
Do not use old oil.
■
Do not use the tool in a potentially explosive
atmosphere.

Chat with your Solo by AL-KO Comfort 64xx manual using AI

Get instant AI answers from your Solo by AL-KO Comfort 64xx manual

Ask anything about the Solo by AL-KO Comfort 64xx. Answers come from this manual, with the pages they are based on.

Ask a Question

0/1000

Do you recommend Comfort 64xx?

Yes No

Frequently Asked Questions

A

It is a petrol-powered chainsaw range for domestic outdoor wood cutting. The Comfort 6436 and 6442 can be used for logs, squared timber, and branches, provided the work stays within the guide bar cutting capacity and the saw is used correctly.

Is this answer helpful?

A

The Comfort 6436 has a 35.2 cc, 1.45 kW engine and a 35 cm guide bar with 33 cm usable cutting length. The Comfort 6442 has a 41.9 cc, 1.7 kW engine and a 40 cm guide bar with 37 cm usable cutting length.

Is this answer helpful?

A

Both models use a two-stroke petrol engine with unleaded petrol of at least 90 RON mixed with high-quality two-stroke oil. The required mixing ratio is 50:1, equal to 5 litres of petrol and 100 ml of oil.

Is this answer helpful?

A

Wear a protective helmet, eye or face protection, ear defenders, sturdy gloves, cut-resistant trousers, and safety footwear with grippy soles, toe protection, and cut-resistant inserts. Use the saw with both hands and work on firm, level ground.

Is this answer helpful?

A

With the engine switched off, lift the chain at the middle of the guide bar. The drive links should remain in the bar groove, while the chain should still move freely by hand. Adjust it if it is too loose or too tight.

Is this answer helpful?

A

Before each use, inspect the saw, chain brake, lubrication, chain condition, and general condition. Clean the air filter regularly, inspect the spark plug, maintain the guide bar, and sharpen the chain whenever cutting performance declines.

Is this answer helpful?

M: gpt-5.6-terra

Advantages and Disadvantages

Advantages

  • Two model options provide 33 cm or 37 cm usable cutting lengths for different garden wood-cutting needs.
  • Petrol two-stroke engines offer 1.45 kW on the 6436 and 1.7 kW on the 6442.
  • Chain brake, safety lock, hand guard, and bumper spike support controlled operation.
  • Primer-assisted easy-start system helps simplify cold-start preparation.
  • Adjustable chain lubrication and routine service guidance support long-term performance.
VS

Disadvantages

  • Designed for domestic garden use and not intended for commercial work or professional tree care.
  • Requires careful fuel mixing at a 50:1 petrol-to-two-stroke-oil ratio.
  • Produces substantial noise, with a guaranteed sound level of 113 dB(A).
  • Regular chain tension checks, lubrication, cleaning, and sharpening are essential.
  • Petrol exhaust, vibration, kickback, and moving-chain risks require full protective equipment.
M: gpt-5.6-terra

Product Specification

Type

Chainsaw

Chain speed

75.13 ft/s

Chain pitch

3/8 in

Chain oil tank

7.78 fl oz

Tank capacity

9.13 fl oz

Noise level

113 dB(A)

Included

Guide bar (Oregon), saw chain (Oregon)

M: gpt-5.6-terra

Product Description

Solo by AL-KO Comfort 64xx Petrol Chainsaw - Read, Download & Print Free

The Solo by AL-KO Comfort 64xx Petrol Chainsaw range is designed for domestic outdoor wood-cutting tasks, combining petrol-powered performance with practical safety features. The range includes the Comfort 6436 and Comfort 6442 models, suited to cutting logs, squared timber, and branches within their respective guide bar capacities. These chainsaws are intended for private garden work rather than commercial forestry or professional tree care.

Petrol Power for Garden Woodwork

Both models use a two-stroke petrol engine and require a 50:1 mixture of unleaded petrol and quality two-stroke oil. The Comfort 6436 has a 35.2 cc engine rated at 1.45 kW, while the Comfort 6442 increases displacement to 41.9 cc and output to 1.7 kW. This makes the larger model a useful option for users who need extra cutting capacity for thicker firewood and larger garden timber.

The 6436 is fitted with a 35 cm guide bar with a usable cutting length of 33 cm. The 6442 uses a 40 cm guide bar with a usable cutting length of 37 cm. Both chainsaws achieve a maximum chain speed of up to 22.86 m/s, use a 3/8 inch chain pitch, and include a primer-assisted easy-start system for more convenient starting.

Designed Around Safe Handling

Safe chainsaw operation depends on correct technique, maintenance, and protective equipment. The Comfort 64xx range includes a chain brake that stops the chain quickly in the event of kickback, plus a safety lock that must be pressed before the throttle can be used. A front hand guard, bumper spike, chain guard, and clear machine symbols support controlled use and safer transport.

The chainsaw should always be held with two hands, using the rear handle with the right hand and the front handle with the left. Users should wear a helmet, eye protection, ear defenders, gloves, cut-resistant trousers, and sturdy protective footwear. Work only outdoors, on stable ground, and keep people, animals, and obstacles away from the cutting area.

Care That Supports Reliable Cutting

Regular maintenance helps preserve cutting quality and reduce wear. Check chain tension, chain lubrication, and chain-brake operation before each use. Keep the air filter clean, inspect the spark plug, and sharpen the chain when it produces dust instead of chips or requires excessive pressure to cut. The guide bar should be cleaned and turned regularly to promote even wear.

Notes

  • Use biodegradable chainsaw oil rather than used or mineral oil.
  • Do not run the engine indoors because exhaust fumes are hazardous.
  • Allow the saw to cool before storage, and fit the chain guard before carrying or transporting it.
  • Felling trees and advanced cutting techniques should be handled only by trained, experienced users.
M: gpt-5.6-terra

© Copyright 2026 Manual.ly