Manual.ly Logo

Soehnle Shape Sense Connect 200 Manual

4.1 · 8 Ratings

PDF manual · 60 Pages

English

M: OA-GPT-5-NAN
page

/ 60

Loading...
d64a85f3731149bedea353b85f1d8d5a0137 page c
11
A. Operating elements
1. Minus ( )
2. Confirm ( )
3. Plus ( )
Sensor touch:
Only touch the keys softly!
B. Preparation
1. Insert batteries (3 x 1.5 V AAA).
Note: Immediately (as long as „0.0“ is still
being displayed) place the body analysis scale
on a level surface and wait until the scale
powers down automatically.
Then begin with data entry. Otherwise, it might
be possible that the weight of the scale would
erroneously be added to the initial weighting
process.
The same might occur during regular opera-
tion if the scale is held in the hand prior to the
weighting process.
2. For all measurements, place scale level on a
hard surface (not on carpet).
3. Cleaning and care: Clean only using a slightly
damp cloth. Do not use solvents or abrasives.
Never submerge scale in water.
4. A country-specific option to switch from kg/
cm to st/in or lb/in is possible by pushing the
key on the bottom of the scale to switch units
C. Data input
1. Press button.
2. Use
/ buttons to select memory slot and
confirm with . ➞ P
3. Use the
/ buttons to set your height and
confirm with . ➞ H
4. In the next step, set your age and confirm
with
. ➞ A
5. Set gender and confirm with
. ➞ S
6. To finish, set the activity level and confirm with
. (Hold down key for 3 sec.). ➞ AC
AC Explanation Hrs per week
1 Hardly any physical activity
2
Slight, active, sitting and standing
activity
3
House and garden work, mainly
standing, sitting only occasionally
4
Athletes and people with plenty of
movement
Intensive training 5-10
hrs/week
5
Heavy manual labourer, highly active
athletes
Intensive training at
least 10 hrs/week
Athlete mode:
By setting the personal activity level, the re-
spective calorie requirement can be precisely
determined.
7.
Now immediately place the body analysis
scale on the floor, wait until the screen displays
„0.0“ and then step on the scale with bare feet.
The initial measurement is indispensable and
serves to store the data for later automatic
recognition of persons. If no person steps on
the scale, data input must be repeated. The
first body analysis is performed after a person
steps on the scale.
This scale is equipped with a Time-Out mode.
It will automatically switch off after approx. 40
seconds if no keys are pressed.
Alternative: You can also perform this step con-
veniently via the Soehnle Connect app, in which
case the data is transferred to the scale. The first
measurement is necessary, however. Once you
have entered the data on the scale for the recog-
nition of persons as described under C, the Soeh-
nle Connect app will automatically adopt this.
D. Body analysis
1. Place scale on a solid, level floor and wait until
scale switches off automatically.
Step on the scale with bare feet. Stand still.
2. Body weight and the other calculated data are
displayed.
3. If the determined values cannot be clearly allo-
cated to one user, the possible memory slots
will be displayed.
If the calculated weight can be allocated to
more than 2 users, other possible memory
slots will be displayed after 3 seconds.
Use the
/ keys ( = left, = right) to con-
firm the memory slot displayed there.
The scale measures the individual body values by
means of bioimpedance analysis (body fat percent-
age, body water, muscle mass), calculates the basic
metabolic rate per day (kcal) and the BMI (Body Mass
Index). The 9-segment status bar shows the respec-
tive deviation from the normal value (see overleaf).
The scale switches off automatically.
Note: If needed, the user can step off the scale as
soon as the first value appears on the display.
EN

Chat with your Soehnle Shape Sense Connect 200 manual using AI

Get instant AI answers from your Soehnle Shape Sense Connect 200 manual

Ask anything about the Soehnle Shape Sense Connect 200. Answers come from this manual, with the pages they are based on.

Shape Sense Connect 200 Maintenance Schedule

As needed
Replace batteries

Replace when the display shows Lo (low battery). Use 3 x 1.5 V AAA batteries.

As needed
Clean scale surface

Clean only with a slightly damp cloth. Do not use solvents or abrasives and do not submerge in water.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend Shape Sense Connect 200?

Yes No
0
User Pic

Laura Schneider

10 months ago

My smart scale shows very different body fat (KFA) values every day, even after 10 seconds and on the same surface. Are the readings reliable, and how can I get accurate results?

0
User Pic

Manual.ly

10 months ago

Body composition on BIA scales (like fat and muscle) is an estimate from body impedance, so day-to-day variations can happen, especially with hydration, meals, training, and even room conditions. For more consistent results: measure at the same time each day (ideally morning), on the same hard surface, and with the same user profile selected; avoid measuring right after eating, drinking alcohol, heavy training, or a hot bath; make sure the sensors are clean and dry and stand still until the reading stabilizes. If you still see extreme jumps (for example, large changes daily despite consistent conditions), check battery level, confirm the app/firmware is up to date, and contact support with a few measurement examples so we can troubleshoot your device.

M: OA-GPT-5-NAN
M: OA-GPT-5-NAN

Frequently Asked Questions

A

The scale provides body weight, body fat percentage, body water, muscle mass, BMI and basal metabolic rate using bioelectrical impedance analysis, and shows deviation from normal ranges on a 9-segment status bar.

Is this answer helpful?

A

Insert 3×1.5V AAA batteries, place the scale on a level hard surface, use the scale buttons to enter memory slot, height, age, gender and activity level, then wait for 0.0 and step on barefoot to complete the initial measurement for automatic recognition.

Is this answer helpful?

A

Enable Bluetooth on your smartphone, install the Soehnle Connect app (Android 4.4.4+/iOS 9+), follow the app’s device-setup flow or add device in 'My devices' to sync measurements; the app also integrates with Apple Health and Google Fit.

Is this answer helpful?

A

No. It is not suitable for people with electronic implants such as pacemakers. Children under 8 should only use it under supervision. Also avoid using it on wet surfaces due to slip risk.

Is this answer helpful?

A

Bioimpedance provides estimates influenced by hydration, recent exercise, time of day and surface stability. For best results, measure under consistent conditions and track trends rather than relying on single readings.

Is this answer helpful?

A

The scale displays alerts for low battery (Lo) and overload if maximum weight is exceeded (manufacturer lists max ~180–200 kg). Replace batteries when low and ensure weight is within the scale’s limit to avoid overload warnings.

Is this answer helpful?

A

Clean only with a slightly damp cloth; do not use solvents or abrasives, and never submerge the scale in water. Keep it on a firm level surface for measurements and remove batteries responsibly per local disposal rules.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Comprehensive body analysis: weight, body fat, body water, muscle mass, BMI and basal metabolic rate via bioelectrical impedance.
  • Bluetooth connectivity with Soehnle Connect app and integration with Apple Health and Google Fit for automated tracking.
  • Multiple user profiles and automatic recognition after initial setup measurement for convenient shared household use.
  • Clear nine-segment status bar and age/gender reference tables to help interpret measured values quickly.
  • Simple maintenance and setup: uses 3x AAA batteries, unit switching (kg/lb/st), auto power-off and straightforward cleaning.
VS

Disadvantages

  • Not suitable for people with electronic implants (e.g., pacemakers) — safety restriction.
  • Accuracy can be affected by improper placement (uneven surface) or if feet are not bare and dry during measurement.
  • Requires initial on-scale measurement for user recognition; failing to perform it may require repeating setup.
  • Limited to Bluetooth versions and minimum OS requirements (Android 4.4.4 / iOS 9) for full app functionality.
  • Bioimpedance readings can vary with hydration, time of day and recent activity; interpret trends rather than single readings.
M: OA-GPT-5-NAN

Product Specification

Operating Mode

Battery operated (3x AAA battery)

Material

Glass

Color

grey

Load Capacity

440.92 lb

Graduation

3.53 oz

Units of Measurement

kg, lb, st

Analysis Data

Body Mass Index, Calorie Requirement, Body Fat, Body Water, Muscle Mass

Memory Function

User Memory (for 8 people)

Display

yes

Special Features

automatic user recognition, athlete mode, automatic switch-on (Step-on), automatic switch-off

Smart Home

App control (Bluetooth)

M: OA-GPT-54-NAN

Product Description

Soehnle Shape Sense Connect 200 digitale Personenwaage Manual

The Soehnle Shape Sense Connect 200 is a modern digital body analysis scale that combines precise weight measurement with a multi-parameter body composition analysis and Bluetooth connectivity. Designed for home use, it delivers weight, body fat percentage, body water, muscle mass, BMI and basal metabolic rate using bioelectrical impedance analysis. The scale supports multiple user profiles and stores data for automatic user recognition after an initial setup measurement.

Equipped with a clear segmented status bar, the Shape Sense Connect 200 indicates deviations from normal ranges and helps users interpret results against age- and gender-specific reference tables. A dedicated athlete mode and configurable activity level let the scale tailor calorie and metabolic estimates more accurately for different lifestyles, from sedentary to highly active users.

Setup and daily use are straightforward: insert three AAA batteries, enter personal data (height, age, gender, activity level) on the scale or via the Soehnle Connect app, then step on barefoot for the first measurement to enable automatic recognition. The scale requires a flat, firm surface for accurate readings, and features a 0.0 standby prompt before stepping on. For extended tracking and extra features, the Soehnle Connect app syncs measurements via Bluetooth to iOS or Android devices and integrates with Apple Health and Google Fit.

The product manual highlights safety and usage notes: it is not suitable for people with electronic implants (e.g., pacemakers), not intended as a toy for children under 8 without supervision, and may present a slip hazard on wet floors. The scale supports unit switching (kg/lb/st) via a rear toggle, auto-power-off after ~40 seconds, and displays alerts for low battery, overload (max 180–200 kg depending on spec), or out-of-range measured values.

Material care is simple: clean with a damp cloth only, avoid solvents or submersion. The manual lists technical specifications including Bluetooth 4.x compatibility, 2.4 GHz frequency, power limits, user age range (17–99), and battery requirements. A three-year manufacturer warranty (via Leifheit AG) is provided with exclusions for wear, misuse, and batteries. Disposal instructions for batteries and electronics follow EU directives.

This scale suits users who want a reliable home device for weight and body composition tracking with app integration, multiple-user support and clear guidance for interpreting measures.

Notes

  • Initial measurement on the scale is required to enable automatic user recognition.
  • Use on a hard, level surface for accurate readings; avoid carpets.
  • Not suitable for people with pacemakers or electronic implants.
  • App requires Bluetooth 4.0+ and Android 4.4.4 / iOS 9 and up.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly