Manual.ly Logo

Soehnle AirFresh Clean Connect 500 Manual

4.6 · 7 Ratings

PDF manual · 138 Pages

English

M: OA-GPT-5-NAN
page

/ 138

Loading...
38a879aef2bfd4476f5ebf89e6a305ee49b7 page 8
6
6. Verschließen Sie das Gerät und drehen den
Schraubverschluss fest. Drehen Sie das Gerät
wieder richtig herum und stellen Sie es auf
einen festen Untergrund.
7. Schließen Sie das Netzkabel wieder an eine
Steckdose an und schalten Sie das Gerät ein.
Reinigung des Gehäuses
Schalten Sie das Gerät vor jeder Reinigung aus
und ziehen Sie den Netzstecker. Reinigen Sie das
Gehäuse des Airfresh Clean Connect 500 mit ei-
nem leicht angefeuch
teten Tuch.
10. Ersetzen des Filters
Der Kombifilter sollte nach ca. 4320 Betriebs-
stunden durch einen Neuen ersetzt werden.
Nach ca. 4320 Betriebsstunden blinkt automa-
tisch die Filterwechselanzeige (REPLACE Filter)
auf der Steuerungskonsole des Geräts. Verwen-
den Sie ausschließlich die Original Soehnle Filter!
Um den Filter zu wechseln, gehen Sie wie folgt
vor:
1. Schalten Sie das Gerät und ziehen Sie den
Netzstecker.
2. Öffnen Sie das Gerät wie zuvor in Kapitel 7
beschrieben und entnehmen Sie den Kombi-
filter (2.4).
3. Setzen Sie nun den neuen Kombifilter in das
Gehäuse ein. Vergewissern Sie sich dass die
neue Filtereinheit richtig eingesetzt ist.
4. Verschließen Sie das Gerät und drehen den
Schraubverschluss fest. Drehen Sie das Gerät
wieder richtig herum und stellen Sie es auf
einen festen Untergrund.
5. Schließen Sie das Netzkabel wieder an eine
Steckdose an und schalten Sie das Gerät ein.
6. Drücken Sie die rote "Reset Taste" um den Be-
triebsstundenzähler zurück zu setzten. Die
Taste befindet sich hinter den drei Zugangs-
schlitzen an der Seite des Produktes (1.1). Um
die Taste zu betätigen benutzen Sie bitte ei-
nen dünnen Gegenstand (z.B. eine Büroklam-
mer). Ein Signalton ertönt und die Kontroll-
leuchte der Filterwechselanzeige erlischt.
Der Betriebsstundenzähler ist nun wieder zu-
rückgesetzt.
11. Transport und Lagerung
Transport
WARNUNG!
Schalten Sie das Gerät vor dem Transport immer
aus. Ziehen Sie immer den Netzstecker aus der
Steckdose.
Lagerung
Wir empfehlen eine sorgfältige Reinigung Ihres
Airfresh Clean Connect 500, bevor Sie das Gerät
aufbewahren. Bitte achten Sie darauf, dass alle
Teile vor der Lagerung sauber und trocken sind.
Lagern Sie den Airfresh Clean Connect 500 an
einem kühlen trockenen Platz.
12. Fehlerbehebung
Bevor Sie eine der folgende
n Prüfungen durch-
führen, schalten Sie das Gerät aus und ziehen
Sie den Netzstecker.
Problem: Das Gerät funktioniert nicht
• Kontrollieren Sie, ob der Airfresh Clean Connect
500 an einer Stromquelle angeschlossen ist
• Kontrollieren Sie, ob der Filter richtig sitzt.
• Kontrollieren Sie, ob die Bodenabdeckung
richtig sitzt und mit dem Schraubverschluss
fest verschlossen ist.
DE

Chat with your Soehnle AirFresh Clean Connect 500 manual using AI

Get instant AI answers from your Soehnle AirFresh Clean Connect 500 manual

Ask anything about the Soehnle AirFresh Clean Connect 500. Answers come from this manual, with the pages they are based on.

AirFresh Clean Connect 500 Maintenance Schedule

Remind me when maintenance is due
Monthly
Clean the combination filter

Turn off and unplug device. Remove filter, wash pre-filter under running water, vacuum EPA and activated carbon filter. Ensure pre-filter is dry before reattaching.

Every 4320 hours
Replace the combination filter

Replace filter after approximately 4320 operating hours when the REPLACE FILTER indicator flashes. Use only original Soehnle filters and reset the counter.

Free maintenance reminders

Timed to your purchase date. Always free, unsubscribe anytime.

By submitting you agree to the privacy policy. Unsubscribe with one click in any email.
M: QW-35-FL

Ask a Question

0/1000

Do you recommend AirFresh Clean Connect 500?

Yes No
0
User Pic

Laura Schmidt

9 months ago

Does the air purifier for pollen allergies include a HEPA filter, or is it missing like some reviewers report?

0
User Pic

Manual.ly

9 months ago

The filter equipment can depend on the exact Airfresh model and the filter set you have installed. If your main concern is pollen and fine particles, please check the product specifications for your specific unit (especially what filter media it uses and whether HEPA is included). If HEPA is required, make sure you have a HEPA-equipped filter version or the matching HEPA replacement cartridge for your device. You can also look up the filter type on the label in the filter compartment or in the manual for your model.

M: OA-GPT-5-NAN
M: OA-GPT-5-NAN

Frequently Asked Questions

A

It uses a washable pre-filter for coarse dust and allergens, an EPA (fine-dust) filter plus activated carbon for particles, smoke and odors, and an optional UV-C lamp to inactivate microorganisms.

Is this answer helpful?

A

The unit signals a filter change after approximately 4,320 operating hours when the Replace Filter indicator flashes. Clean the washable pre-filter monthly; vacuum the EPA and activated carbon layers as needed.

Is this answer helpful?

A

Yes—connect via Bluetooth to the free Soehnle Connect app (Android ≥ 4.4.4, iOS ≥ 9.0, Bluetooth ≥ 4.0) to access remote control and data logging.

Is this answer helpful?

A

Controls include manual fan speeds (Low/Medium/High/Turbo), timer settings (2/4/8 hours), Automatic mode (adjusts fan to air quality), UV-C on/off, and Night mode which dims indicators while maintaining operation.

Is this answer helpful?

A

Noise levels range from about 30 dB on Low, 45 dB at Medium, 55 dB at High, to 62 dB at Turbo. Night mode reduces indicator lights and makes it suitable for bedrooms when run at lower fan speeds.

Is this answer helpful?

A

Keep the device away from water and flammable sprays, do not insert objects into air inlets, supervise children under eight, use only undamaged power cables, and use original Soehnle filters; follow all manual warnings.

Is this answer helpful?

A

The primary replacement is the Soehnle combination filter (part 68107). After replacing the filter, press the red Reset button behind the side access slots (use a thin tool like a paperclip) to reset the operating hours counter.

Is this answer helpful?

M: OA-GPT-5-NAN

Advantages and Disadvantages

Advantages

  • Multi-stage filtration (washable pre-filter, EPA, activated carbon) plus UV-C for microbes.
  • PM2.5 sensor with numeric readout and LED ring for instant air quality feedback.
  • Automatic mode adjusts fan speed to air quality, balancing performance and noise.
  • Bluetooth + Soehnle Connect app enables remote control and data logging.
  • Simple filter access and monthly maintenance; combination filter replacement indicator.
VS

Disadvantages

  • Not intended for commercial use—designed for domestic spaces up to ~40–50 m².
  • UV-C lamp safety requires proper use; avoid misuse and do not expose skin/eyes.
  • Combination filter replacement required after ~4,320 hours—ongoing consumable cost.
  • Noise increases at higher fan speeds (up to ~62 dB on Turbo).
  • Must use original Soehnle filters; third-party filters not recommended.
M: OA-GPT-5-NAN

Product Specification

Power

65W

Color

white, black

Recommended room size

up to 839.59 sq ft

Power levels

4

Air circulation

176.57 cfm

Filtering

EPA filter, activated carbon filter, pre-filter

Special features

Filter saturation indicator, night mode, timer, UV disinfection

Smart Home

App control

Dimensions

12.44x29.96x12.44in (WxHxD)

M: OA-GPT-54-NAN

Product Description

Soehnle AirFresh Clean Connect 500 — Smart, Quiet, Effective Air Purifier

The Soehnle AirFresh Clean Connect 500 is a compact, app-enabled air purifier designed for home use in rooms up to about 40–50 m². Combining a washable pre-filter, an EPA (fine-dust) filter, activated carbon and optional UV-C irradiation, the unit targets dust, pollen, smoke, odors and microorganisms. Its combination filter (part 68107) and UV-C lamp (approx. 20,000 h life, 254 nm) work together to reduce particulates and to inactivate bacteria, viruses and mold-related agents.

Featuring a PM2.5 sensor with a numeric display and a colored LED ring, the Clean Connect 500 reports real-time air quality levels and adapts fan speed accordingly in Automatic mode. Manual controls let you choose Low, Medium, High or Turbo fan speeds, enable UV-C, and set timer operation for 2, 4 or 8 hours. A Night mode dims indicators for undisturbed sleep while maintaining previously set functions. Connectivity is via Bluetooth and the free Soehnle Connect app for remote control and data logging (Android ≥4.4.4, iOS ≥9.0, Bluetooth ≥4.0).

Installation and maintenance are straightforward: place the unit upright with at least 0.5 m clearance, ensure vents remain unobstructed, and inspect the power cable before first use. The washable pre-filter should be rinsed monthly; the EPA and activated carbon layers are vacuum-cleaned. The complete combination filter should be replaced after about 4,320 operating hours—when the Replace Filter indicator flashes—and a reset button (accessible behind access slots) clears the runtime counter after replacement. Use only original Soehnle replacement filters for optimal performance.

Safety and care guidelines emphasize household use only, keeping the device away from water and flammable sprays, supervising children under eight, and avoiding operation with damaged cables. The unit is double-insulated (protection class II), rated 220–240 V, ~50/60 Hz, with nominal power around 65 W and sound levels ranging from about 30 dB (low) up to 62 dB (Turbo). The purifier weighs roughly 5 kg and includes a removable base for filter access and a screw cap closure.

Overall, the Soehnle AirFresh Clean Connect 500 suits users seeking a home air purifier with multi-stage filtration, UV-C antimicrobial support, intuitive local controls, and app-based monitoring and control. Routine filter care and timely replacement ensure sustained air quality improvement and reliable operation.

Notes

  • Use only Soehnle original filters (68107) to maintain warranty and performance.
  • Replace the combination filter after ~4,320 hours; clean the washable pre-filter monthly.
  • Maintain a minimum 0.5 m clearance from walls and avoid placing objects on top of the device.
  • Connect via the Soehnle Connect app for remote control, available on Google Play and the App Store.
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly