SKS Speedrocker Manual
PDF manual · 2 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your SKS Speedrocker manual using AI
Get instant AI answers from your SKS Speedrocker manual
Ask anything about the SKS Speedrocker. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend Speedrocker?
Yes NoFrequently Asked Questions
No, the Speedrocker set is not suitable for suspension forks. It is designed for rigid fork setups found on road, gravel and many mountain bikes without suspension travel.
Is this answer helpful?
Maintain a minimum distance of 15 mm between the tyre and the fender to avoid rubbing. This clearance ensures safe operation and prevents debris from trapping between tyre and guard.
Is this answer helpful?
The kit includes a front mudguard with silicone Velcro straps, a rear mudguard with elastic rubber straps, and small stays plus a frame protection foil. Front mounts tool-free with Velcro; rear fits with elastic straps and cut-to-fit stays.
Is this answer helpful?
Yes, the stays are intended to be trimmed or cut to fit specific frame geometries. Carefully measure and cut incrementally to achieve the correct length and alignment before final tightening.
Is this answer helpful?
A frame protection foil is included to place between straps/stays and paint, reducing risk of abrasion. Ensure the foil is positioned correctly and check periodically for wear.
Is this answer helpful?
The Speedrocker provides good splash and spray reduction for commuting and light gravel rides, but it offers less full-coverage protection than full-length touring fenders in prolonged heavy rain.
Is this answer helpful?
Elastic and silicone straps may eventually degrade. Replacement parts depend on retailer availability; contact SKS or an authorized dealer for spare straps or components.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Tool-free front installation with silicone Velcro straps for quick fit and removal.
- Lightweight, low-profile design suited to road and gravel bikes.
- Adjustable rear mounting with elastic straps and cut-to-fit stays for varied frame geometries.
- Includes frame protection foil to prevent strap-induced paint wear.
- German-made quality with focus on performance and minimal bulk.
Disadvantages
- Not compatible with suspension forks; limited to rigid fork setups.
- Requires at least 15 mm tyre-to-fender clearance; may not fit tight-clearance frames.
- Rear stays may need trimming and careful alignment during installation.
- Less coverage than full-length touring fenders in heavy rain.
- Elastic straps can degrade over long-term exposure and may need replacement.
Product Specification
Type
Set
Colors
black
Wheel size
28"
Tire width max.
1.65 in
Weight
0.90 lb
Product Description
SKS Speedrocker Schutzblechset Manual
The SKS Speedrocker Schutzblechset is a compact, versatile mudguard set designed for sporty road and gravel bikes that need lightweight, reliable splash protection. Crafted in Germany, the Speedrocker set focuses on quick mounting, minimal weight and unobtrusive design. It combines a front and rear fender with adjustable straps and simple stays to keep spray off rider and bike without the bulk of full-length touring guards.
Product overview
The front component uses silicon Velcro straps for secure, tool-free fitting around fork legs and axle areas. The rear section attaches using elastic rubber straps and a pair of small stays that can be trimmed to fit frame geometry. A protective frame foil is included to prevent abrasion where straps or stays contact the frame. The kit is optimized for close clearance setups; however, the manual emphasizes maintaining a minimum 15 mm gap between tyre and fender to avoid rubbing.
Key features
- Lightweight German engineering focused on performance and low drag.
- Tool-free front mounting via silicone Velcro straps.
- Elastic rear straps and cut-to-fit stays for flexible installation on a variety of frames.
- Frame protection film to prevent paint wear from straps or stays.
- Not suitable for suspension forks; intended for rigid forks and road/allroad/mountain setups without suspension travel.
The Speedrocker set is ideal for riders who want quick protection on commutes, impermanent wet conditions, or light gravel rides without committing to permanently mounted full fenders. Its modular design allows removal in dry conditions while providing effective spray reduction when needed.
Installation notes
Follow the included mounting instruction: fit the front mudguard with the silicone Velcro straps, attach the rear with elastic rubber straps and align stays to the seat tube and chainstay area. Trim stays as necessary for a snug fit. Keep at least 15 mm clearance between tire and fender. Do not use on bikes with suspension forks.
Notes:
- Ensure the 15 mm minimum clearance is observed to prevent rubbing.
- Use the frame protection foil where straps contact paintwork.
- Stays are designed to be trimmed for a custom fit.
Search for 67,706 Manuals online
Type-in Brand or Model