Manual.ly Logo

SKS Raceblade Long Manual

0.0 · 0 Ratings

PDF manual · 2 Pages

English

M: qwen/qwen3.5-flash-20260224
page

/ 2

Loading...
c01ed20939812b5fa0b780ffb9de72964cdf page 2
MADE IN GERMANY SKS-GERMANY.COM
GERMANY
MOUNTING INSTRUCTION RACEBLADE LONG ¬ 11310 + 11311
EN. INITIAL INSTALLATION INSTRUCTIONS
SKS-GERMANY recommends initial installation of the RACEBLADE LONG mudguards be performed by a bicycle shop mechanic
or by a competent person.
1
Install the alloy lugs by inserting the circular alloy lugs into the fixation points at the stay ends with the circular fixation points of the
alloy lugs facing inward.
2
Position the stays approximately in the middle of the profile by sliding them fore and aft on the profile.
3
Remove the bolts of the caliper brakes.
4
Slide the correct (for your frame geometry) brake brackets 3,4 or 5 between brake and fork/frame. Retighten the bolts of the brakes to the
proper manufacturer recommen ded torque (generally max. 8-10 Nm).
5
Slide the mudguard profiles F & R and the extensions 1+2 onto the mounted brackets. Be sure to feel the mudguard »click« into place.
6
Remove the quick-release axle skewers and the springs.
7
Attach the lugs along with the mudguards to the dropouts and clamp them securely by the skewers as recommended by manufacturer.
Quick-release skewers should be checked for tightness before each ride.
8
Loosen the square drive screws for adjusting the proper profile‘s distance to the tyre.
9
The minimum distance between the tyre and the mudguard must be 15mm.
10
After the adjustment retighten the screws (max. 2 Nm). These screws should be checked before each ride as vibration can cause them to loosen.
11
If necessary shorten the mudguard extension ➋ at the rear wheel to the required length with robust scissors. The minimum distance between the
mudguard and frame must be 15mm.
As needed rider can clip the mudguard sections on and off within seconds while the brackets and lugs may always remain attached to your bike.
ATTENTION! SKS-Germany is not liable for damages resulting from failing to comply with the installation instructions as well as misuse
of the product. Check the right and firm fit of the mudguards as described above before each ride. Equally SKS-Germany is not liable for
any damage to frame coating or carbon layer resulting from the use of this product.
PACKAGING CONTENS:
1 x RACEBLADE LONG front
1 x RACEBLADE LONG rear
1 x Extension front
1 x Extension rear
4 x Bracket long
1 x Bracket short
1 x Bracket extra long
for 1,5" forks
4 x Alloy lug
ROAD
ALLROAD
MOUNTAIN
MONTAGEVIDEO
MOUNTING VIDEO

Chat with your SKS Raceblade Long manual using AI

Get instant AI answers from your SKS Raceblade Long manual

Ask anything about the SKS Raceblade Long. Answers come from this manual, with the pages they are based on.

Raceblade Long Maintenance Schedule

Before each ride
Check quick-release skewers

Quick-release skewers should be checked for tightness before each ride.

Before each ride
Check adjustment screws

Screws for adjusting the mudguard profile distance to the tyre should be checked before each ride as vibration can cause them to loosen.

Before each ride
Check mudguard fit

Check the right and firm fit of the mudguards as described in the installation instructions before each ride.

M: QW-35-FL

Ask a Question

0/1000

Do you recommend Raceblade Long?

Yes No

Frequently Asked Questions

A

It is recommended that initial installation be performed by a bicycle shop mechanic or by a competent person to ensure safety standards and proper fit.

Is this answer helpful?

A

The minimum distance between the tyre and the mudguard must be 15mm. The minimum distance between the mudguard and frame must also be 15mm.

Is this answer helpful?

A

Yes, the rider can clip the mudguard sections on and off within seconds while the brackets and lugs may always remain attached to the bike.

Is this answer helpful?

A

Generally, the re-tightening of brake bolts should follow manufacturer recommendation, generally maxing out at 8-10 Nm for safety.

Is this answer helpful?

A

Yes, profiles can be adjusted by loosening square drive screws. The distance to the tyre must be checked and tightened to max 2 Nm.

Is this answer helpful?

A

The set includes front and rear guards, front and rear extensions, four long brackets, one short bracket, one extra long bracket for forks, and four alloy lugs.

Is this answer helpful?

A

SKS-Germany is not liable for damage to frame coating or carbon layer resulting from the use of this product if instructions are not followed.

Is this answer helpful?

M: qwen/qwen3.5-flash-20260224

Advantages and Disadvantages

Advantages

  • German Engineering Quality
  • Quick Release Clipping System
  • Comprehensive Bracket Selection
  • 15mm Minimum Clearance Safety
  • Includes Alloy Lugs
VS

Disadvantages

  • Requires Competent Initial Installation
  • Torque Settings Sensitivity
  • Liability if Misconfigured
  • Frame Coating Risk Possible
  • Detailed Adjustment Needed
M: qwen/qwen3.5-flash-20260224

Product Specification

Type

Set

Colors

Black

Wheel Size

28"

Tire Width Max.

0.98"

Weight

1.02 lbs

M: qwen/qwen3.5-flash-20260224

Product Description

SKS Raceblade Long Excellence for Cyclists

Premium German Engineering

The SKS Raceblade Long Schutzblechset schwarz represents the pinnacle of bicycle mudguard technology crafted in Germany. Every cyclist knows the frustration of wet roads and mud splashes damaging equipment and comfort. This specific product offers a robust solution designed for both road and mountain applications. Riders seeking versatility will appreciate the adaptable design that fits various frame geometries. The black finish ensures a sleek look that does not stand out on aesthetic builds. While the installation requires precision, the long-term payoff is significant durability and protection. It is available under part numbers 11310 and 11311, ensuring compatibility across different setups. This system is known globally for its reliability in harsh weather conditions.

Installation and Performance

Initial setup is best handled by a competent mechanic to ensure safety standards are met. The kit includes alloy lugs that lock into place securely without compromising frame integrity. Users can adjust the profile distance to maintain at least 15mm spacing from the tire. This clearance prevents dangerous rubbing while maximizing splash protection. The quick-release mechanism allows sections to be clipped on and off in seconds. This feature is ideal for riders who travel by train or store bikes indoors. Maintenance checks before each ride are highlighted in the guidelines to ensure screws remain tight. Vibration can loosen components over time, so regular verification prevents accidents. The brake brackets must be re-tightened to proper torque recommendations.

Comprehensive Components and Value

The packaging contains a wide array of parts to suit different bike types. Included components are front and rear guards along with necessary extensions. Brackets come in long, short, and extra long versions to fit forks ranging from standard to 1.5 inches. Alloy lugs are also provided for attaching to dropouts properly. The torque settings for brake brackets are critical, generally maxing out at 8-10 Nm. Adjustment screws should never exceed 2 Nm to avoid stripping threads. Safety is paramount as non-compliance may void liability protections. Despite the complexity, the system rewards careful assembly with reliable weather protection. The rear extension can be shortened if necessary with robust scissors.

Conclusion

For those prioritizing protection and quality, this mudguard set is a top choice. Whether facing rainy commutes or muddy trails, staying dry improves the riding experience significantly. The German manufacturing process guarantees high standards of quality control. Cyclists should always inspect the fit firmly before hitting the road. This product stands out as a reliable accessory for serious riders who demand the best. Always ensure the minimum distance between mudguard and frame is maintained safely. Enjoy the ride without the hassle of water and dirt.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly