SKS Edge AL Manual
PDF manual · 2 Pages
English

Quick check
Incorrect answer, please try again.
Chat with your SKS Edge AL manual using AI
Get instant AI answers from your SKS Edge AL manual
Ask anything about the SKS Edge AL. Answers come from this manual, with the pages they are based on.
Ask a Question
Do you recommend Edge AL?
Yes NoVideo Manual
SKS Edge AL 56 Schutzblech Set 29 Zoll
Frequently Asked Questions
The kit is designed to accommodate common tyre widths such as 700 x 28c to 40c. The front and rear mudguard lengths (e.g., 446 mm front, 740 mm rear for certain part numbers) and adjustable stays allow fitting within that tyre range, but always check clearance after installation.
Is this answer helpful?
Assembly is straightforward for someone with basic bike maintenance skills. Standard hand tools are sufficient, and the manual specifies torque values (e.g., 1 Nm in some steps). You may need to remove the rear wheel for certain rear-mount configurations and source a few screws if not supplied.
Is this answer helpful?
Ensure a minimum 15 mm gap between fender and tyre as specified. Use the adjustable stays and sliding bridge to set the correct position, and double-check alignment after tightening fasteners to the recommended torque to prevent movement.
Is this answer helpful?
Yes—spacers for fitting on forks with disc brakes are included or referenced. Proper spacer installation is important to maintain correct clearance; some frames may require additional hardware, so review the fit before final assembly.
Is this answer helpful?
The SKS Edge AL 46 is made from solid aluminium with rounded edges and long profiles for splash protection. Manufactured in Germany, the set emphasizes durable construction and refined fitment for reliable performance over varied conditions.
Is this answer helpful?
Minor screws and specific fasteners may not be included in the scope of delivery. Replacement parts or missing screws can typically be sourced from SKS dealers or bike shops; consult the part numbers and fitment details in the manual.
Is this answer helpful?
Advantages and Disadvantages
Advantages
- Durable lightweight aluminum construction providing long-lasting splash protection.
- Long mudguard profiles offer extensive coverage for road, gravel, and mountain use.
- Modular fittings (spacers, stays, sliding bridge) support various frames and disc brakes.
- Adjustable stay lengths and sliding bridge angles enable fine-tuning for tyre clearance.
- Made in Germany quality and clear torque/installation guidance for secure mounting.
Disadvantages
- Some screws or minor fasteners may not be included and require separate purchase.
- Installation can require wheel removal and careful alignment, which may be time-consuming.
- Requires maintaining a minimum 15 mm clearance—limits fit on very tight frame geometries.
- May need specific spacers for certain disc-brake forks, adding complexity for some bikes.
- Aluminum can dent under heavy impact compared with some plastic alternatives.
Product Specification
Type
Set
Colors
black
Wheel size
28"
Max. tire width
1.65 in
Weight
1.20 lb
Product Description
SKS Edge AL 46 Schutzblechset Manual
The SKS Edge AL 46 Schutzblechset is a solid, precision-made aluminum mudguard set designed to keep riders clean and comfortable across road, all-road, and mountain conditions. Built in Germany, these guards feature rounded edges and long profiles that provide broad protection against water and road spray while maintaining a slim, elegant appearance. The aluminum construction balances durability with low weight, making the set suitable for daily commuting, gravel adventures, and longer touring rides.
Installation focuses on adaptability: the set includes stays, spacers, and a sliding bridge system to accommodate a wide range of frame geometries, fork types, and disc-brake setups. Clear torque recommendations and stepwise assembly—stay attachment, brake and frame fittings, sliding bridge orientation, and bottom bracket mounting—help ensure a secure fit and proper clearance. Special attention is drawn to maintaining a minimum 15 mm gap between tyre and fender to avoid rubbing and to using the correct spacers for frames with disc brakes.
The rear installation requires wheel removal for some configurations and offers two sliding bridge angles (90° and 0°) to align the fender with seatstays and chainstays. Length adjustments on both front and rear stays provide fine-tuning options so riders can set optimal positions for their tyre widths and riding needs. The kit’s parts list and profile widths are matched to common tyre sizes (e.g., 700 x 28c–40c) with specified front and rear mudguard lengths for good coverage.
Practical for workshops and home mechanics alike, the SKS Edge AL 46 set includes the essential fittings for most bikes, though a few screws may not be supplied and must be sourced separately. With German engineering, straightforward mounting instructions, and versatile hardware, the Edge AL 46 is a reliable choice for those seeking robust splash protection without sacrificing style or performance.
Notes
- Keep at least 15 mm clearance between fender and tyre.
- Some screws may not be included; check contents before installation.
- Use the recommended torque values when tightening stays and fittings.
Search for 67,706 Manuals online
Type-in Brand or Model